CY8CKIT-042 QUICK START GUIDE PSOC 4 PIONEER KIT ® 1 Download and Install the latest kit software and examples from www.cypress.com/go/CY8CKIT-042 2 3 Connect the board to your computer using the provided USB cable Blue LED Blinks 4 Design with PSoC® CreatorTM CY8CKIT-042 QUICK START GUIDE PSOC 4 PIONEER KIT ® ArduinoTM Compatible I/O Header (J3) ArduinoTM Compatible I/O Header (J4) RGB LED Status LED PSoC 4 Power Supply Jumper (J13) System Power Supply Jumper (J9) USB Connector (J10) PSoC 5LP Programmer and Debugger Power LED CapSense® Slider PSoC 4 External Program Header (J6) PSoC 5LP I/O Header (J8) PSoC 4 44 TQFP PSoC 4 Reset Button Push Button Switch Digilent ® Pmod TM Compatible I/O Header (J5) ArduinoTM Compatible I/O Header (J2) P2_7/D7 P1_0/D6 P3_5/D5 P0_0/D4 P3_7/D3 P0_7/D2 P0_5/D1 P0_4/D0 P4_0/SCL P4_1/SDA P1_7/AREF GND/GND P0_6/D13 P3_1/D12 P3_0/D11 P3_4/D10 P3_6/D9 P2_6/D8 ArduinoTM Compatible I/O Header (J1) P3_7 P3_5 P0_1 P1_2 P0_2 P0_3 VDD P1_5 P1_4 P1_3 GND P1_2 P1_1 A0/P2_0 A1/P2_1 A2/P2_2 A3/P2_3 A4/P2_4 A5/P2_5 P0_0 P0_1 P1_0 NC IOREF/P4_VDD RESET/RESET 3.3V/V3.3_EXT 5V/VBUS GND/GND GND/GND Vin/VIN P3_0 P12_7 VCC/P4_VDD GND/GND SCK/P0_6 MISO/P3_1 MOSI/P3_0 SS/P3_5 P5_VDD P0_0 P3_4 P3_6 P12_6 GND For the latest information about this Kit and to download Kit Software and Hardware files, visit http://www.cypress.com/go/CY8CKIT-042 © 2013 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. Doc.#: 001-86373 Rev.*B Arduino UNO PSoC 4 Pioneer Kit Digilent Pmod