4.5x2mm SMD CHIP LED LAMP Part Number: APD2520SYC03 Super Bright Yellow Features Description z4.5x2mm The Super Bright Yellow device is made with InGaAlP zLOW SMT LED,0.5mm THICKNESS POWER CONSUMPTION. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 1000PCS/REEL. zMOISTURE zRoHS (on GaAs substrate) light emitting diode chip. SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1075 REV NO: V.3 DATE: JUN/27/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203001049 Selection Guide Part No. Dice APD2520SYC03 Lens Type Super Bright Yellow (InGaAlP) Viewing Angle [1] Iv (mcd) [2] @ 20mA WATER CLEAR Min. Typ. 2θ1/2 110 450 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 588 nm IF=20mA Spectral Line Half-width Super Bright Yellow 28 nm IF=20mA C Capacitance Super Bright Yellow 25 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1075 REV NO: V.3 DATE: JUN/27/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203001049 Super Bright Yellow APD2520SYC03 SPEC NO: DSAD1075 REV NO: V.3 DATE: JUN/27/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203001049 APD2520SYC03 Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1075 REV NO: V.3 DATE: JUN/27/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203001049 PACKING & LABEL SPECIFICATIONS APD2520SYC03 SPEC NO: DSAD1075 REV NO: V.3 DATE: JUN/27/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203001049