CY8CKIT-141 PSOC® 4 BLE SMA MODULE CY8CKIT-141 PSoC® 4 BLE SMA Module is an easy-to-use solution for creating complete BLE systems. It features a PSoC 4 BLE device, two crystals, and an SMA connector, and other passives, and provides access to all GPIOs of the device. Visit www.cypress.com/BLE for more information on Cypress’s BLE solutions. PSoC 4 BLE is an ARM® Cortex®-M0 based single-chip solution that integrates programmable analog front ends and digital peripherals, the CapSense® technology for touch sensing, and a Bluetooth® Low Energy or Bluetooth Smart radio. Antenna matching network (AMN) SMA connector 24-MHz crystal Cmod GND P3_6 P3_4 P3_2 P3_0 P4_0 P4_1 P2_6 P2_4 P2_2 P2_0 VDDR CY8C4247LQI-BL483 PSoC 4 BLE device VDD GND P1_5 P1_4 P0_1 P0_0 P0_3 P0_2 P0_5 P0_4 P1_0 VREF P1_2 P1_1 P0_6 P1_4 P0_7 P1_3 XRES P1_5 GND P1_7 VDDD P1_6 SAR bypass capacitor (bottom side) and Ctank VDDA P3_7 P3_5 P3_3 P3_1 P5_1 P5_0 P2_7 P2_5 P2_3 P2_1 GND 32.768-kHz crystal (bottom side) 4-pin UART header Fig-1: Pinout Description for PSoC 4 BLE SMA Module Note: To apply power to the module, use the VDD pin (1.9 V - 5.0 V) and GND pin. CY8CKIT-141 PSOC® 4 BLE SMA MODULE STANDALONE USE WITH PSOC CREATORTM IDE AND CY8CKIT-002 MINIPROG3 Pin Mapping CY8CKIT-002 CY8CKIT-141 VTARG VDD GND GND RES XRES SCLK P0_7 SDAT P0_6 Fig-2: Programming and Debugging with CY8CKIT-002 USING THE CY8CKIT-141 MODULE WITH CY8CKIT-042-BLE PIONEER KIT Step 1: Plug the module on the CY8CKIT-042-BLE Pioneer Kit baseboard. Step 2: Create your design in PSoC Creator IDE and use the BLE Pioneer Kit to program and debug. Fig-3: Programming and Debugging with CY8CKIT-042 BLE Pioneer Baseboard Additional regulatory certification will be required to integrate the module into an end product. Contact [email protected] for details. For more information about this kit, visit www.cypress.com/CY8CKIT-141 © 2015 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. 001-96027 Rev.*A