AVAGO ASMT-CB00

ASMT-CB00
InGaN Blue, 0.4mm Low Profile
Right Angle Surface Mount ChipLED
Data Sheet
Description
Features
The ASMT-CB00 of blue color chip-type LEDs is designed
with the smallest footprint to achieve high density of
components on board. They have the industry standard
footprint 1.6 mm x 1.0 mm and a height of only 0.4 mm.
This makes them very suitable for cellular phone and
mobile equipment backlighting and indication application where space is a constraint. In order to facilitate
automated pick and place operation, these ChipLEDs are
shipped in conductive tape and reel, with 4000 units per
reel. These part are compatible with IR soldering.
• Small size right angle mount
• 0603 industry standard footprint
• 0.4 mm low profile type
• Operating temperature range of -30°C to +85 °C
• Compatible with IR reflow soldering process
• Available in 8mm tape on 178mm (7’) diameter reels
• Reel sealed in zip locked moisture barrier bags
Applications
• LCD Backlighting
• Keypad Side / Backlighting
• Pushbutton backlighting
• Symbol Indicator
Package Dimension
1.20
0.047
1.60
0.063
R0.60
0.024
0.20
0.20
0.008
0.008
0.50
0.020
0.40`0.05
0.016`0.002
1.00
0.039
TOP VIEW
SIDE VIEW
0.20
0.009
0.30
0.012
CATHODE MARK
0.30
0.012
0.30
0.012
0.35
0.014
0.35
0.014
TERMINAL VIEW
Notes:
1. All dimensions will be in millimeters (inches)
2. Tolerance is ±0.1mm (±0.004 in) unless otherwise stated
CAUTION: ASMT-CB00 LEDs are Class 1A ESD sensitive per JESD22-A114C.01. Please observe appropriate
precautions during handling and processing. Refer to Application Note AN-1142 for additional details.
Device Selection Guide
Package Dimension (mm)
Parts per Reel
Package Description
1.6 (L) x 1.0 (W) x 0.4 (H)
4000
Untinted, Non-diffused
Parameter
ASMT-CB00
Unit
DC Forward Current [1]
10
mA
Power Dissipation
32
mW
Reverse Voltage (IR = 100μA)
5
V
LED Junction Temperature
95
°C
Operating Temperature Range
-30 to +85
°C
Storage Temperature Range
-40 to +85
°C
Soldering Temperature
See reflow soldering profile (Figure 7 & 8)
Absolute Maximum Ratings at TA = 25°C
Note:
1. Derate linearly as shown in Figure 4.
Electrical Characteristics at TA = 25°C
Forward Voltage
VF (Volts) [1] @ IF = 5mA
Reverse Breakdown
VR (Volts) @ IR = 100μA
Thermal Resistance
RθJ-PIN (°C/W)
Part Number
Typ.
Max.
Min.
Typ.
ASMT-CB00
2.85
3.15
5
450
Notes:
1. Vf tolerance : ±0.1V
Optical Characteristics at TA = 25°C
Luminous Intensity
IV [1] (mcd) @ 5mA
Peak Wavelength
λpeak (nm)
Dominant Wavelength
λd [2] (nm)
Viewing Angle
2 θ1/2 [3] (Degrees)
Part Number
Min.
Typ.
Typ.
Typ.
Typ.
ASMT-CB00
7.2
18
469
473
150
Notes:
1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED
package.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is ½ the peak intensity.
Light Intensity (IV) Bin Limits
Forward Voltage (VF) Bin Limits
Intensity (mcd)
Forward Voltage (V)
Bin ID
Minimum
Maximum
Bin ID
Minimum
Maximum
K
7.20
11.20
1
2.55
2.75
L
11.20
18.00
2
2.75
2.95
M
18.00
28.50
3
2.95
3.15
Tolerance : ±15%
Notes:
1. Bin categories are established for classification of products. Products
may not be available in all categories. Please contact your Avago
representative for information on current available bins.
