DIODES ZXTP25012EZ

ZXTP25012EZ
20V PNP high gain transistor in SOT89
Summary
BVCEO > -12V
hFE > 500
IC(cont) = 4.5A
VCE(sat) < -70mV @ 1A
RCE(sat) = 45m⍀
PD = 2.4W
Complementary part number ZXTN25012EZ
Description
C
Packaged in the SOT89 outline this new low saturation 12V PNP
transistor offers extremely low on state losses making it ideal for use
in DC-DC circuits and various driving and power management
functions.
B
Features
•
4.5A continuous current
•
Up to 10A peak current
•
Very low saturation voltages
•
High gain
E
Applications
E
•
High side switch
•
Battery charging
•
Regulator circuits
•
Buck converters
•
MOSFET gate drivers
C
C
B
Pinout - top view
Ordering information
Device
ZXTP25012EZTA
Reel size
(inches)
Tape width
(mm)
Quantity
per reel
7
12
1000
Device marking
•
1L4
Issue 1- December 2007
© Zetex Semiconductors plc 2007
1
www.zetex.com
ZXTP25012EZ
Absolute maximum ratings
Parameter
Symbol
Limit
Unit
Collector-Base voltage
VCBO
-20
V
Collector-Emitter voltage
VCEO
-12
V
Emitter-Base voltage
VEBO
-7
V
Continuous Collector current(c)
IC
-4.5
A
Base current
IB
-1
A
Peak pulse current
ICM
-10
A
Power dissipation at TA =25°C(a)
PD
1.1
W
8.8
mW/°C
1.8
W
14.4
mW/°C
Linear derating factor
PD
Power dissipation at TA =25°C(b)
Linear derating factor
2.4
W
19.2
mW/°C
4.46
W
35.7
mW/°C
19.2
W
153
mW/°C
Tj, Tstg
-55 to 150
°C
PD
Power dissipation at TA =25°C(c)
Linear derating factor
PD
Power dissipation at TA =25°C(d)
Linear derating factor
PD
Power dissipation at TA =25°C(d)
Linear derating factor
Operating and storage temperature range
Thermal resistance
Parameter
Symbol
Limit
Unit
Junction to
ambient(a)
R⍜JA
117
°C/W
Junction to
ambient(b)
R⍜JA
68
°C/W
Junction to ambient(c)
R⍜JA
51
°C/W
Junction to ambient(d)
R⍜JA
28
°C/W
Junction to case(e)
R⍜JC
7.95
°C/W
NOTES:
(a) For a device surface mounted on 15mm x 15mm x 0.6mm FR4 PCB with high coverage of single sided 1oz copper, in
still air conditions.
(b) Mounted on 25mm x 25mm x 0.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions.
(c) Mounted on 50mm x 50mm x 0.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions.
(d) As (c) above measured at t<5 seconds.
(e) Junction to case (collector tab). Typical
Issue 1- December 2007
© Zetex Semiconductors plc 2007
2
www.zetex.com
ZXTP25012EZ
Thermal characteristics
Issue 1- December 2007
© Zetex Semiconductors plc 2007
3
www.zetex.com
ZXTP25012EZ
Thermal characteristics
Issue 1- December 2007
© Zetex Semiconductors plc 2007
4
www.zetex.com
ZXTP25012EZ
Electrical characteristics (at Tamb = 25°C unless otherwise stated)
Parameter
Collector-Base breakdown
voltage
Collector-Emitter
breakdown voltage
Emitter-Base breakdown
voltage
Collector-Base cut-off
current
Symbol
BVCBO
Min.
-12
Typ.
-35
Max.
Unit
V
Conditions
IC = -100μA
BVCEO
-12
-25
V
IC= -10mA (*)
BVEBO
-7
-8.5
V
IE = -100μA
ICBO
<-1
-50
-0.5
nA
μA
VCB = -12V
VCB = -12V, Tamb=100°C
IEBO
<-1
-50
nA
VEB = -5.6V
VCE(sat)
-55
-155
-185
-200
-70
-265
-355
-285
mV
mV
mV
mV
IC = -1A, IB = -100mA(*)
IC = -1A, IB = -10mA(*)
IC = -2A, IB = -40mA(*)
IC = -4.5A, IB = -450mA(*)
Base-Emitter saturation
voltage
Base-Emitter turn-on
voltage
Static forward current
transfer ratio
VBE(sat)
-990
-1100
mV
IC = -4.5A, IB = -450mA(*)
VBE(on)
-865
-975
mV
IC = -4.5A, VCE = -2V(*)
800
450
85
15
1500
Transition frequency
fT
310
Input capacitance
Cibo
127
Output capacitance
Cobo
16.9
Delay time
td
41
ns
Rise time
tr
62
ns
Storage time
ts
179
ns
Fall time
tf
65
ns
Emitter Base cut-off
current
Collector-Emitter
saturation voltage
hFE
500
300
40
IC = -10mA, VCE = -2V(*)
IC = -1A, VCE = -2V(*)
IC = -4.5A, VCE = -2V(*)
IC = -10A, VCE = -2V(*)
MHz
IC = -50mA, VCE = -10V
f = 100MHz
250
pF
VEB = -0.5V, f = 1MHz(*)
30
pF
VCB = -10V, f = 1MHz(*)
VCC = -10V, IC = -1A,
IB1 = -IB2 = -10mA
NOTES:
(*) Measured under pulsed conditions. Pulse width ≤ 300µs; duty cycle ≤ 2%.
