PHILIPS 74LV393D

INTEGRATED CIRCUITS
74LV393
Dual 4-bit binary ripple counter
Product specification
Supersedes data of 1997 Mar 04
IC24 Data Handbook
1997 Jun 10
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
FEATURES
DESCRIPTION
• Optimized for Low Voltage applications: 1.0 to 3.6V
• Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V
• Typical VOLP (output ground bounce) 0.8V @ VCC = 3.3V,
The 74LV393 is a low–voltage Si-gate CMOS device and is pin and
function compatible with 74HC/HCT393.
The 74LV393 is a dual 4-bit binary ripple counter with separate
clocks (1CP, 2CP) and master reset (1MR, 2MR) inputs to each
counter.
Tamb = 25°C
• Typical VOHV (output VOH undershoot) 2V @ VCC = 3.3V,
The operation of each half of the ‘‘393’’ is the same as the ‘‘93’’
except no external clock connections are required. The counters are
triggered by a HIGH-to-LOW transition of the clock inputs. The
counter outputs are internally connected to provide clock inputs to
succeeding stages. The outputs of the ripple counter do not change
synchronously and should not be used for high-speed address
decoding.
Tamb = 25°C
• Two 4-bit binary counters with individual clocks
• Divide-by any binary module up to 28 in one package
• Two master resets to clear each 4-bit counter individually
• Output capability: standard
• ICC category: MSI
The master resets are active-HIGH asynchronous inputs to each
4-bit counter identified by the ‘‘1’’ and ‘‘2’’ in the pin description.
A HIGH level on the nMR input overrides the clock and sets the
outputs LOW.
QUICK REFERENCE DATA
GND = 0V; Tamb = 25°C; tr = tf 2.5 ns
PARAMETER
SYMBOL
CONDITIONS
TYPICAL
UNIT
tPHL/tPLH
Propagation delay
nCP to nQ0
nQ to nQn+1
nMR to nQn
fmax
Maximum clock frequency
99
MHz
CI
Input capacitance
3.5
pF
23
pF
CPD
12
4
11
CL = 15pF
VCC = 3.3V
Power dissipation capacitance per flip-flop
VI = GND to VCC
1
ns
NOTE:
1. CPD is used to determine the dynamic power dissipation (PD in µW)
PD = CPD VCC2 fi (CL VCC2 fo) where:
fi = input frequency in MHz; CL = output load capacity in pF;
fo = output frequency in MHz; VCC = supply voltage in V;
(CL VCC2 fo) = sum of the outputs.
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
OUTSIDE NORTH AMERICA
NORTH AMERICA
14-Pin Plastic DIL
–40°C to +125°C
74LV393 N
74LV393 N
SOT27-1
14-Pin Plastic SO
–40°C to +125°C
74LV393 D
74LV393 D
SOT108-1
14-Pin Plastic SSOP Type II
–40°C to +125°C
74LV393 DB
74LV393 DB
SOT337-1
14-Pin Plastic TSSOP Type I
–40°C to +125°C
74LV393 PW
74LV393PW DH
SOT402-1
PIN CONFIGURATION
PIN DESCRIPTION
1CP
1
14
VCC
1MR
2
13
2CP
1Q0
3
12
2MR
1Q1
4
11
2Q0
1Q2
5
10
2Q1
1Q3
6
9
GND
7
8
PIN
NUMBER
SYMBOL
FUNCTION
1, 13
1CP, 2CP
Clock inputs
(HIGH-to-LOW, edge-triggered)
2, 12
1MR, 2MR
Asynchronous master reset inputs
(active HIGH)
2Q2
3, 4, 5, 6
11, 10, 9, 8
1Q0 to 1Q3
2Q0 to 2Q3
Flip-flop outputs
2Q3
7
GND
Ground (0V)
14
VCC
Positive supply voltage
SV00672
1998 Jun 10
PKG. DWG. #
2
853–1936 19545
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
LOGIC SYMBOL
FUNCTIONAL DIAGRAM
1CP
1
1
1CP
1
1Q0
3
1Q1
4
1Q2
5
BINARY
RIPPLE
2
1MR
1Q3
6
13
2CP
2Q0
11
2Q1
10
2Q2
9
2Q3
8
2
12
4–BIT
2MR
2
1MR
13
2CP
COUNTER
4–BIT
BINARY
RIPPLE
12
COUNTER
2MR
SV00673
0
0
CT
3
6
0
+
1Q3
6
2Q0
11
2Q1
10
2Q2
9
2Q3
8
2
3
4
15
5
14
6
13
7
11
10
11
9
8
SV00676
10
CT
COUNT SEQUENCE FOR 1 COUNTER
9
3
8
COUNT
SV00674
1998 Jun 10
1
12
CTR4
13
5
5
+
CT=0
1Q2
3
4
CT=0
12
4
STATE DIAGRAM
CTR4
1
3
1Q1
SV00675
LOGIC SYMBOL (IEEE/IEC)
2
1Q0
3
OUTPUTS
Q0
Q1
Q2
Q3
0
1
2
3
L
H
L
H
L
L
H
H
L
L
L
L
L
L
L
L
4
5
6
7
L
H
L
H
L
L
H
H
H
H
H
H
L
L
L
L
8
9
10
11
L
H
L
H
L
L
H
H
L
L
L
L
H
H
H
H
12
13
14
15
L
H
L
H
L
L
H
H
H
H
H
H
H
H
H
H
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
LOGIC DIAGRAM
Q
CP
T
Q
FF1
T
RD
Q
FF2
T
RD
Q
FF3
FF4
T
RD
RD
MR
Q0
Q1
Q2
Q3
SV00677
RECOMMENDED OPERATING CONDITIONS
SYMBOL
VCC
PARAMETER
DC supply voltage
CONDITIONS
MIN
TYP
MAX
UNIT
See Note 1
1.0
3.3
3.6
V
VI
Input voltage
0
–
VCC
V
VO
Output voltage
0
–
VCC
V
+85
+125
°C
500
200
100
ns/V
Tamb
Operating ambient temperature range in free
air
tr, tf
Input rise and fall times
See DC and AC
characteristics
VCC = 1.0V to 2.0V
VCC = 2.0V to 2.7V
VCC = 2.7V to 3.6V
–40
–40
–
–
–
–
–
–
NOTES:
1. The LV is guaranteed to function down to VCC = 1.0V (input levels GND or VCC); DC characteristics are guaranteed from VCC = 1.2V to VCC =3.6V.
ABSOLUTE MAXIMUM RATINGS1, 2
In accordance with the Absolute Maximum Rating System (IEC 134).
Voltages are referenced to GND (ground = 0V).
SYMBOL
PARAMETER
VCC
DC supply voltage
CONDITIONS
RATING
UNIT
–0.5 to +4.6
V
±IIK
DC input diode current
VI < –0.5 or VI > VCC + 0.5V
20
mA
±IOK
DC output diode current
VO < –0.5 or VO > VCC + 0.5V
50
mA
±IO
DC output source or sink current
– standard outputs
–0.5V < VO < VCC + 0.5V
25
mA
50
mA
–65 to +150
°C
±IGND,
±ICC
Tstg
PTOT
DC VCC or GND current for types with
– standard outputs
Storage temperature range
Power dissipation per package
– plastic DIL
– plastic mini-pack (SO)
– plastic shrink mini-pack (SSOP and TSSOP)
for temperature range: –40 to +125°C
above +70°C derate linearly with 12 mW/K
above +70°C derate linearly with 8 mW/K
above +60°C derate linearly with 5.5 mW/K
750
500
400
mW
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
1998 Jun 10
4
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
DC CHARACTERISTICS FOR THE LV FAMILY
Over recommended operating conditions. Voltages are referenced to GND (ground = 0V).
LIMITS
SYMBOL
PARAMETER
-40°C to +85°C
TEST CONDITIONS
MIN
VIH
VIL
HIGH level
l
l Input
I
t
voltage
LOW level
l
l Input
I
t
voltage
VOH
HIGH level output
voltage;
STANDARD
outputs
LOW level output
voltage; all outputs
VOL
-40°C to +125°C
MAX
MIN
VCC = 1.2V
0.9
0.9
VCC = 2.0V
1.4
1.4
VCC = 2.7 to 3.6V
2.0
2.0
UNIT
MAX
V
VCC = 1.2V
0.3
0.3
VCC = 2.0V
0.6
0.6
VCC = 2.7 to 3.6V
0.8
0.8
VCC = 1.2V; VI = VIH or VIL; –IO = 100µA
HIGH level output
voltage; all outputs
TYP1
V
1.2
VCC = 2.0V; VI = VIH or VIL; –IO = 100µA
1.8
2.0
1.8
VCC = 2.7V; VI = VIH or VIL; –IO = 100µA
2.5
2.7
2.5
VCC = 3.0V; VI = VIH or VIL; –IO = 100µA
2.8
3.0
2.8
VCC = 3.0V; VI = VIH or VIL; –IO = 6mA
2.40
2.82
2.20
V
VCC = 1.2V; VI = VIH or VIL; IO = 100µA
0
VCC = 2.0V; VI = VIH or VIL; IO = 100µA
0
0.2
0.2
VCC = 2.7V; VI = VIH or VIL; IO = 100µA
0
0.2
0.2
VCC = 3.0V; VI = VIH or VIL; IO = 100µA
0
0.2
0.2
0.25
0.40
0.50
V
LOW level output
voltage;
STANDARD
outputs
VCC = 3.0V; VI = VIH or VIL; IO = 6mA
Input leakage
current
VCC = 3.6V; VI = VCC or GND
1.0
1.0
µA
ICC
Quiescent supply
current; MSI
VCC = 3.6V; VI = VCC or GND; IO = 0
20.0
160
µA
∆ICC
Additional
quiescent supply
current per input
VCC = 2.7V to 3.6V; VI = VCC – 0.6V
500
850
µA
II
NOTE:
