Series 1000 Hydraulic Brake Pressure Switch DESCRIPTION The Honeywell Series 1000 pressure switch is a small, low- With its IP65 sealing and high burst rating, Honeywell’s Series cost switch actuated by hydraulic fluid or gas. The switch is 1000 switch often excels in harsh environments such as highly responsive for low-set-point and high burst rating extreme weather conditions or particle-filled areas. In addition requirements, and may also be used when converting the to its high resistance to shock and vibration, this pressure brake system to hydraulic applications. switch is designed to maintain its tolerances across temperature ranges in high system pressure environments. POTENTIAL APPLICATIONS FEATURES • • • • • Low set point: actuates at 20 psi Reduced part count High burst rating (for high cost-of-failure applications) Banjo bolt fitting Sealed to IP65 BENEFITS • • • • • Low set point is highly responsive Reduced field failures at part level Enhanced reliability, lowers warranty costs Minimized footprint Designed for use in high shock and vibration along with most extreme weather conditions • • • • • Small vehicle brake light actuation Compact agricultural tractors Utility vehicles (UTVs) Trucks and lift trucks Small self-propelled vehicles Series 1000 SPECIFICATIONS Characteristic Type Circuitry Connector size Terminals Set point Operating pressure, max. Proof pressure Burst pressure Operating temperature Operating media Electrical rating Contacts Diaphragm Housing Base Spring Connector options DIMENSIONS 2 www.honeywell.com/sensing Parameter Direct acting Normally open M10 x 1.25 banjo fitting 6,3 mm [0.25 in] blade 20 psi ±10 psi [1,37 bar ±0,69 bar] 1200 psi [82,74 bar] 2400 psi [165,47 bar] 4800 psi [330,95 bar] -40 °C to 121 °C [-40 °F to 250 °F] DOT 3 or 4 brake fluid 12 Vdc with two-1157 bulbs (4.4 A) Silver plated copper EPDM Rynite 545 glass filled Trivalent plated steel 17-7 PH stainless steel M10 x 1.25 double banjo; M10 x 1, 1/8-27 NPT Hydraulic Brake Pressure Switch ORDER GUIDE Catalog Listing 83355 Description 83354 Series 1000 hydraulic brake pressure switch, normally open, 20 psi, M10 x 1.25 double banjo fitting, blade terminals Series 1000 hydraulic brake pressure switch, normally open, 20 psi, M10 x 1.25 single banjo fitting, blade terminals WARNING WARNING PERSONAL INJURY MISUSE OF DOCUMENTATION DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: [email protected] Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, Minnesota 55422 www.honeywell.com/sensing 009581-1-EN IL50 GLO Printed in USA October 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.