AWT6102M2 EGSM/DCS/PCS Triple Band Power Amplifier Module Advanced Product Information Rev. 2 FEATURES • • • • • • • • • • InGaP HBT Technology High Efficiency 55% GSM High Efficiency 50% DCS High Efficiency 45% PCS Low Leakage Current ( <10µA) SMT Module Package Small Foot Print (9.2mm X 11.6mm) Low Profile (1.55 mm) 50 Ω Input and Output Matching Minimum Number of External Components APPLICATIONS • • • 9x11.6 mm MCM Module Package GSM/DCS Dual Band Handsets GSM/PCS Dual Band Handsets GSM/DCS/PCS Triple Band Handsets Description The AWT6102 is a 3.5V power amplifier module for use in dual Mode GSM/DCS/PCS wireless handsets and communication systems. Absolute Minimum and Maximum Ratings SIGNAL MIN MAX UNITS Supply Voltage (Vcc ) +7 V Input Power (RF IN) +15 dBm + 4.3V V Control Voltage (V APC ) Storage Temperature (TSTG ) -55 150 °C Operating Temperature (TC) -25 85 °C AWT6102M2 Electrical Specifications EGSM: (Unless otherwise specified: Vcc = 3.2V, Z = Z =50Ω System, TC = 25 °C, pulsed operation with IN OUT 577µsec pulse width and 12.5% duty cycle) PARAMETER SYMBOL MIN TYP MAX UNITS fo 880 - 915 MHz Supply Voltage VCC 2.9 3.2 4.5 V Control Voltage Range VAPC 0.2 2.0 2.7 V Power Control Current IA P C 1 mA Input Power P IN 10 12 dBm Output Power POUT 34.5 - dBm Power Added Efficiency PAE 55 - % Frequency 8 50 Degraded Output Power VC C =2.9 V, VAPC = 2.4V, PIN = 8dBm, TC= 85 °C 32 Isolation VA P C = 0.2V, PIN = 10 dBm -25 -35 - -12 -15 -7 -7 -7 dBm dBm dBm - -70 dBc Harmonics (1) 2 nd 3 rd 3fo to 12.750 GHz Stability: Load 8:1 VSWR All phase angles - - dBm Ruggedness: PIN = 12 dBm, VS U P=4.5V, VAPC= 0.2 - 2.8V Leakage Current VA P C=0V, VC C = 4.5V No input power 10:1 VSWR All Phases - 10 Noise Power 925 to 935 MHz 935 to 960 MHz Switching Time VA P C on to 90% detected POUT Input VSWR Output VSWR 2 dBm - - - µA -72 -84 dBm/100 KHz dBm/100 KHz 2 µsec 2:1 2:1 AWT6102M2 Electrical Specifications DCS/PCS: (Unless otherwise specified: Vcc = 3.2V, Z = Z =50Ω System, TC = 25 °C, pulsed operation with IN OUT 577µsec pulse width and 12.5% duty cycle) PARAMETER SYMBOL MIN TYP MAX UNITS Frequency DCS fo 1710 - 1785 MHz Frequency PCS fo 1850 - 1910 MHz Supply Voltage VC C 2.9 3.2 4.5 V Control Voltage Range VA P C 0.2 2.0 2.7 V Power Control Current IAPC 1 mA Input Power PIN 8 10 dBm 6 Output Power DCS POUT 31.5 - dBm Output Power PCS POUT TBD - dBm Power Added Efficiency (DCS) PAE 45 50 - % Power Added Efficiency (PCS) PAE TBD TBD - % Degraded Output Power (DCS/PCS) VC C =2.9 V, V APC = 2.4V, PIN = 6dBm, TC = 85 °C 29.5 Isolation VA P C = 0.2V, PIN = 10 dBm -30 -35 - -12 -15 -7 -7 -7 dBm dBm dBm - -70 dBc Harmonics ( 1 ) 2 nd 3 rd 3fo to 12.750 GHz Stability: Load 8:1 VSWR All phase angles - - dBm Ruggedness: P IN = 10 dBm, VS U P=4.5V, V APC = 0.2 - 2.8V Leakage Current VA P C=0V, VC C = 4.5V No input power dBm 10:1 VSWR All Phases - 10 Noise Power 20 MHz offset Switching Time VA P C on to 90% detected P OUT - µA -76 dBm/100 KHz 2 µ sec Input VSWR - - 2:1 Output VSWR - - 2:1 3 AWT6102M2 Schematic 1 33 pF / PCS / PCS 68 pF A Pin Name Description Pin Name Description 1 GND Ground 9 GND Ground 2 DCS/PCS DCS/PCS RF Input Signal 10 EGSM P OUT GSM RF output 3 GND Ground 11 GND Ground 4 EGSM PIN GSM RF Input Signal 12 DCS/PCS DCS/PCS RF output 5 GND Ground 13 GND Ground 6 VCC A Supply Voltage 14 VAPC Power Control 7 GND Ground 15 GND Ground 8 VCC B Supply Voltage 16 VBAND (1) Band Select Notes: 1. Vband: 4 B EGSM 0.0 to 0.5V DCS/PCS: 2.0 to 2.8V AWT6102M2 Package Outline Drawing Bottom View 5 AWT6102M2 NOTES 6 AWT6102M2 NOTES 7 AWT6102M2 ANADIGICS, Inc. 35 Technology Drive Warren, New Jersey 07059 Tel: (908) 668-5000 Fax: (908) 668-5132 http://www.anadigics.com [email protected] IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The Advanced Product data sheets and product specifications contained in this data sheet are subject to change prior to a products formal introduction. The information in this data sheet has been carefully checked and is assumed to be reliable. However, ANADIGICS assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 8