Tolerance : ±0.1V
Color Bin Limits
Dominant Wavelength (nm)
Bin ID
Minimum
Maximum
A
460.0
465.0
B
465.0
470.0
C
470.0
475.0
D
475.0
480.0
Tolerance : ±1nm
100
1
0.9
FORWARD CURRENT - mA
RELATIVE INTENSITY
0.8
0.7
0.6
0.5
0.4
0.3
0.2
10
1
0.1
0
400
450
500
550
600
WAVELENGTH - nm
Figure 1. Relative intensity vs. wavelength
650
700
0.1
2.0
2.5
3.0
3.5
FORWARD VOLTAGE - V
Figure 2. Forward current vs. forward voltage
4.0
2.0
12
1.4
1.2
1.0
0.8
0.6
0.4
10
(NORMALIZED AT 5 mA)
1.6
RELATIVE LUMINOUS INTENSITY
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 5 mA)
1.8
8
6
4
2
0.2
0
0
2
4
6
8
DC FORWARD CURRENT - mA
0
10
Figure 3. Luminous intensity vs. forward current
0
20
40
60
100
Figure 4. Maximum forward current vs. ambient temperature
100
0.4 (0.016)
90
RELATIVE INTENSITY
80
DC FORWARD CURRENT - mA
0.4 (0.016)
80
70
0.7 (0.028)
60
0.15 (0.006)
50
40
0.8
(0.031)
30
20
10
0
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90
1.2
(0.047)
0.8
(0.031)
CENTERING
BOARD
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1mm (±0.004in.) unless otherwise specified
ANGLE
Figure 5. Radiation pattern
Figure 6. Recommended soldering land pattern
10 to 30 SEC.
230°C MAX.
4°C/SEC. MAX.
140-160°C
3°C/SEC. MAX.
4°C/SEC.
MAX.
217 °C
200 °C
255 - 260°C
3°C/SEC. MAX.
6°C/SEC. MAX.
150 °C
3°C/SEC. MAX.
100 SEC. MAX.
60 - 120 SEC.
OVER 2 MIN.
TIME
Figure 7. Recommended reflow soldering profile
TEMPERATURE
TEMPERATURE
10 SEC. MAX.
TIME
Figure 8. Recommended Pb-free reflow soldering profile
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 9. Reeling orientation
8.0 ± 1.0 (0.315 ± 0.039)
10.50 ± 1.0 (0.413 ± 0.039)
∅13.1 ± 0.5
(∅0.516 ± 0.020)
∅20.20 MIN.
( ∅0.795 MIN.)
3.0 ± 0.5
(0.118 ± 0.020)
Æ
59.60 ± 1.00
(2.346 ± 0.039)
178.40 ± 1.00
(7.024 ± 0.039)
4.0 ± 0.5
(0.157 ± 0.020)
6
PS
5.0 ± 0.5
(0.197 ± 0.020)
Figure 10. Reel dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1mm (±0.004in.) unless otherwise specified.
4.00 ± 0.10
1.50
0.059
0.157 ± 0.004
DIM. C
SEE TABLE 1
1.75
0.069
0.20 ± 0.02
0.008 ± 0.001
8.00 ± 0.30
0.315 ± 0.012
DIM. A
SEE TABLE 1
DIM. B
R 0.40
[ SEE TABLE 1 ]
USER FEED
DIRECTION
CARRIER TAPE
2.00 ± 0.05
0.079 ± 0.002
COVER TAPE
4.00
0.157
Table1.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1mm (±0.004in.) unless otherwise specified.
PART NUMBER
DIM.A ± 0.10 (0.004)
DIM.B ± 0.10 (0.004)
DIM.C ± 0.10 (0.004)
ASMT-CA00
1.75 (0.069)
1.10 (0.043)
0.60 (0.024)
Dimensions In Millimeters (Inches)
Figure 11. Tape dimensions
END
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
START
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
Figure 12. Tape leader and trailer dimensions
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
Reflow Soldering
For more information on reflow soldering, refer to Application Note AN-1060, Surface Mounting SMT LED Indicator
Components.
Storage Condition
5 to 30°C @ 60%RH max.Baking is required before mounting, if
1. Humidity Indicator Card is > 10% when read at 23 ± 5°C.
2. Device expose to factory conditions <30°C/60%RH more than 672 hours.
Recommended baking condition: 60±5°C for 20 hours.
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved.
AV02-0587EN - July 28, 2007