Oscilent Corporation IF SAW Filter | 815-IF43.75M-B Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 815-IF43.75M-B 15.9 x 5.9 Thru Hole Digital A/V & Broadcasting May 22 2003 . TYPE : 43.75 MHz Bandpass Filter 6.2 MHz Bandwidth PART NUMBER : 815-IF43.75M-B . Horizontal : 1.5 MHz/Div Veritical : 10 dB/Div Horizontal : 0.8 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 3 dB Bandwidth Minimum Typical Maximum Units 43.68 43.75 43.82 MHz - 13.0 15.0 dB 6.2 6.24 - MHz - 7.63 7.68 MHz Lower Sidelobe (35.0 ~ 39.7 MHz) 35 35.7 - dB Upper Sidelobe (47.8 ~ 55.0 MHz) 34 35.6 - dB Passband Ripple - 0.6 1.0 dB Group Delay Variation - 60 100 nsec Absolute Delay (at Fo) - 1.38 - µsec Temperature Coefficient - -72 - ppm/K 30 dB Bandwidth * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_815_if43_75b.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 815-IF43.75M-B Page 2 of 2 Source Impedance = 50 ohms Load Impedance = 2 Kohms / 3pF Part No.: 815-IF43.75M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_815_if43_75b.htm 12/28/2005