Oscilent Corporation IF SAW Filter | 820-IF63.0M-B Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 820-IF63.0M-B 20.2 x 12.6 Thru Hole Base Station & Repeater Jan. 01, 2007 . TYPE : 63.0 MHz Bandpass Filter 400 kHz Bandwidth PART NUMBER : 820-IF63.0M-B . FREQUENCY CHARACTERISTICS Horizontal : 500 kHz/Div Veritical : 10 dB/Div Horizontal : 100 kHz/Div Veritical : 1 dB/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency (Fo) - 63.0 - MHz Insertion Loss at Fo - 14.2 15.0 dB 3dB Bandwidth Fo +/-200 Fo +/-225 - kHz 55dB Bandwidth - Fo +/-750 Fo +/-800 kHz Passband Ripple at Fo +/-100kHz - 1.0 2.0 dB Spurious Attenuation 55 57 - dB Operating Temperature Range -55 - +85 °C Ultimate Attenuation 60 65 - dB - Quartz - - -55 - +85 °C Substrate Material Storage Temperature Range * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 820-IF63.0M-B Page 2 of 2 L1 = 270nH L2 = 270nH PKG Ground for best Spurious Levels Source/Load Impedance = 50 ohms Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 820-IF63.0M-B