LSK389 - Linear Systems

LSK389
ULTRA LOW NOISE
MONOLITHIC DUAL
N-CHANNEL JFET AMPLIFIER
FEATURES
ULTRA LOW NOISE
en = 0.9nV/√Hz (typ)
TIGHT MATCHING
IVGS1-2I = 20mV max
HIGH BREAKDOWN VOLTAGE
BVGSS = 40V max
HIGH GAIN
Gfs = 20mS (typ)
LOW CAPACITANCE
25pF typ
IMPROVED SECOND SOURCE REPLACEMENT FOR 2SK389
ABSOLUTE MAXIMUM RATINGS1
@ 25 °C (unless otherwise stated)
Maximum Temperatures
Storage Temperature
-65 to +150°C
Junction Operating Temperature
-55 to +135°C
Maximum Power Dissipation
Continuous Power Dissipation @ +25°C
SOIC-A
Top View
TO-71
Top View
400mW
Maximum Currents
Gate Forward Current
IG(F) = 10mA
Maximum Voltages
Gate to Source
VGSS = 40V
Gate to Drain
VGDS = 40V
* For equivalent single version, see LSK170 family
MATCHING CHARACTERISTICS @ 25°C (unless otherwise stated)
SYMBOL
CHARACTERISTIC
VGS1  VGS2
Differential Gate to Source Cutoff
Voltage
IDSS1
IDSS2
MIN
Gate to Source Saturation Current Ratio
TYP
MAX
UNITS
20
mV
VDS = 10V, ID = 1mA
---
VDS = 10V, VGS = 0V
0.9
CONDITIONS
ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise stated)
SYMBOL
BVGSS
VGS(OFF)
IDSS
CHARACTERISTIC
MIN
Gate to Source Breakdown Voltage
-40
Gate to Source Pinch-off Voltage
Drain to Source Saturation
Current
TYP
MAX
-0.15
-2
LSK389A
2.6
6.5
LSK389B
6
12
LSK389C
10
20
LSK389D
17
30
UNITS
CONDITIONS
V
VDS = 0, ID = -100µA
V
VDS = 10V, ID = 0.1µA
mA
VDS = 10V, VGS = 0
IGSS
Gate to Source Leakage Current
-200
pA
VGS = -30V, VDS = 0
IG1G2
Gate to Gate Isolation Current
±1.0
µA
VG1-G2 = ±45V, ID = IS = 0A
Note: All MIN/TYP/MAX limits are absolute numbers. Negative signs indicate electrical polarity only.
Linear Integrated Systems
• 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261
Doc 201122
5/02/2014 Rev#A7 ECN# LSK389
ELECTRICAL CHARACTERISTICS CONT. @ 25°C (unless otherwise stated)
SYMBOL
CHARACTERISTIC
MIN
TYP
8
20
MAX
UNITS
Gfs
Full Conduction Transconductance
mS
en
Noise Voltage
0.9
1.9
Nv/√Hz
en
Noise Voltage
2.5
4
Nv/√Hz
CONDITIONS
VDS = 10V, VGS = 0, f = 1kHz
CISS
Common Source Input Capacitance
25
pF
VDS = 10V, ID = 2mA, f = 1kHz,
NBW = 1Hz
VDS = 10V, ID = 2mA, f = 10Hz,
NBW = 1Hz
VDS = 10V, VGS = 0, f = 1MHz,
CRSS
Common Source Reverse Transfer Cap.
5.5
pF
VDG = 10V, ID = 0, f = 1MHz,
ORDERING INFORMATION
LSK389 - A - SOIC-8
IDSS Range
A
B
C
D
2.6 - 6.5 mA
6 - 12 mA
10 - 20 mA
17 - 30 mA
Package
TO-71 6L
SOIC-A 8L
TO-71
SOIC-8
PACKAGE DIMENSIONS
TO-71
SOIC-A
0.210
0.170
Note: All Dimensions in inches
NOTES:
1. Absolute maximum ratings are limiting values above which serviceability may be impaired.
Information furnished by Linear Integrated Systems is believed to be accurate and reliable. However, no responsibility is assumed for its use;
nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Linear Integrated Systems.
Linear Integrated Systems (LIS) is a 25-year-old, third-generation precision semiconductor company providing high-quality
discrete components. Expertise brought to LIS is based on processes and products developed at Amelco, Union Carbide, Intersil
and Micro Power Systems by company President John H. Hall. Hall, a protégé of Silicon Valley legend Dr. Jean Hoerni, was the
director of IC Development at Union Carbide, Co-Founder and Vice President of R&D at Intersil, and Founder/President of Micro
Power Systems.
Linear Integrated Systems
• 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261
Doc 201122
5/02/2014 Rev#A7 ECN# LSK389