Issue 1- December 2007
© Zetex Semiconductors plc 2007
5
www.zetex.com
ZXTP25012EZ
Typical characteristics
Issue 1- December 2007
© Zetex Semiconductors plc 2007
6
www.zetex.com
ZXTP25012EZ
Package outline
D
A
C
D1
E
H
E1
L
B
e
B1
DIM
e1
Millimeters
Inches
Min
Max
Min
Max
A
1.40
1.60
0.550
0.630
B
0.44
0.56
0.017
B1
0.36
0.48
C
0.35
D
D1
DIM
Millimeters
Inches
Min
Max
Min
Max
E
2.29
2.60
0.090
0.102
0.022
E1
2.13
2.29
0.084
0.090
0.014
0.019
e
1.50 BSC
0.059 BSC
0.44
0.014
0.017
e1
3.00 BSC
0.118 BSC
4.40
4.60
0.173
0.181
H
3.94
4.25
0.155
0.167
1.52
1.83
0.064
0.072
L
0.89
1.20
0.035
0.047
Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches
Issue 1- December 2007
© Zetex Semiconductors plc 2007
7
www.zetex.com
ZXTP25012EZ
Definitions
Product change
Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or
service. Customers are solely responsible for obtaining the latest relevant information before placing orders.
Applications disclaimer
The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for
the user’s application and meets with the user’s requirements. No representation or warranty is given and no liability whatsoever is
assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights
arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract,
tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract,
opportunity or consequential loss in the use of these circuit applications, under any circumstances.
Life support
Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written
approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body
or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or to affect its safety or effectiveness.
Reproduction
The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the
company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a
representation relating to the products or services concerned.
Terms and Conditions
All products are sold subjects to Zetex’ terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two
when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement.
For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office.
Quality of product
Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer.
To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our
regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork
Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels.
ESD (Electrostatic discharge)
Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices.
The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent
of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time.
Devices suspected of being affected should be replaced.
Green compliance
Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce
the use of hazardous substances and/or emissions.
All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with
WEEE and ELV directives.
Product status key:
“Preview”
Future device intended for production at some point. Samples may be available
“Active”
Product status recommended for new designs
“Last time buy (LTB)”
Device will be discontinued and last time buy period and delivery is in effect
“Not recommended for new designs” Device is still in production to support existing designs and production
“Obsolete”
Production has been discontinued
Datasheet status key:
“Draft version”
This term denotes a very early datasheet version and contains highly provisional information, which
may change in any manner without notice.
“Provisional version”
This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance.
However, changes to the test conditions and specifications may occur, at any time and without notice.
“Issue”
This term denotes an issued datasheet containing finalized specifications. However, changes to
specifications may occur, at any time and without notice.
Zetex sales offices
Europe
Americas
Asia Pacific
Corporate Headquarters
Zetex GmbH
Kustermann-park
Balanstraße 59
D-81541 München
Germany
Telefon: (49) 89 45 49 49 0
Fax: (49) 89 45 49 49 49
europe.sales@zetex.com
Zetex Inc
700 Veterans Memorial Highway
Hauppauge, NY 11788
USA
Zetex (Asia Ltd)
3701-04 Metroplaza Tower 1
Hing Fong Road, Kwai Fong
Hong Kong
Zetex Semiconductors plc
Zetex Technology Park, Chadderton
Oldham, OL9 9LL
United Kingdom
Telephone: (1) 631 360 2222
Fax: (1) 631 360 8222
usa.sales@zetex.com
Telephone: (852) 26100 611
Fax: (852) 24250 494
asia.sales@zetex.com
Telephone: (44) 161 622 4444
Fax: (44) 161 622 4446
hq@zetex.com
© 2007 Published by Zetex Semiconductors plc
Issue1- December 2007
© Zetex Semiconductors plc 2007
8
www.zetex.com