CP20TD1-12A Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 20 Amperes/600 Volts � �������� ���� ��� ��� ���������� ��� ��� ��� �� ��� � ��� ��� � � ��� ��� ��� ��� ��� ��� ��� ��� � ������� ������ �������� � � ����� ����� ����� ����� � ������ � ������� ���������� ������ ������������� ������� ������ ������� ������ ����� � ����� ���������� ����� � � � � � � � � � �� �� �� � � �� ���������� ���������� �� ������������ � ������� � � �� �� �� �� � �� �� �� �� �� �� �� �� �� � � � � � ������������� ���������� ����� ������� � � � � �� � � � � ���������� � � ���������� ��������� ���������� ��������������� �� � ��������� ������������ ��������� ��������� ��������� ��������� ���������� �� � �� �� � � � �� ��� ��� ��� � ��� ��� ��� �� ��� ��� ��� ���� �� � �� � �� ���������� �� � ��� ��� Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M N P Q R 04/06 Inches 2.68 1.73 0.58±0.02 3.1 2.83 0.16±0.01 2.83±0.01 0.08±0.01 0.2±0.008 0.87 0.96±0.01 0.94±0.02 1.14 0.098 0.22±0.02 0.18 Millimeters 68.0 44.0 14.7±0.5 79.0 72.0 4.0±0.3 72.0±0.3 2.0±0.3 5.0±0.2 22.0 24.3±0.3 23.9±0.5 29.0 2.5 5.7±0.5 4.5 Dimensions S T U V W X Y Z AA AB AC AD AE AF AG Inches 0.04±0.008 0-5° 0 Min. 8° 0.04 0.02 Max. 0.06 0.023±0.008 0.08 Dia. 0.1 Dia. 0.03 Deep 0.057 0.023 0.04 0.02±0.008 Millimeters 1.0±0.2 0-5° 0 Min. 8° 1.1 0.5 Max. 1.6 0.6±0.2 2.0 Dia. 2.5 Dia. 0.8 Deep 1.45 0.6 1.1 0.5±0.2 Description: DIP-CIBs are low profile, thermally efficient, transfer mold modules. Each module consists of a threephase diode converter section, a three-phase inverter section and a brake circuit. Open emitters allow the designer to sense the current in each phase leg for accurate and low cost current sensing. A thermistor is included in the package for sensing the baseplate temperature. 5th Generation CSTBT chips yield low loss. The module is completely Pb-Free and hence RoHS compliant. Features: £ Compact Package £ Only 5.7mm Thick £ One Package for Entire Family £ Thermistor £ Open Emitters Applications: £ AC Motor Control £ Servo Motors £ Robotics £ HVAC Inverters Ordering Information: CP20TD1-12A is a 600 Volt, 20 Ampere DIP-CIB low profile, thermally efficient, transfer mold module. 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 CP20TD1-12A DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 20 Amperes/600 Volts Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings Symbol CP20TD1-12A Units Junction Temperature* Tj -20 to 150 °C Tstg -40 to 125 °C Mounting Torque, M4 Mounting Screws — 13 in-lb Module Weight Typical — 52 Grams VISO 2500 Volts Storage Temperature Isolation Voltage (60Hz, Sinusoidal, AC 1 Min., Applied Between Pins and Heatsink) Inverter Part Collector-Emitter Voltage (G-E Short) VCES 600 Volts Gate-Emitter Voltage (C-E Short) VGES ±20 Volts Collector Current** (DC, TC = 78°C) Peak Collector Current*** (Pulse) Maximum Collector Dissipation (TC = 25°C) IC 20 Amperes ICM 40 Amperes PC 96 Watts IE**** 20 Amperes IEM**** 40 Amperes Collector-Emitter Voltage (G-E Short) VCES 600 Volts Gate-Emitter Voltage (C-E Short) VGES ±20 Volts IC 10 Amperes Peak Collector Current** (Pulse) ICM 20 Amperes Maximum Collector Dissipation (TC = 25°C, Tj < 150°C) PC 70 Watts VRRM 600 Volts IFM 10 Amperes Repetitive Peak Reverse Voltage VRRM 800 Volts Recommended AC Input Voltage) Ea 220 Volts DC Output Current (Three-phase Rectifying Circuit) IO 20 Amperes IFSM I 2t 245 Amperes A2s Emitter Current* (DC, TC = 56°C) Peak Emitter Current** (Pulse) Brake Part Collector Current* (DC, TC = 110°C) Repetitive Peak Reverse Voltage (Clamp Diode Part) Forward Current (Clamp Diode Part, Tj < 150°C) Converter Part Surge Forward Current (1/2 Cycle at 60 Hz, Peak Value, Non-repetitive) I2t for Fusing (Value for 1 Cycle of Surge Current) 252 *It is recommended to limit the average junction temperature below 125°C to ensure safe operation. **TC is measured just underneath the power chip. ***Pulse width and repetition rate should be such that the device junction temperature (Tj) does not exceed Tj(max.) rating. ****IE, VEC, trr, and Qrr represent characteristics of the anti-paralleled emitter-to-collector free-wheel diode (FWDi). 2 04/06 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 CP20TD1-12A DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 20 Amperes/600 Volts Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units ICES VCE = VCES, VGE = 0V — — 1.0 mA VGE(th) IC = 2.0mA, VCE = 10V 5.0 6.0 7.0 Volts IGES VGE = 20V, VCE = 0V — — 1.0 µA Inverter Part Collector-Cutoff Current Gate-Emitter Threshold Voltage Gate-Emitter Cutoff Current Collector-Emitter VCE(sat) Saturation Voltage* IC = 20A, VGE = 15V, Tj = 25°C — 1.8 2.5 Volts IC = 20A, VGE = 15V, Tj = 125°C — 1.9 — Volts — 1.57 — nF VCE = 10V, VGE = 0V, f = 1MHz — 0.24 — nF — 0.06 — nF VCC = 300V, IC = 20A, VGE = 15V — 65 — nC — 80 — ns — 50 — ns Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Total Gate Charge QG Turn-on Delay Time td(on) Turn-on Rise Time tr VCC = 300V, IC = 20A, Turn-off Delay Time td(off) VGE = ±15V, RG = 33Ω, — 200 — ns tf Tj = 25°C, — 400 — ns Reverse Recovery Time** trr Inductive Load — — — ns Reverse Recovery Charge** Qrr — — — µC Turn-off Fall Time Emitter-Collector Voltage** VEC IE = 20A, VGE = 0V — 1.7 2.4 Volts External Gate Resistance Rg — 33 — 330 Ω ICES VCE = VCES, VGE = 0V — — 1.0 mA VGE(th) IC = 1.0mA, VCE = 10V 5.0 6.0 7.0 Volts IGES VGE = 20V, VCE = 0V — — 1.0 µA VCE(sat) IC = 10A, VGE = 15V, Tj = 25°C — 1.8 2.5 Volts Brake Part Collector-Cutoff Current Gate-Emitter Threshold Voltage Gate-Emitter Cutoff Current Collector-Emitter Saturation Voltage* IC = 10A, VGE = 15V, Tj = 125°C Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Total Gate Charge QG Turn-on Delay Time td(on) VCE = 10V, VGE = 0V, f = 1MHz VCC = 300V, IC = 10A, VGE = 15V — 1.9 — Volts — 0.8 — nF — 1.3 — nF — 0.03 — nF — 33 — nC — 80 — ns Turn-on Rise Time tr VCC = 300V, IC = 10A, — 50 — ns Turn-off Delay Time td(off) VGE = ±15V, RG = 62Ω, — 200 — ns Turn-off Fall Time tf Tj = 25°C, — 400 — ns Reverse Recovery Time trr Inductive Load — — — ns Reverse Recovery Charge Forward Voltage Drop External Gate Resistance — — — µC VFM Qrr IF = 10A, Clamp Diode Part — 1.7 2.4 Volts Rg — 62 — 620 Ω *Pulse width and repetition rate should be such as to cause negligible temperature rise. **TC is measured just underneath the power chip. 04/06 3 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 CP20TD1-12A DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 20 Amperes/600 Volts Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Repetitive Reverse Current IRRM VR = VRRM, Tj = 125°C — — 1.0 mA Forward Voltage Drop VFM IF = 20A — — 1.4 Volts Converter Part Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Rth(c-f) Case-to-Fin, Thermal Grease Applied — 0.047 — °C/W Thermal Resistance, Junction to Case Rth(j-c)Q IGBT Part, Per 1/6 