WILLAS FM120-M+ THRU 1N4148 300mA SMALL SIGNAL SWITCHING DIODE - 75V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V DO-35 PACKAGE SOD-123+ PACKAGE FM1200-M+ Pb Free Product Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to 1N4148 SIGNAL DIODE optimize board space. • Low power loss, high efficiency. capability, low forward voltage • High current Absolute Maximum Ratings (Ta=25 °C) drop. • High surge capability. Items Symbol Ratings Unit • Guardring for overvoltage protection. Reverse Voltage VR 75 V • Ultra high-speed switching. Reverse Recovery trr 4 ns • Silicon epitaxial planar chip, metal silicon junction. Time • Lead-free parts meet environmental standards of MIL-STD-19500 Power Dissipation/228 P 500 mW for packing code suffix "G" • RoHS product 3.33mW/ C (25 C) ° ° Halogen free product for packing code suffix "H" Forward Current IF 300 mA Mechanical data Junction Temp. Tj -55 to 150 °C flame retardant • Epoxy : UL94-V0 ratedTstg -55 to 150 °C Operating/Storage • Case : Molded plastic, SOD-123H , • Terminals :Plated Mechanical Data terminals, solderable per MIL-STD-750 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. Dimensions (DO-35) .022(0.55) .018(0.45) 0.071(1.8) 0.056(1.4) 1.02(26.0) MIN. .153(3.6) .132(3.0) 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. .087(2.2) 0.031(0.8) Typ. .067(1.7) Method 2026 Items Materials Package DO-35 by cathode band • Polarity : Indicated Case Hermetically : Any sealed glass • Mounting Position Lead/Finish Double stud/Solder Plating • Weight : Approximated 0.011 gram Chip Glass Passivated 1.02(26.0) MIN. Dimensions in inches and (millimeters) Dimensions in millimeters Moisture Sensitivity Level 1 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half Characteristics wave, 60Hz, resistive of inductive Electrical (Ta=25 °C) load. For capacitive Ratingsload, derate current by 20% Polarity: Color band denotes cathode end Symbol Ratings Unit Minimum Breakdown BV FM150-MH FM160-MH FM180-MH FM1100-MH V FM1150-MH FM1200-MH UNIT SYMBOL FM120-MH FM130-MH FM140-MH RATINGS Voltage IR= 5.0uA 75 18 Marking Code 12 13 14 15 16 10 115 120 100uA 20 30 40 50 60 100 80 100 150 200 MaximumIR= Recurrent Peak Reverse Voltage Volts VRRM Peak IFsurge A 105 Volts 14 21 28 35 42 1.0 56 70 140 Maximum RMSForward Voltage Surge Current PW= 1sec. VRMS Maximum Forward V 150 Volts Maximum DC Blocking Voltage Voltage 20 30 40 VF 50 60 80 100 200 VDC IF= 10mA 1.0 Amp Maximum Average Forward Rectified Current IO 1.0 Maximum Reverse Current IR uA Peak Forward VR=Surge 20VCurrent 8.3 ms single half sine-wave IFSM 0.025 30 Amp superimposed rated load (JEDEC method) VR=on75V 5.0 ℃/W 4050 Typical Thermal Resistance (Note RΘJA VR= 20V, Tj= 150 °C2) PF 120 TypicalMaximum Junction Capacitance 1) CJ Junction(Note Capacitance Cj pF -55 to +125 -55 to +150 OperatingVR= Temperature TJ ℃ 0, f= 1Range MHz 4 65 to +175 StorageMaximum TemperatureReverse Range TSTG ℃ Recovery Time trr ns IF= 10mA, VR= 6V, IRR= 1mA, RL= 100Ω 4 CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage @T A=125℃ IR 0.50 0.70 0.85 0.9 0.5 10 NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2010-03 WILLAS ELECTRONIC CORP. 0.92 Volts mAmp WILLAS FM120-M+ 1N4148 300mA SMALL SIGNAL SWITCHING DIODE - 75V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V DO-35 PACKAGE THRU FM1200-M+ Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. Electrical characteristic curves (Ta = 25°C unless specified otherwise) SOD-123H • Low profile surface mounted application in order to optimize board space. • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data 0.040(1.0) 0.024(0.6) • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Marking Code Maximum Recurrent Peak Reverse Voltage VRRM 12 20 13 30 14 40 15 50 16 60 18 80 10 100 115 150 120 200 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Volts Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 150 200 Volts Maximum Average Forward Rectified Current IO IFSM Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) RΘJA Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) CJ Operating Temperature Range TJ Storage Temperature Range 1.0 30 40 120 -55 to +125 Amps Amps ℃/W PF -55 to +150 ℃ - 65 to +175 TSTG ℃ CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage @T A=125℃ 2010-03 NOTES: IR 0.50 0.70 0.85 0.9 0.5 10 0.92 Volts mAmps WILLAS ELECTRONIC CORP. 