Supertex inc. TN2504 N-Channel Enhancement-Mode Vertical DMOS FET Features ►► ►► ►► ►► ►► ►► ►► General Description Low threshold (1.6V max.) High input impedance Low input capacitance (125pF max.) Fast switching speeds Low on-resistance Free from secondary breakdown Low input and output leakage This low threshold, enhancement-mode (normally-off) transistor utilizes a vertical DMOS structure and Supertex’s well-proven, silicon-gate manufacturing process. This combination produces a device with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, this device is free from thermal runaway and thermally-induced secondary breakdown. Applications ►► ►► ►► ►► ►► ►► ►► Logic level interfaces – ideal for TTL and CMOS Solid state relays Battery operated systems Photo voltaic drives Analog switches General purpose line drivers Telecom switches Supertex’s vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Ordering Information Product Summary Part Number Package Option Packing TN2504N8-G TO-243AA (SOT-89) 2000/Reel -G denotes a lead (Pb)-free / RoHS compliant package. Contact factory for Wafer / Die availablity. Devices in Wafer / Die form are lead (Pb)-free / RoHS compliant. Parameter Value Drain-to-source voltage BVDSS Drain-to-gate voltage BVDGS Gate-to-source voltage ±20V Package θja TO-243AA (SOT-89) 133OC/W Doc.# DSFP-TN2504 B080913 VGS(TH) (max) (min) (max) 1.0Ω 4.0A 1.6V DRAIN SOURCE DRAIN GATE -55OC to +150OC Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. Typical Thermal Resistance 40V ID(ON) Pin Configuration Absolute Maximum Ratings Operating and storage temperature RDS(ON) BVDSS/BVDGS TO-243AA (SOT-89) Product Marking TN5LW W = Code for week sealed = “Green” Packaging Package may or may not include the following marks: Si or TO-243AA (SOT-89) Supertex inc. www.supertex.com TN2504 Thermal Characteristics Package (continuous)† (pulsed) ID Power Dissipation @TC = 25OC IDR† IDRM 890mA 4.5A 1.6W‡ 890mA 4.5A TO-243AA (SOT-89) ID Notes: † ID (continuous) is limited by max rated Tj . ‡ TA = 25°C. Mounted on FR5 Board, 25mm x 25mm x 1.57mm. Electrical Characteristics (T A Sym Parameter BVDSS VGS(th) ΔVGS(th) IGSS = 25OC unless otherwise specified) Min Typ Max Units Drain-to-source breakdown voltage 40 - - V VGS = 0V, ID = 2.0mA Gate threshold voltage 0.6 - 1.6 V VGS = VDS, ID= 1.0mA Change in VGS(th) with temperature - -3.8 -4.5 Gate body leakage - - 100 nA VGS = ± 20V, VDS = 0V - - 10 µA VGS = 0V, VDS = Max Rating - - 1.0 mA VDS = 0.8Max Rating, VGS = 0V, TA = 125°C 1.0 1.7 - 4.0 4.5 - - 1.25 1.5 - 0.8 1.0 - - 0.75 500 700 - IDSS Zero gate voltage drain current ID(ON) On-state drain current RDS(ON) Static drain-to-source on-state resistance ΔRDS(ON) Change in RDS(ON) with temperature GFS Forward transductance CISS Input capacitance - 70 125 COSS Common source output capacitance - 50 70 CRSS Reverse transfer capacitance - 20 25 td(ON) Turn-on delay time - - 10 Rise time - - 10 Turn-off delay time - - 25 Fall time - - 13 Diode forward