Module — — 1.3 °C/W Thermal Resistance, Junction to Case Rth(j-c)D FWDi Part, Per 1/6 Module — — 1.7 °C/W Thermal Resistance, Junction to Case Rth(j-c)Q IGBT Part — — 1.6 °C/W Thermal Resistance, Junction to Case Rth(j-c)D FWDi Part — — 2.1 °C/W Rth(j-c) Per 1/6 Module — — 1.3 °C/W Resistance Rth TC = 25°C 9.5 10.0 10.5 kΩ B Constant* B(25/100) Resistance at 25°C, 100°C — 3450 — K Common Rating Contact Thermal Resistance Inverter Part Brake Part Converter Part Thermal Resistance, Junction to Case NTC Thermistor Part *Thermistor resistance RX at arbitrary temperature TX(K) can be calculated with the B constant formula [ RX = R25 • exp B(25/100) • ( 1 TX – ] 1 ) T25 where R25 is the resistance at TC = 25°C, T25 = 298K. 4 04/06 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 CP20TD1-12A DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 20 Amperes/600 Volts COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (INVERTER PART - TYPICAL) 40 15 13.5 VGE = 19V 30 25 20 11 15 10 5 0 0 1 2 3 30 25 20 15 10 5 0 4 0 SWITCHING LOSS VS. COLLECTOR CURRENT (INVERTER PART - TYPICAL) SWITCHING LOSS, Eon, Eoff, Err, (mJ/PULSE) 2 Eoff 1 Err 0 20 18 5 10 15 20 25 30 35 12 04/06 20 15 10 5 0 0.5 0 1 Err 0 0 8 6 4 2 10 20 30 40 50 60 70 80 90 50 100 150 200 250 300 350 7 6 5 4 3 2 1 75 100 TEMPERATURE, TC, (°C) 3.0 101 100 Single Pulse TC = 25°C IGBT FWDi 10-2 10-3 10-2 10-1 100 101 DIODE FORWARD VOLTAGE CHARACTERISTICS (CONVERTER PART - TYPICAL) 8 50 2.5 2.0 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (INVERTER PART - IGBT & FWDi) 40 25 1.5 TIME, (s) 10 9 0 1.0 10-1 Eoff NTC THERMISTOR TEMPERATURE CHARACTERISTICS (TYPICAL) GATE CHARGET, QG, (nc) 25 EMITTER-COLLECTOR SATURATION VOLTAGE, VEC, (VOLTS) 2 GATE CHARGE (INVERTER PART - TYPICAL) VCC = 300V 0 30 3.0 Eon GATE RESISTANCE, RG, (Ω) 10 0 2.5 2.0 COLLECTOR CURRENT, IC, (AMPERES) VCC = 200V 14 VCC = 300V VGE = ±15V IC = 20A Tj = 125°C Inductive Load 3 40 IC = 20A 16 1.5 DIODE FORWARD CURRENT, IF, (AMPERES) 0 GATE-EMITTER VOLTAGE, VGE, (VOLTS) Eon NTC THERMISTOR RESISTANCE, Rth, (kΩ) SWITCHING LOSS, Eon, Eoff, Err, (mJ/PULSE) 3 1.0 SWITCHING LOSS VS. GATE RESISTANCE (INVERTER PART - TYPICAL) 4 VCC = 300V VGE = ±15V RG = 33Ω Tj = 125°C Inductive Load 0.5 VGE =T15V j = 25°C 25°C Tj = 125°C Tj = 125°C 35 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 4 40 VGE = 15V Tj = 25°C Tj = 125°C 35 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth • (NORMALIZED VALUE) 16.5 COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) 40 Tj = 125°C 35 EMITTER-COLLECTOR SATURATION VOLTAGE CHARACTERISTICS (INVERTER PART - TYPICAL) COLLECTOR-CURRENT, -IC, (AMPERES) OUTPUT CHARACTERISTICS (INVERTER PART - TYPICAL) 125 VGE = 15V Tj = 25°C Tj = 125°C 35 30 25 20 15 10 5 0 0 0.5 1.0 1.5 2.0 DIODE FORWARD VOLTAGE, VF, (VOLTS) 5 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 CP20TD1-12A DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 20 Amperes/600 Volts COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (BRAKE PART - TYPICAL) 20 VGE = 15V Tj = 25°C Tj = 125°C 15 COLLECTOR-CURRENT, -IC, (AMPERES) COLLECTOR-CURRENT, IC, (AMPERES) 20 10 5 0 0 0.5 1.0 1.5 2.0 2.5 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 6 COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (BRAKE PART - TYPICAL) 3.0 VGE = 15V Tj = 25°C Tj = 125°C 15 10 5 0 0 0.5 1.0 1.5 2.0 2.5 3.0 EMITTER-COLLECTOR SATURATION VOLTAGE, VEC, (VOLTS) 04/06