CY5671 PRoC BLE Module Quick Start Guide.pdf

CY5671 PROCTM BLE MODULE
CY5671 PRoCTM BLE Module is a complete, certified solution to add BLE
connectivity to any embedded system. The module features a PRoC BLE device
(CYBL10563), two crystals, a PCB antenna, and other passives while providing
access to all GPIOs of the device.
Visit www.cypress.com/BLE for more information on Cypress’s BLE solutions.
PRoC BLE is a single-chip solution with a 48-MHz ARM® Cortex®-M0 CPU, BLE
radio, CapSense® technology for touch sensing, two serial communication blocks
(SCBs), a 12-bit ADC, four Timer/Counter/PWMs (TCPWMs), four additional
PWMs, I2S, and LCD.
Antenna matching
network (AMN)
Wiggle antenna
Ctank
Cmod
P0_1 P0_0
P0_3 P0_2
P0_5 P0_4
P1_0 VREF
P1_2 P1_1
P0_6 P1_4
P0_7 P1_3
XRES P1_5
GND P1_7
VDDD P1_6
SAR bypass capacitor
(bottom side)
GND
P3_6
P3_4
P3_2
P3_0
P4_0
P4_1
P2_6
P2_4
P2_2
P2_0
VDDR
CYBL10563-56LQXI
PRoC BLE device
VDD
GND
P1_5
P1_4
24-MHz crystal
VDDA
P3_7
P3_5
P3_3
P3_1
P5_1
P5_0
P2_7
P2_5
P2_3
P2_1
GND
32.768-kHz crystal
(bottom side)
4-pin UART header
Fig-1: Pinout Description for PRoC BLE Module
Note: To apply power to the module, use the VDD pin (1.9 V - 5.0 V) and GND pin.
CY5671 PROCTM BLE MODULE
STANDALONE USE WITH PSOC CREATORTM IDE AND CY8CKIT-002 MINIPROG3
Pin Mapping
CY8CKIT-002
CY8CKIT-142
VTARG
VDD
GND
GND
RES
XRES
SCLK
P0_7
SDAT
P0_6
Fig-2: Programming and Debugging with CY8CKIT-002
USING THE PROC BLE MODULE WITH THE CY8CKIT-042-BLE PIONEER KIT
Step 1: Plug the module on the CY8CKIT-042-BLE Pioneer Kit baseboard.
Step 2: Create your design in PSoC Creator IDE and use the BLE Pioneer Kit to
program and debug.
Fig-3: Programming and Debugging with CY8CKIT-042 BLE Pioneer Baseboard
CY5671 is qualified for Bluetooth 4.1 specifications. The module, along with the
CY8CKIT-042 BLE Pioneer Baseboard, has regulatory approval ( for development
purpose only) for the 2.4-GHz unlicensed frequency range in countries including
USA (FCC), Canada (IC), Europe (CE) and Japan (JRF/TELEC).
Additional regulatory certification will be required to integrate the module into an
end product. Contact [email protected] for details.
For more information about this kit, visit www.cypress.com/CY5671
CY5671
Manufactured by Cypress Semiconductor.
R
005-100920
Contains Model: CY5671
FCC ID: WAP-CY5671
IC: 7922A-CY5671
© 2015 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the
properties of their respective owners. 001-96030 Rev.*A
Similar pages