Revised April 1999 74LCXR162245 Low Voltage 16-Bit Bidirectional Transceiver with 5V Tolerant Inputs/Outputs and 26Ω Series Resistors in the Outputs General Description Features The LCXR162245 contains sixteen non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus oriented applications. The device is designed for low voltage (2.5V or 3.3V) VCC applications with capability of interfacing to a 5V signal environment. The device is byte controlled. Each byte has separate control inputs which could be shorted together for full 16-bit operation. The T/R inputs determine the direction of data flow through the device. The OE inputs disable both the A and B ports by placing them in a high impedance state. ■ 5V tolerant inputs and outputs In addition, all A and B outputs include equivalent 26Ω (nominal) series resistors to reduce overshoot and undershoot and are designed to sink/source up to 12 mA at VCC = 3.0V. The LCXR162245 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. ■ 2.3V–3.6V VCC specifications provided ■ A and B side outputs have equivalent 26Ω series resistors ■ 5.3 ns tPD max (VCC = 3.3V), 20 µA ICC max ■ Power down high impedance inputs and outputs ■ Supports live insertion/withdrawal (Note 1) ■ Flow through pinout ■ Implements patented noise/EMI reduction circuitry ■ Latch-up performance exceeds 500 mA ■ ESD performance: Human body model > 2000V Machine model > 200V Note 1: To ensure the high-impedance state during power up or down OE should be tied to VCC through a pull-up resistor: the minimum value or the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Order Number Package Number 74LCXR162245MEA MS48A 48-Lead Small Shrink Outline Package (SSOP), JEDEC MO-118, 0.300” Wide Package Description 74LCXR162245MTD MTD48 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “x” to the ordering code. Logic Symbol Pin Descriptions Pin Names © 1999 Fairchild Semiconductor Corporation DS500052.prf Description OEn Output Enable Input T/Rn Transmit/Receive Input A0–A15 Side A Inputs or 3-STATE Outputs B0–B15 Side B Inputs or 3-STATE Outputs www.fairchildsemi.com 74LCXR162245 Low Voltage 16-Bit Bidirectional Transceiver with 5V Tolerant Inputs/Outputs and 26Ω Series Resistors in the Outputs August 1998 74LCXR162245 Connection Diagram Truth Tables Inputs Outputs OE1 T/R1 L L L H Bus A0–A7 Data to Bus B0–B7 H X HIGH Z State on A0–A7, B0–B7 (Note 2) Bus B0–B7 Data to Bus A0–A7 Inputs Outputs OE2 T/R2 L L L H Bus A8–A15 Data to Bus B8–B15 H X HIGH Z State on A8–A15, B8–B15 (Note 2) Bus B8–B15 Data to Bus A8–A15 Note 2: A and B port inputs are still active Logic Diagram www.fairchildsemi.com 2 Symbol Parameter Value VCC Supply Voltage −0.5 to +7.0 VI DC Input Voltage −0.5 to +7.0 VO DC Output Voltage −0.5 to +7.0 Conditions Units V V Output in 3-STATE −0.5 to VCC + 0.5 Output in HIGH or LOW State (Note 4) IIK DC Input Diode Current −50 VI < GND IOK DC Output Diode Current −50 VO < GND +50 VO > VCC V mA mA IO DC Output Source/Sink Current ±50 mA ICC DC Supply Current per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Recommended Operating Conditions Symbol VCC Parameter Supply Voltage VI Input Voltage VO Output Voltage IOH/IOL (Note 5) Min Max Operating 2.0 3.6 Data Retention 1.5 3.6 0 5.5 HIGH or LOW State 0 VCC 3-STATE 0 5.5 VCC = 3.0V − 3.6V Output Current TA Free-Air Operating Temperature ∆t/∆V Input Edge Rate, VIN = 0.8V–2.0V, VCC = 3.0V Units V V V ±12 VCC = 2.7V − 3.0V ±8 VCC = 2.3V − 2.7V ±4 mA −40 85 °C 0 10 ns/V Note 3: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 4: IO Absolute Maximum Rating must be observed. Note 5: Unused pins (Inputs or I/O's) must be held HIGH or LOW. They may not Float. DC Electrical Characteristics Symbol VIH VIL VOH VOL II Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage Input Leakage Current IOH = −100 µA VCC (V) TA = −40°C to +85°C Min 2.3 − 2.7 1.7 2.7 − 3.6 2.0 V 2.3 − 2.7 0.7 2.7 − 3.6 0.8 2.3 − 3.6 VCC − 0.2 IOH = −4 mA 2.3 1.8 IOH = −4 mA 2.7 2.2 IOH = −6 mA 3.0 2.4 IOH = −8 mA 2.7 2.0 IOH = −12 mA 3.0 2.0 IOL = 100 µA 2.3 − 3.6 0.2 IOL = 4 mA 2.3 0.6 IOL = 4 mA 2.7 0.4 IOL = 6 mA 3.0 0.55 IOL = 8 mA 2.7 0.6 IOL = 12 mA 3.0 0.8 0 ≤ VI ≤ 5.5V 2.3 − 3.6 ±5.0 3 Units Max V V V µA www.fairchildsemi.com 74LCXR162245 Absolute Maximum Ratings(Note 3) 74LCXR162245 DC Electrical Characteristics Symbol IOZ (Continued) Parameter 3-STATE I/O Leakage TA = −40°C to +85°C VCC (V) Conditions 0 ≤ VO ≤ 5.5V Min 2.3 − 3.6 ±5.0 0 10 VI = VIH or VIL IOFF Power-Off Leakage Current VI or VO = 5.5V ICC Quiescent Supply Current VI = VCC or GND 2.3 − 3.6 20 3.6V ≤ VI, VO ≤ 5.5V (Note 6) 2.3 − 3.6 ±20 VIH = VCC −0.6V 2.3 − 3.6 500 ∆ICC Increase in ICC per Input Units Max µA µA µA µA Note 6: Outputs disabled or 3-STATE only. AC Electrical Characteristics TA = −40°C to +85°C, RL = 500Ω Symbol Parameter VCC = 3.3V ± 0.3V VCC = 2.7V VCC = 2.5V ± 0.2 CL = 50 pF CL = 50 pF CL = 30 pF Min Max Min Max Min Max tPHL Propagation Delay 1.5 5.3 1.5 6.0 1.5 6.4 tPLH An to Bn or Bn to An 1.5 5.3 1.5 6.0 1.5 6.4 tPZL Output Enable Time 1.5 7.3 1.5 8.0 1.5 9.5 1.5 7.3 1.5 8.0 1.5 9.5 1.5 6.4 1.5 6.9 1.5 7.7 1.5 6.4 1.5 6.9 1.5 7.7 tPZH tPLZ Output Disable Time tPHZ tOSHL Output to Output Skew (Note 7) 1.0 tOSLH Units ns ns ns ns 1.0 Note 7: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Parameter guaranteed by design. Dynamic Switching Characteristics Symbol VOLP VOLV Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL Conditions VCC (V) TA = 25°C Units Typical CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 0.25 CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 −0.35 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 −0.25 0.35 V V Capacitance Typical Units CIN Symbol Input Capacitance Parameter VCC = Open, V I = 0V or VCC 7 pF CI/O Input/Output Capacitance VCC = 3.3V, V I = 0V or VCC 8 pF CPD Power Dissipation Capacitance VCC = 3.3V, V I = 0V or VCC, f = 10 MHz 20 pF www.fairchildsemi.com Conditions 4 74LCXR162245 AC LOADING and WAVEFORMS Generic for LCX Family FIGURE 1. AC Test Circuit (CL includes probe and jig capacitance) Test Switch tPLH, tPHL Open tPZL, tPLZ 6V at VCC = 3.3 ± 0.3V VCC x 2 at VCC = 2.5 ± 0.2V tPZH,tPHZ GND Waveform for Inverting and Non-Inverting Functions 3-STATE Output High Enable and Disable Times for Logic Propagation Delay. Pulse Width and trec Waveforms Setup Time, Hold Time and Recovery Time for Logic trise and tfall 3-STATE Output Low Enable and Disable Times for Logic FIGURE 2. Waveforms (Input Characteristics; f =1MHz, tR = tF = 3ns) Symbol VCC 3.3V ± 0.3V 2.7V 2.5V ± 0.2V Vmi 1.5V 1.5V VCC/2 Vmo 1.5V 1.5V VCC/2 Vx VOL + 0.3V VOL + 0.3V VOL + 0.15V Vy VOH − 0.3V VOH − 0.3V VOH − 0.15V 5 www.fairchildsemi.com 74LCXR162245 Schematic Diagram Generic for LCX Family www.fairchildsemi.com 6 74LCXR162245 Physical Dimensions inches (millimeters) unless otherwise noted 48-Lead Small Shrink Outline Package (SSOP), JEDEC MO-118, 0.300” Wide Package Number MS48A 7 www.fairchildsemi.com 74LCXR162245 Low Voltage 16-Bit Bidirectional Transceiver with 5V Tolerant Inputs/Outputs and 26Ω Series Resistors in the Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD48 LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.