STMICROELECTRONICS STF18NM60N

STB18NM60N, STF18NM60N,
STP18NM60N, STW18NM60N
N-channel 600 V, 0.26 Ω typ., 13 A MDmesh™ II Power MOSFET
in D2PAK, TO-220FP, TO-220 and TO-247
Datasheet — production data
Features
TAB
Order codes
VDSS
(@Tjmax)
RDS(on)
max.
PTOT
ID
3
STB18NM60N
STF18NM60N
STP18NM60N
1
110 W
650 V
D²PAK
30 W
< 0.285 Ω 13 A
3
1
2
TO-220FP
TAB
110
STW18NM60N
■
100% avalanche tested
■
Low input capacitance and gate charge
■
Low gate input resistance
3
1
2
2
3
1
TO-220
TO-247
Applications
■
Figure 1.
Switching applications
Internal schematic diagram
Description
$4!"
These devices are N-channel Power MOSFETs
developed using the second generation of
MDmesh™ technology. This revolutionary Power
MOSFET associates a vertical structure to the
company’s strip layout to yield one of the world’s
lowest on-resistance and gate charge. It is
therefore suitable for the most demanding high
efficiency converters.
'
3
!-V
Table 1.
Device summary
Order codes
Marking
Package
Packaging
STB18NM60N
18NM60N
D²PAK
Tape and reel
STF18NM60N
18NM60N
TO-220FP
Tube
STP18NM60N
18NM60N
TO-220
Tube
STW18NM60N
18NM60N
TO-247
Tube
October 2012
This is information on a product in full production.
Doc ID 15868 Rev 4
1/21
www.st.com
21
Contents
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
........................... 6
3
Test circuits
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2/21
............................................... 9
Doc ID 15868 Rev 4
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
1
Electrical ratings
Electrical ratings
Table 2.
Absolute maximum ratings
Value
Symbol
Parameter
D²PAK,
TO-220,TO-247
VDS
Drain-source voltage
600
VGS
Gate- source voltage
± 25
Unit
TO-220FP
V
ID
Drain current (continuous) at TC = 25 °C
13
13 (1)
A
ID
Drain current (continuous) at TC = 100 °C
8.2
8.2 (1)
A
Drain current (pulsed)
52
(1)
A
Total dissipation at TC = 25 °C
110
IDM
(2)
PTOT
52
30
W
IAR
Avalanche current, repetitive or not-repetitive
(pulse width limited by TJ max)
4.5
A
EAS
Single pulse avalanche energy
(starting TJ = 25 °C, ID = IAR, VDD = 50 V)
350
mJ
Peak diode recovery voltage slope
15
V/ns
dv/dt(3)
VISO
Insulation withstand voltage (RMS) from all
three leads to external heat sink
(t=1 s;TC=25 °C)
TJ
Tstg
Operating junction temperature
Storage temperature
2500
-55 to 150
V
°C
1. Limited by maximum junction temperature.
2. Pulse width limited by safe operating area.
3. ISD ≤ 13 A, di/dt ≤400 A/µs, VDD ≤80 % V(BR)DSS, VDS(peak) ≤V(BR)DSS
Table 3.
Thermal data
Symbol
Parameter
Rthj-case
Thermal resistance junction-case max
1.14
Rthj-amb
Thermal resistance junction-amb max
62.5
Rthj-pcb(1)
Thermal resistance junction-pcb max
1.
D²PAK TO-220 TO-247 TO-220FP
Unit
4.17
50
62.5
°C/W
30
When mounted on 1inch² FR-4 board, 2 oz Cu.
Doc ID 15868 Rev 4
3/21
Electrical characteristics
2
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Electrical characteristics
(TCASE=25 °C unless otherwise specified)
Table 4.
Symbol
On/off states
Parameter
Test conditions
Drain-source breakdown
voltage
ID = 1 mA, VGS= 0
IDSS
Zero gate voltage drain
current (VGS = 0)
VDS = 600 V
VDS = 600 V, TJ=125 °C
IGSS
Gate body leakage current
(VDS = 0)
VGS = ±25 V
VGS(th)
Gate threshold voltage
VDS= VGS, ID = 250 µA
RDS(on)
Static drain-source onresistance
VGS= 10 V, ID=6.5 A
V(BR)DSS
Table 5.
Symbol
Min.
Typ.
Max.
600
2
Unit
V
3
1
10
µA
µA
±100
nA
4
V
0.260 0.285
Ω
Dynamic
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS = 50 V, f =1 MHz,
VGS = 0
-
1000
60
3
-
pF
pF
pF
Coss eq.(1)
Output equivalent
capacitance
VDS = 0, to 480 V, VGS=0
-
225
-
pF
Rg
Intrinsic resistance
f=1 MHz open drain
-
3.5
-
Ω
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 480 V, ID = 13 A
VGS = 10 V
(see Figure 19)
-
35
6
20
-
nC
nC
nC
Ciss
Coss
Crss
1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
increases from 0 to 80% VDS.
Table 6.
Switching times
Symbol
Parameter
td(on)
tr
td(off)
tf
4/21
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test conditions
VDD = 300 V, ID = 6.5 A,
RG = 4.7 Ω, VGS = 10 V
(see Figure 18)
Doc ID 15868 Rev 4
Min.
Typ.
-
12
15
55
25
Max.
Unit
-
ns
ns
ns
ns
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Table 7.
Symbol
Electrical characteristics
Source drain diode
Parameter
Test conditions
Min.
Typ. Max. Unit
-
13
52
A
A
1.6
V
ISD
ISDM (1)
Source-drain current
Source-drain current (pulsed)
VSD(2)
Forward on voltage
ISD = 13 A, VGS=0
-
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD =13 A, di/dt =100 A/µs,
VDD = 60 V
(see Figure 20)
-
300
4.0
25
ns
µC
A
Reverse recovery time
Reverse recovery charge
Reverse recovery current
VDD = 60 V
di/dt =100 A/µs, ISD = 13 A
Tj = 150°C (see Figure 20)
-
360
4.5
25
ns
µC
A
trr
Qrr
IRRM
trr
Qrr
IRRM
1. Pulse width limited by safe operating area
2.
Pulsed: pulse duration = 300 µs, duty cycle 1.5%
Doc ID 15868 Rev 4
5/21
Electrical characteristics
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
2.1
Electrical characteristics (curves)
Figure 2.
Safe operating area for TO-220 and Figure 3.
D²PAK
Thermal impedance for TO-220 and
D²PAK
AM05525v1
)
S(
on
10
Op
Lim era
ite tion
d
by in th
ma is a
x R re
a
D
is
ID
(A)
10µs
100µs
1ms
1
Tj=150°C
Tc=25°C
10ms
Sinlge
pulse
0.1
0.1
Figure 4.
10
1
100
Safe operating area for TO-220FP
1
Figure 5.
Thermal impedance for TO-220FP
Figure 7.
Thermal impedance for TO-247
AM05526v1
ID
(A)
10
VDS(V)
is
ea )
ar S(on
is
th RD
x
in
n ma
o
ti
y
ra d b
e
e
p
O mit
Li
10µs
100µs
1ms
10ms
Tj=150°C
Tc=25°C
0.1
Sinlge
pulse
0.01
0.1
Figure 6.
10
1
100
VDS(V)
Safe operating area for TO-247
AM05527v1
)
(o
n
10µs
DS
10
Op
Lim era
ite tion
d
by in th
m is
ax ar
R e
a
is
ID
(A)
100µs
1ms
1
Tj=150°C
Tc=25°C
10ms
Sinlge
pulse
0.1
0.1
6/21
1
10
100
VDS(V)
Doc ID 15868 Rev 4
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Figure 8.
Output characteristics
ID
(A)
Figure 9.
AM05528v1
VGS=10V
Electrical characteristics
Transfer characteristics
VDS=19V
7V
24
24
6V
20
20
16
16
12
12
5V
8
8
4
4
0
0
AM05529v1
ID
(A)
8
4
12
20
16
4V
VDS(V)
Figure 10. Static drain-source on resistance
AM05530v1
RDS(on)
(Ω)
0.28
0
0
2
6
8
10 VGS(V)
Figure 11. Gate charge vs gate-source voltage
AM05531v1
VDS
VGS
(V)
12
VGS = 10 V
4
0.27
VDD=480V
(V)
ID=13A
500
10
0.26
400
VDS
0.25
8
0.24
6
300
0.23
200
4
0.22
0.20
0
100
2
0.21
4
2
6
8
10
Figure 12. Capacitance variations
1000
0
10
20
30
40
0
Qg(nC)
Figure 13. Output capacitance stored energy
AM05532v1
C
(pF)
0
12 ID(A)
AM05533v1
Eoss
(µJ)
7
Ciss
6
5
100
4
Coss
10
2
Crss
1
0.1
3
1
10
100
VDS(V)
Doc ID 15868 Rev 4
1
0
0
100
200 300
400 500 600
VDS(V)
7/21
Electrical characteristics
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Figure 14. Normalized gate threshold voltage
vs temperature
AM05534v1
VGS(th)
(norm)
1.10
Figure 15. Normalized on resistance vs
temperature
AM05535v1
RDS(on)
(norm)
2.1
ID = 250 µA
VGS = 10 V
1.9
1.00
1.7
1.5
0.90
1.3
1.1
0.80
0.9
0.70
-50 -25
0.5
-50 -25
0.7
0
25
50
75 100
TJ(°C)
Figure 16. Normalized BVDSS vs temperature
AM09028v1
VDS
(norm)
ID=1mA
1.10
25
0
TJ(°C)
75 100
50
Figure 17. Source-drain diode forward vs
temperature
AM14768v1
VSD
(V)
1.4
1.08
TJ=-50°C
1.2
1.06
TJ=25°C
1.0
1.04
1.02
0.8
1.00
0.6
TJ=150°C
0.98
0.4
0.96
0.94
0.92
-50 -25
8/21
0.2
0
25
50
75 100
TJ(°C)
Doc ID 15868 Rev 4
0
0
2
4
6
8
10
12 ISD(A)
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
3
Test circuits
Test circuits
Figure 18. Switching times test circuit for
resistive load
Figure 19. Gate charge test circuit
VDD
12V
47kΩ
1kΩ
100nF
3.3
μF
2200
RL
μF
VGS
IG=CONST
VDD
100Ω
Vi=20V=VGMAX
VD
RG
2200
μF
D.U.T.