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 WILLAS ELECTRONIC CORP. WILLAS FM120-M+ 300mA SMALL SIGNAL SWITCHING DIODE - 75V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V DO-35 PACKAGE SOD-123+ PACKAGE Features Information: Ordering • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. Device PN • Low profile surface mounted (1) (2)application in order to 1N4148 ‐T optimize board space. G ‐WS THRU 1N4148 FM1200-M+ Pb Free Product Package outline Packing SOD-123H Tape & Ammo Pack box:5Kpcs/box 0.146(3.7) Bulk: 500pcs/Box 0.130(3.3) (3) (2) loss, high efficiency. • Low power1N4148 ‐B G ‐WS • High current capability, low forward voltage drop. Note: (1) Packing code, Tape & Ammo Pack box capability. • High surge for overvoltage protection. • Guardring (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” • Ultra high-speed switching. epitaxial planar Bulk chip, metal silicon junction. • Silicon (3) Packing code, Packing • Lead-free parts meet environmental standards of MIL-STD-19500 /228 RoHS product for packing code suffix "G" • 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) Halogen free product for packing code suffix "H" Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other Ratings at 25℃ ambient temperature unless otherwise specified. changes. WILLAS or anyone on its behalf assumes no responsibility or liability Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% for any errors or inaccuracies. Data sheet specifications and its information SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNI RATINGS contained are intended to provide a product description only. "Typical" parameters Marking Code 12 13 14 15 16 18 10 115 120 20 30 40 50 60 80 100 150 200 Maximum Recurrent Peak Reverse Voltage Volts which may be included on WILLAS data sheets and/ or specifications can VRRM Volts 14 21 28 35 42 56 70 105 140 Maximum RMS Voltage VRMS and do vary in different applications and actual performance may vary over time. Volts Maximum DC Blocking Voltage 20 30 40 50 60 80 100 150 200 VDC WILLAS does not assume any liability arising out of the application or Amp Maximum Average Forward Rectified Current IO 1.0 use of any product or circuit. Peak Forward Surge Current 8.3 ms single half sine-wave 30 IFSM Amp superimposed on rated load (JEDEC method) ℃/W 40 Typical Thermal Resistance (Note 2) RΘJA WILLAS products are not designed, intended or authorized for use in medical, PF 120 Typical Junction Capacitance (Note 1) CJ -55 to +125 -55 to +150 life‐saving implant or other applications intended for life‐sustaining or other related Operating Temperature Range TJ ℃ - 65 to +175 Storage Temperature Range TSTG ℃ applications where a failure or malfunction of component or circuitry may directly CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT or indirectly cause injury or threaten a life without expressed written approval Volts 0.9 Maximum Forward Voltage at 1.0A DC 0.92 VF 0.50 0.70 0.85 of WILLAS. Customers using or selling WILLAS components for use in 0.5 Maximum Average Reverse Current at @T A=25℃ IR mAm 10 such applications do so at their own risk and shall agree to fully indemnify WILLAS @T A=125℃ Rated DC Blocking Voltage Inc and its subsidiaries harmless against all claims, damages and expenditures. NOTES: MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2010-03 2012-06 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP.