Agilent HSMF-C165, C166, C167 Miniature Bi-Color Surface Mount Chip LEDs Data Sheet Description The HSMF-C16x series of bicolor chip-type LEDs is designed in an ultra small package for miniaturization. It is the first of its kind to achieve such small packaging for 2 dies. The small size, narrow footprint, and low profile make this series of LEDs excellent for backlighting, status indication, and front panel illumination applications. Features • Small 1.6 x 0.8 mm footprint • Diffused optics • Operating temperature range of –30°C to +85°C • Compatible with reflow soldering • Three color combinations available: red/green, yellow/ green, orange/green • Available in 8 mm tape on 7" (178 mm) diameter reels Applications • Keypad backlighting • Symbol backlighting • LCD backlighting • Status indication • Front panel indicator Device Selection Guide Part Number Color Parts per Reel HSMF-C165 High Efficiency Red/Green 4000 HSMF-C166 Yellow/Green 4000 HSMF-C167 Orange/Green 4000 Package Dimensions CATHODE LINE LED DIES 1 3 0.8 (0.031) 2 4 1.6 (0.063) GREEN 3 1 RED/YELLOW/ORANGE 2 4 DIFFUSED EPOXY POLARITY 0.5 (0.020) PC BOARD 0.16 (0.006) CATHODE LINE 0.4 (0.016) 0.4 (0.016) 0.3 (0.012) SOLDERING TERMINALS NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED. 2 Absolute Maximum Ratings at TA = 25˚C Parameter HSMF-C165/166/167 Units DC Forward Current [1] 20 mA Peak Pulsing Current[2] 100 mA Power Dissipation 52 mW Reverse Voltage (IR = 100 µA) 5 V LED Junction Temperature 95 ˚C Operating Temperature Range –30 to +85 ˚C Storage Temperature Range –40 to +85 ˚C Soldering Temperature See reflow soldering profile (Figure 6) Notes: 1. Derate linearly as shown in Figure 4. 2. Pulse condition of 1/10 duty and 0.1 ms width. Electrical Characteristics at TA = 25˚C Color Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. Reverse Breakdown VR (Volts) @ IR = 100 µA Min. Capacitance C (pF), @ VF = 0, f = 1 MHz Typ. Thermal Resistance RθJ–PIN (˚C/W) Typ. HER 2.1 2.6 5 5 325 Orange 2.2 2.6 5 7 325 Yellow 2.1 2.6 5 6 325 Green 2.2 2.6 5 9 325 Optical Characteristics at TA = 25˚C Color Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. Peak Wavelength λpeak (nm) Typ. Color, Dominant Wavelength λd[2] (nm) Typ. Viewing Angle 2 θ1/2 Degrees [3] Typ. HER 2.5 10.0 630 626 120 Orange 2.5 8.0 605 604 120 Yellow 2.5 8.0 589 586 120 Green 4.0 15.0 570 572 120 Notes: 1. The luminous intensity, I V, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, λd , is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3 Color Bin Limits Green Color Bins[1] Bin ID A B C D E Dom. Wavelength (nm) Min. Max. 561 565 564 568 567 571 570 574 573 577 Orange Color Bins [1] Bin ID A B C D E F Dom. Wavelength (nm) Min. Max. 596.0 601.0 599.0 604.0 602.0 607.0 605.0 610.0 608.0 613.0 611.0 616.0 Yellow/Amber Color Bins[1] Dom. Wavelength (nm) Bin ID Min. Max. A 581.5 585.0 B 584.0 587.5 C 586.5 590.0 D 589.5 592.5 E 591.5 595.0 F 594.0 597.5 Light Intensity (Iv) Bin Limits[1] Intensity (mcd) Bin ID Min. Max. A 0.10 0.20 B 0.16 0.32 C 0.25 0.50 D 0.40 0.80 E 0.63 1.25 F 1.00 2.00 G 1.60 3.20 H 2.50 5.00 J 4.00 8.00 Bin ID K L M N P Q R S T Intensity (mcd) Min. Max. 6.30 12.50 10.00 20.00 16.00 32.00 25.00 50.00 40.00 80.00 63.00 125.00 100.00 200.00 160.00 320.00 250.00 500.00 Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. 4 1.0 IF – FORWARD CURRENT – mA 100 RELATIVE INTENSITY GREEN YELLOW 0.5 ORANGE 0 500 HER 550 600 650 700 IF MAX – MAXIMUM FORWARD CURRENT – mA LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 1.2 1.0 0.8 0.6 0.4 0.2 10 15 20 25 30 IF – FORWARD CURRENT – mA Figure 3. Luminous intensity vs. forward current. 25 20 Rθ J-A= 600˚C/W 15 Rθ J-A= 800˚C/W 10 5 0 0 20 40 60 100 RELATIVE INTENSITY – % 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 ANGLE Figure 5. Relative intensity vs. angle. 5 80 100 TA – AMBIENT TEMPERATURE – °C Figure 4. Maximum forward current vs. ambient temperature. 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 1 GREEN 2 2.1 2.2 2.3 Figure 2. Forward current vs. forward voltage. 1.4 5 YELLOW VF – FORWARD VOLTAGE – V Figure 1. Relative intensity vs. wavelength. 0 ORANGE 0 1.5 1.6 1.7 1.8 1.9 750 WAVELENGTH - nm 0 HER 10 0.60 (0.024) TEMPERATURE 10 SEC. MAX. 0.40 (0.016) 230°C MAX. 0.30 (0.012) 4°C/SEC. MAX. 140-160°C 0.40 (0.016) –3°C/SEC. MAX. 4°C/SEC. MAX. OVER 2 MIN. 0.70 (0.028) TIME Figure 6. Recommended reflow soldering profile. 0.70 (0.028) Figure 7. Recommended soldering pad pattern. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 8. Reeling orientation. 8.0 ± 1.0 (0.315 ± 0.039) 10.50 ± 1.0 (0.413 ± 0.039) Ø 20.20 MIN. (Ø 0.795 MIN.) Ø 13.1 ± 0.5 (Ø 0.516 ± 0.020) 3.0 ± 0.5 (0.118 ± 0.020) 59.60 ± 1.00 (2.346 ± 0.039) 178.40 ± 1.00 (7.024 ± 0.039) 4.0 ± 0.5 (0.157 ± 0.020) 6 PS Figure 9. Reel dimensions. NOTE: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 6 5.0 ± 0.5 (0.197 ± 0.020) 4.00 (0.157) DIM. C (SEE TABLE 1) CATHODE 1.50 (0.059) 0.20 ± 0.05 (0.008 ± 0.002) 1.75 (0.069) 3.50 ± 0.05 (0.138 ± 0.002) DIM. A (SEE TABLE 1) 8.00 ± 0.30 (0.315 ± 0.012) DIM. B (SEE TABLE 1) 2.00 ± 0.05 (0.079 ± 0.002) CARRIER TAPE USER FEED DIRECTION COVER TAPE 4.00 (0.157) TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PART NUMBER HSMF-C16x SERIES DIM. A DIM. B DIM. C ± 0.10 (± 0.004) ± 0.10 (± 0.004) ± 0.10 (± 0.004) 1.80 (0.071) 0.95 (0.037) 0.60 (0.024) Figure 10. Tape dimensions. END THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. START MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. Figure 11. Tape leader and trailer dimensions. NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED. 7 MINIMUM OF 230 mm (9.05 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Reflow Soldering For more information on reflow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components. Storage Condition: 5 to 30°C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been open for more than 1 week Baking recommended condition: 60 ± 5°C for 20 hours. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright © 2002 Agilent Technologies, Inc. Obsoletes 5988-4258EN April 6, 2002 5988-6146EN