1. All typical values are measured at Tamb = 25°C.
1998 Jun 10
5
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
AC CHARACTERISTICS
GND = 0V; tr = tf ≤ 2.5ns; CL = 50pF; RL = 1KW
SYMBOL
tPHL/tPLH
tPHL/tPLH
tPHL
tW
tW
trem
fmax
PARAMETER
Propagation
g
delay
y
nCP to nQ0
Propagation
g
delay
y
nQn to nQn+1
Propagation
delay
g
y
nMR to nQn
Clockk pulse
Cl
l width
idth
HIGH or LOW
Master
M
t resett pulse
l
width
width; HIGH
Removal time
nMR to nCP
Maximum
M
i
clock
l k
pulse
ulse frequency
WAVEFORM
Figure 1
Figure 1
Figure 2
Figure 1
Figure 2
Figure 2
Figure 1
–40 to +85 °C
VCC(V)
MIN
TYP1
1.2
–
2.0
–
2.7
–40 to +125 °C
MAX
MIN
75
–
–
–
26
49
–
60
–
19
36
–
44
3.0 to 3.6
–
142
29
–
35
1.2
–
25
–
–
–
2.0
–
9
17
–
20
2.7
–
6
13
–
15
3.0 to 3.6
–
52
10
–
12
1.2
–
70
–
–
–
2.0
–
24
44
–
54
2.7
–
18
33
–
40
3.0 to 3.6
–
132
26
–
32
2.0
34
10
–
41
–
2.7
25
8
–
30
–
3.0 to 3.6
20
62
–
24
–
2.0
34
12
–
41
–
2.7
25
9
–
30
–
20
72
–
24
–
1.2
–
5
–
–
–
2.0
5
2
–
5
–
2.7
5
2
–
5
–
3.0 to 3.6
5
12
–
5
–
2.0
14
53
–
12
–
2.7
19
72
–
16
–
24
902
–
20
–
3.0 to 3.6
6
UNIT
MAX
3.0 to 3.6
NOTES:
1. All typical values are measured at Tamb = 25°C
2. Typical values are measured at VCC = 3.3V
1998 Jun 10
LIMITS
CONDITION
ns
ns
ns
ns
ns
ns
MHz
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
AC WAVEFORMS
TEST CIRCUIT
VM = 1.5V at VCC 2.7V
VM = 0.5 * VCC at VCC 2.7V
VOL and VOH are the typical output voltage drop that occur with the
output load.
VCC
nCP INPUT
VO
VI
1/fmax
PULSE
GENERATOR
VCC
D.U.T.
50pF
VM
RT
CL
RL = 1k
GND
tPLH
tPHL
Test Circuit for switching times
VOH
DEFINITIONS
nQn OUTPUT
RL = Load resistor
VM
CL = Load capacitance includes jig and probe capacitance
VOL
RT = Termination resistance should be equal to ZOUT of pulse generators.
SV00678
TEST
Figure 1. Clock (nCP) to output (1Qn, 2Qn) propagation delays,
the clock pulse width, and the maximum clock frequency
tPLH/tPHL
VCC
< 2.7V
2.7–3.6V
VCC
nMR INPUT
GND
2.7V
Figure 3. Load circuitry for switching times
tW
trem
VM
nCP INPUT
GND
tPHL
VOH
VM
VOL
SV00679
Figure 2. Master reset (nMR) pulse width,
the master reset to output (Qn) propagation delays,
and the master reset to clock (nCP) removal time
1998 Jun 10
VCC
SV00901
VM
VCC
nQn OUTPUT
VI
7
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
DIP14: plastic dual in-line package; 14 leads (300 mil)
1998 Jun 10
8
SOT27-1
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
SO14: plastic small outline package; 14 leads; body width 3.9 mm
1998 Jun 10
9
SOT108-1
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm
1998 Jun 10
10
SOT337-1
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm
1998 Jun 10
11
SOT402-1
Philips Semiconductors
Product specification
Dual 4-bit binary ripple counter
74LV393
DEFINITIONS
Data Sheet Identification
Product Status
Definition
Objective Specification
Formative or in Design
This data sheet contains the design target or goal specifications for product development. Specifications
may change in any manner without notice.
Preliminary Specification
Preproduction Product
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips
Semiconductors reserves the right to make changes at any time without notice in order to improve design
and supply the best possible product.
Product Specification
Full Production
This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes
at any time without notice, in order to improve design and supply the best possible product.
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products,
including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright,
or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes
only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing
or modification.
LIFE SUPPORT APPLICATIONS
Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices,
or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected
to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips
Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully
indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.
 Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Document order number:
1998 Jun 10
12
Date of release: 05-96
9397-750-04451