Oscilent Corporation IF SAW Filter | 816-IF43.75M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 816-IF43.75M-A 16.3 x 6.3 Thru Hole Digital CableTV Jan. 01, 2007 TYPE : 43.75 MHz IF SAW Filter for Digital Cable TV PART NUMBER : 816-IF43.75M-A OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Minimum Typical Maximum Units - 43.75 - MHz - 15.0 17.0 dB Operating Temperature Range -20 - +70 C Storage Tempature Range -40 - +85 C Temperature Coefficient - -72 - ppm/C Bandwidth at 3.0 dB - 6.0 - MHz Bandwidth at 30.0 dB - 7.6 - MHz Insertion Loss Fo - Attenuation: (Ref.: 43.75MHz) 41.22 MHz -0.7 0.3 1.3 dB 46.28 MHz -0.8 0.2 1.2 dB 40.75 MHz 1.5 2.5 3.5 dB - 0 - dB 46.75 MHz 1.5 2.5 3.5 dB 39.75 MHz 38 43 - dB 47.75 MHz 38 42 - dB 43.75 MHz (Reference frequency) - Relative Attenuation From 35.00 to 39.0 MHz 42 45 - dB From 39.0 to 39.75 MHz 37 41 - dB From 47.75 to 50.0 MHz 37 40 - dB From 50.0 to 55.0 MHz 42 45 - dB Group Delay Variation - 40 - ns Maximum DC Voltage - 10V DC - VDC PACKAGE OUTLINE (mm) Pin Descriptions: 1=In 2=In/Ground 3=Ground 4,5= Output FREQUENCY RESPONSE Oscilent Corporation IF SAW Filter | 816-IF43.75M-A Page 2 of 2 Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 816-IF43.75M-A