voltage drop - 1.2 Reverse recovery time - 300 tr td(OFF) tf VSD trr Conditions mV/OC VGS = VDS, ID= 1.0mA A Ω %/ C O VGS = 5.0V, VDS = 15V VGS = 10V, VDS = 15V VGS = 5.0V, ID = 300mA VGS = 10V, ID = 1.5A VGS = 10V, ID = 1.5A mmho VDS = 15V, ID = 2.0A pF VGS = 0V, VDS = 20V, f = 1.0MHz ns VDD = 20V, ID = 500mA, RGEN = 25Ω 1.8 V VGS = 0V, ISD = 1.5A - ns VGS = 0V, ISD = 1.0mA Notes: 1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 10V INPUT 0V Pulse Generator 10% t(ON) td(ON) VDD OUTPUT 0V Doc.# DSFP-TN2504 B080913 VDD 90% t(OFF) tr td(OFF) OUTPUT RGEN tf 10% 10% 90% RL INPUT D.U.T. 90% 2 Supertex inc. www.supertex.com TN2504 Typical Performance Curves BVDSS Variation with Temperature 1.1 On-Resistance vs. ID 2.0 RDS(ON) (ohms) 1.0 0.9 -50 10 0 50 100 VGS = 10V 1.0 0 150 0 1 2 3 Transfer Characteristics V(th) and RDS Variation with Temperature 1.6 VDS = 15V 1.4 VGS(th) (normalized) 6 TA = -55OC 25OC 4 RDS @ 10V, 1.5A 1.2 V(th) @ 1mA 1.0 1.0 0.8 0.8 125OC 0 2 4 6 0.6 8 10 -50 0 VGS (volts) 50 100 0.6 150 TJ (OC) Capacitance vs. Drain-to-Source Voltage Gate Drive Dynamic Characteristics 10 100 f = 1MHz VDS = 10V 8 75 130 pF CISS VGS (volts) C (picofarads) 1.4 1.2 2 0 5 ID (amperes) 8 ID (amperes) 4 TJ (OC) RDS(ON) (normalized) BVDSS (normalized) VGS = 5V 50 COSS 6 4 VDS = 40V 25 2 CRSS 0 0 10 20 30 60 pF 0 40 VDS (volts) Doc.# DSFP-TN2504 B080913 0 0.4 0.8 1.2 1.6 2.0 QG (nanocoloumbs) 3 Supertex inc. www.supertex.com TN2504 Typical Performance Curves (cont.) Output Characteristics 5.0 Saturation Characteristics 5.0 VGS = 10V VGS = 10V 4.0 8V 8V 3.0 ID (amperes) ID (amperes) 4.0 6V 2.0 1.0 3.0 6V 2.0 1.0 4V 4V 3V 0 0 2.0 10 20 30 40 0 50 2 4 6 8 10 VDS (volts) VDS (volts) Transconductance vs. Drain Current Power Dissipation vs. Ambient Temperature 2.0 1.0 PD (watts) V DS =15V GFS (siemens) 3V 0 T A = -55 O C TO-243AA 1.0 25 O C T A =125 O C 0.0 0 1 2 3 4 0 0 5 25 50 ID (amperes) Maximum Rated Safe Operating Area 1.0 10 ID (amperes) Thermal Resistance (normalized) T A = 25 O C TO-243AA (pulsed) 1.0 TO-243AA (DC) 0.1 0.01 1.0 1.0 10 100 125 150 Thermal Response Characteristics 0.8 TO-243AA PD = 1.6W TC = 25OC 0.6 0.4 0.2 0 100 VDS (volts) Doc.# DSFP-TN2504 B080913 75 TA (OC) 0.001 0.01 0.1 1.0 10 tp (seconds) 4 Supertex inc. www.supertex.com TN2504 3-Lead TO-243AA (SOT-89) Package Outline (N8) D D1 C E H L 1 2 E1 3 b b1 e A e1 Top View Symbol Dimensions (mm) Side View A b b1 C D D1 E E1 e MIN 1.40 0.44 0.36 0.35 4.40 1.62 2.29 2.00† NOM - - - - - - - - MAX 1.60 0.56 0.48 0.44 4.60 1.83 2.60 2.29 1.50 BSC e1 3.00 BSC H L 3.94 0.73† - - 4.25 1.20 JEDEC Registration TO-243, Variation AA, Issue C, July 1986. † This dimension differs from the JEDEC drawing Drawings not to scale. Supertex Doc. #: DSPD-3TO243AAN8, Version F111010. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com) Supertex inc. ©2013 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Doc.# DSFP-TN2504 B080913 5 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com