ISSUE 2 Installation Instructions for the PK 88830 MICRO SWITCH SS100 Series Surface Mount Hall Effect Sensors GENERAL INFORMATION SS100 Series Hall effect sensors have an NPN (current sinking) output. The small SOT89 style package surface mounts on PC boards and flexible circuits. SOLDERING INSTRUCTIONS Exposure to high temperatures should be kept at a minimum. MICRO SWITCH recommends a convection infrared reflow process with peak temperatures not to exceed 220°C (428°F) for 20 seconds maximum. DO NOT wave solder this product. Performance and reliability may be negatively affected. Subjecting these products to wave soldering will void MICRO SWITCH’s warranty. These products are NOT suitable for protection against personal injury. To AVOID personal injury or death, DO NOT USE these products as emergency stop or safety devices, or in any other application where human safety is at risk. CLEANING Use agitated rinse. Do not use pressure wash. High pressure stream could force contaminants into sensor package. SS100 Series sensors are Category 2 ESD sensitive per DOD-STD-1686A. Perform assembly operations on tables with conductive tops, with operators grounded. ABSOLUTE MAXIMUM RATINGS Supply Voltage Voltage externally applied to output Output ON current Temperature Operating Storage Magnetic Flux -1 to +30 VDC +30 VDC max. (OFF condition only) -0.5 VDC min. (OFF or ON condition) 50 mA max. -40 to +150°C (-40 to +302°F) -55 to +150°C (-67 to +302°F) No limit. Circuit cannot be damaged by magnetic overdrive. Absolute maximum ratings are the extreme limits that the device will withstand without damage to the device. However, the electrical and mechanical characteristics are not guaranteed as the maximum limits (above recommended operating conditions) are approached, nor will the device necessarily operate at absolute maximum ratings. OPERATING CHARACTERISTICS Supply Voltage Min. 3.8 Typ. Max. 30 Remarks VDC Current Consumption Output Voltage (operated) Output Current (operated) 0.15 10 0.40 20 mA mA Sinking 20 mA max. Output Leakage Current (released Output Switching Time Rise, 10 to 90% Fall, 90 to 10% Operating Temperature Range 10 µA -40°C .05 µs .15 µs 1.5 µs 1.5 µs +125°C MICRO SWITCH Sensing and Control VCC = 12 V, RL = 1.6 K Ω, CL = 20 pF SS100 Series ISSUE 2 PK 88830 MAGNETIC CHARACTERISTICS Catalog Listing SS111A SS113A Magnetic Type Bipolar Bipolar Magnetic Characteristics (Gauss) -40°C 0°C 25°C 85°C 125°C Max. Op. Min. Rel. Min. Dif. Max. Op. Min. Rel. Min. Dif. Max. Op. Min. Rel. Min. Dif. Max. Op. Min. Rel. Min. Dif. Max. Op. Min. Rel. Min. Dif. 70 -70 15 65 -65 15 60 -60 15 60 -60 12 65 -65 12 140 -140 20 140 -140 20 140 -140 20 140 -140 20 140 -140 20 SS141A SS143A SS149A SS161A SS166A Unipolar Unipolar Unipolar Latching Latching 135 20 15 117 20 18 115 20 20 120 15 15 123 15 8 215 80 25 190 80 25 180 75 25 180 70 15 190 60 10 440 210 30 400 230 30 110 -110 50 90 -90 50 200 -200 200 185 -185 200 390 235 30 85 -85 50 180 -180 200 400 215 30 410 200 30 85 -85 50 100 -100 50 180 -180 190 180 -180 160 WIRING DIAGRAMS 2 Honeywell • MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945 SS100 Series OPERATE AND RELEASE POINTS SS111A ISSUE 2 PK 88830 SS149A MAX OPERATE MIN OPERATE MAX RELEASE MIN RELEASE SS113A SS161A MAX OPERATE NOM OPERATE MIN OPERATE MAX RELEASE NOM RELEASE MIN RELEASE SS166A SS141A SS143A For application help: call 1-800-537-6945 Honeywell • MICRO SWITCH Sensing and Control 3 SS100 Series ISSUE 2 PK 88830 MOUNTING DIMENSIONS (for reference only) TAPE DIMENSIONS REEL DIMENSIONS MICRO SWITCH Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper PK 88830-2-EN IL50 GLO 997 Printed in USA WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office. Or call: 1-800-537-6945 USA 1-800-737-3360 Canada 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET http://www.sensing.honeywell.com [email protected] Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Helping You Control Your World