Series 74 Convoluted Tubing 712-380 - Types B, C, D, E, F & G User-Installable Bulkhead Fitting for Series 74 Helical Convoluted Tubing TYPES B, C, D, E, F, & G BULKHEAD 712 S 380 M 16 16 - 3 C Product Series TO BE USED WITH ADAPTERS AND TRANSITIONS SHOWN ON PAGES G-1 THROUGH G-19 O-RING A THREAD TYP B TYP TubingType (B, C, D, E, F & G) Angular Function S = Straight Length in 1/2 inch (12.7) increments (Example: 6 = 3.0 inches (76.2)) Minimum Length: 1.5 (38.1) Basic No. Dash No. (Table II) Finish (Table III) Dash No. (Table I) LENGTH ± .060 (1.52) .945 (24.0) MAX TUBING I.D. C TYP TYPES C & F ENVIRONMENTAL E MAX D MAX Wrench Flats LENGTH LENGTH E REF TYPES B, D, & E NON-ENVIRONMENTAL © 2003 Glenair, Inc. F REF TYPE G ENVIRONMENTAL CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-22 Series 74 Convoluted Tubing 712-380 - Types B, C, D, E, F & G User-Installable Bulkhead Fitting for Series 74 Helical Convoluted Tubing A THREAD DASH NO. CLASS 2B 06 7/16 - 28 UNEF 09 9/16 - 24 UNEF 10 9/16 - 24 UNEF 12 5/8 - 24 UNEF 14 11/16 - 24 UNEF 16 3/4 - 20 UNEF 20 7/8 - 20 UNEF 24 1 - 20 UNEF 28 1 3/16 - 18 UNEF 32 1 5/16 - 18 UNEF 40 1 1/2 - 18 UNEF 48 1 3/4 - 18 UNS 56 2 - 18 UNS 64 2 1/4 - 16 UN TABLE I B MAX .640 (16.3) .690 (17.5) .690 (17.5) .760 (19.3) .890 (22.6) .890 (22.6) 1.024 (26.0) 1.152 (29.3) 1.363 (34.6) 1.488 (37.8) 1.676 (42.6) 1.960 (49.8) 2.210 (56.1) 2.460 (62.5) TABLE II TUBING I.D. DASH NO. MIN MAX 06 .181 (4.6) .188 (4.8) 09 .273 (6.9) .281 (7.1) 10 .306 (7.8) .312 (7.9) 12 .359 (9.1) .375 (9.5) 14 .427 (10.8) .437 (11.1) 16 .480 (12.2) .500 (12.7) 20 .603 (15.3) .625 (15.9) 24 .725 (18.4) .750 (19.1) 28 .860 (21.8) .875 (22.2) 32 .970 (24.6) 1.000 (25.4) 40 1.205 (30.6) 1.250 (31.8) 48 1.437 (36.5) 1.500 (38.1) 56 1.688 (42.9) 1.750 (44.5) 64 1.937 (49.2) 2.000 (50.8) C MAX DASH DIA NO. TABLE II .188 (4.8) 06 .281 (7.1) 09 .312 (7.9) 10 .375 (9.5) 12 .438 (11.1) 14 .500 (12.7) 16 .625 (15.9) 20 .750 (19.1) 24 .875 (22.2) 28 1.000 (25.4) 32 1.250 (31.8) 40 1.500 (38.1) 48 1.750 (44.5) 56 2.000 (50.8) 64 D MAX 1.09 (27.7) 1.16 (29.5) 1.22 (31.0) 1.28 (32.5) 1.34 (34.0) 1.41 (35.8) 1.53 (38.9) 1.66 (42.2) 1.78 (45.2) 1.91 (48.5) 2.28 (57.9) 2.59 (65.8) 2.91 (73.9) 3.03 (77.0) E MAX .78 (19.8) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.22 (31.0) 1.28 (32.5) 1.41 (35.8) 1.53 (38.9) 1.71 (43.4) 1.84 (46.7) 2.16 (54.9) 2.46 (62.5) 2.78 (70.6) 3.03 (77.0) TABLE III SYMBOL FINISH B Olive Drab over Cadmium Plate J Gold Iridite over Cadmium Plate over Nickel M Electroless Nickel N Olive Drab over Cadmium Plate over Nickel © 2003 Glenair, Inc. 1. Metric dimensions (mm) are in parentheses. NC Zinc-Cobalt, Olive Drab NF Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) T NOTES: 2. Tubing shown for reference only. Bright Dip Cadmium Plate over Nickel CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-23