ONSEMI BCW65ALT1

BCW65ALT1, BCW65CLT1
General Purpose Transistor
NPN Silicon
Features
• Pb−Free Package is Available
http://onsemi.com
COLLECTOR
3
1
BASE
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector −Emitter Voltage
VCEO
32
Vdc
Collector −Base Voltage
VCBO
60
Vdc
Emitter −Base Voltage
VEBO
5.0
Vdc
IC
800
mAdc
Collector Current − Continuous
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits
are exceeded, device functional operation is not implied, damage may occur
and reliability may be affected.
2
EMITTER
3
SOT−23
CASE 318
STYLE 6
1
2
MARKING DIAGRAM
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Total Device Dissipation FR− 5 Board
(Note 1), TA = 25°C
Derate above 25°C
PD
225
mW
1.8
mW/°C
556
°C/W
300
2.4
mW
mW/°C
RJA
417
°C/W
TJ, Tstg
−55 to +150
°C
Thermal Resistance,
Junction−to−Ambient
Total Device Dissipation Alumina
Substrate, (Note 2) TA = 25°C
Derate above 25°C
Thermal Resistance,
Junction−to−Ambient
Junction and Storage Temperature
RJA
PD
1. FR−5 = 1.0 0.75 0.062 in.
2. Alumina = 0.4 0.3 0.024 in 99.5% alumina.
Ex M
EA = Specific Device Code (BCW65ALT1)
EC = Specific Device Code (BCW65CLT1)
M = Date Code
ORDERING INFORMATION
Device
BCW65ALT1
BCW65ALT1G
BCW65CLT1
Package
Shipping†
SOT−23
3000 / Tape & Reel
SOT−23
(Pb−Free)
3000 / Tape & Reel
SOT−23
3000 / Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
 Semiconductor Components Industries, LLC, 2005
February, 2005 − Rev. 3
1
Publication Order Number:
BCW65ALT1/D
BCW65ALT1, BCW65CLT1
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
Collector −Emitter Breakdown Voltage
(IC = 10 mAdc, IB = 0)
V(BR)CEO
32
−
−
Vdc
Collector −Emitter Breakdown Voltage
(IC = 10 Adc, VEB = 0)
V(BR)CES
60
−
−
Vdc
Emitter −Base Breakdown Voltage
(IE = 10 Adc, IC = 0)
V(BR)EBO
5.0
−
−
Vdc
−
−
−
−
20
20
nAdc
Adc
−
−
20
nAdc
35
75
100
35
−
−
−
−
−
−
250
−
80
180
250
100
−
−
−
−
−
−
630
−
−
−
0.7
0.3
−
−
−
−
2.0
fT
100
−
−
MHz
Output Capacitance
(VCB = 10 Vdc, IE = 0, f = 1.0 MHz)
Cobo
−
−
12
pF
Input Capacitance
(VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz)
Cibo
−
−
80
pF
Noise Figure
(VCE = 5.0 Vdc, IC = 0.2 mAdc, RS = 1.0 k, f = 1.0 kHz, BW = 200 Hz)
NF
−
−
10
dB
Turn−On Time
(IB1 = IB2 = 15 mAdc)
ton
−
−
100
ns
Turn−Off Time
(IC = 150 mAdc, RL = 150 )
toff
−
−
400
ns
OFF CHARACTERISTICS
Collector Cutoff Current
(VCE = 32 Vdc, IE = 0)
(VCE = 32 Vdc, IE = 0, TA = 150°C)
ICES
Emitter Cutoff Current
(VEB = 4.0 Vdc, IC = 0)
IEBO
ON CHARACTERISTICS
DC Current Gain
(IC = 100 Adc, VCE = 10 Vdc)
(IC = 10 mAdc, VCE = 1.0 Vdc)
(IC = 100 mAdc, VCE = 1.0 Vdc)
(IC = 500 mAdc, VCE = 2.0 Vdc)
BCW65ALT1
DC Current Gain
(IC = 100 Adc, VCE = 10 Vdc)
(IC = 10 mAdc, VCE = 1.0 Vdc)
(IC = 100 mAdc, VCE = 1.0 Vdc)
(IC = 500 mAdc, VCE = 2.0 Vdc)
BCW65CLT1
hFE
−
hFE
Collector −Emitter Saturation Voltage
(IC = 500 mAdc, IB = 50 mAdc)
(IC = 100 mAdc, IB = 10 mAdc)
VCE(sat)
Base −Emitter Saturation Voltage
(IC = 500 mAdc, IB = 50 mAdc)
VBE(sat)
−
Vdc
Vdc
SMALL−SIGNAL CHARACTERISTICS
Current −Gain — Bandwidth Product
(IC = 20 mAdc, VCE = 10 Vdc, f = 100 MHz)
SWITCHING CHARACTERISTICS
http://onsemi.com
2
BCW65ALT1, BCW65CLT1
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AK
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD
FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS OF
BASE MATERIAL.
4. 318−03 AND −07 OBSOLETE, NEW STANDARD
318−08.
A
L
3
1
V
B S
2
G
DIM
A
B
C
D
G
H
J
K
L
S
V
C
D
H
J
K
STYLE 6:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
SOLDERING FOOTPRINT*
0.95
0.037
0.95
0.037
2.0
0.079
0.9
0.035
0.8
0.031
SCALE 10:1
mm inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
3
INCHES
MIN
MAX
0.1102
0.1197
0.0472
0.0551
0.0350
0.0440
0.0150
0.0200
0.0701
0.0807
0.0005
0.0040
0.0034
0.0070
0.0140
0.0285
0.0350
0.0401
0.0830
0.1039
0.0177
0.0236
MILLIMETERS
MIN
MAX
2.80
3.04
1.20
1.40
0.89
1.11
0.37
0.50
1.78
2.04
0.013
0.100
0.085
0.177
0.35
0.69
0.89
1.02
2.10
2.64
0.45
0.60
BCW65ALT1, BCW65CLT1
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
4
For additional information, please contact your
local Sales Representative.
BCW65ALT1/D