D.U.T.
VG
2.7kΩ
PW
47kΩ
1kΩ
PW
AM01468v1
AM01469v1
Figure 20. Test circuit for inductive load
Figure 21. Unclamped inductive load test
switching and diode recovery times
circuit
A
A
D.U.T.
FAST
DIODE
B
B
L
A
D
G
VD
L=100μH
S
3.3
μF
B
25 Ω
1000
μF
D
VDD
2200
μF
3.3
μF
VDD
ID
G
RG
S
Vi
D.U.T.
Pw
AM01470v1
Figure 22. Unclamped inductive waveform
AM01471v1
Figure 23. Switching time waveform
ton
V(BR)DSS
tdon
VD
toff
tr
tdoff
tf
90%
90%
IDM
10%
ID
VDD
10%
0
VDD
VDS
90%
VGS
AM01472v1
0
Doc ID 15868 Rev 4
10%
AM01473v1
9/21
Package mechanical data
4
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com. ECOPACK
is an ST trademark.
Table 8.
D²PAK (TO-263) mechanical data
mm
Dim.
Min.
Typ.
A
4.40
4.60
A1
0.03
0.23
b
0.70
0.93
b2
1.14
1.70
c
0.45
0.60
c2
1.23
1.36
D
8.95
9.35
D1
7.50
E
10
E1
8.50
10.40
e
2.54
e1
4.88
5.28
H
15
15.85
J1
2.49
2.69
L
2.29
2.79
L1
1.27
1.40
L2
1.30
1.75
R
V2
10/21
Max.
0.4
0°
8°
Doc ID 15868 Rev 4
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Package mechanical data
Figure 24. D²PAK (TO-263) drawing
0079457_T
Figure 25. D²PAK footprint(a)
16.90
12.20
5.08
1.60
3.50
9.75
Footprint
a. All dimension are in millimeters
Doc ID 15868 Rev 4
11/21
Package mechanical data
Table 9.
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
TO-220FP mechanical data
mm
Dim.
Min.
Typ.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
12/21
Max.
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
Doc ID 15868 Rev 4
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Package mechanical data
Figure 26. TO-220FP drawing
7012510_Rev_K_B
Doc ID 15868 Rev 4
13/21
Package mechanical data
Table 10.
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
TO-220 type A mechanical data
mm
Dim.
Min.
Typ.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.70
c
0.48
0.70
D
15.25
15.75
D1
14/21
Max.
1.27
E
10
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13
14
L1
3.50
3.93
L20
16.40
L30
28.90
∅P
3.75
3.85
Q
2.65
2.95
Doc ID 15868 Rev 4
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Package mechanical data
Figure 27. TO-220 type A drawing
0015988_typeA_Rev_S
Doc ID 15868 Rev 4
15/21
Package mechanical data
Table 11.
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
TO-247 mechanical data
mm.
Dim.
Min.
Typ.
A
4.85
5.15
A1
2.20
2.60
b
1.0
1.40
b1
2.0
2.40
b2
3.0
3.40
c
0.40
0.80
D
19.85
20.15
E
15.45
15.75
e
5.30
L
14.20
14.80
L1
3.70
4.30
5.45
L2
16/21
Max.
5.60
18.50
∅P
3.55
3.65
∅R
4.50
5.50
S
5.30
5.50
Doc ID 15868 Rev 4
5.70
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Package mechanical data
Figure 28. TO-247 drawing
0075325_G
Doc ID 15868 Rev 4
17/21
Packaging mechanical data
5
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Packaging mechanical data
Table 12.
D²PAK (TO-263) tape and reel mechanical data
Tape
Reel
mm
mm
Dim.
18/21
Dim.
Min.
Max.
A0
10.5
10.7
A
B0
15.7
15.9
B
1.5
D
1.5
1.6
C
12.8
D1
1.59
1.61
D
20.2
E
1.65
1.85
G
24.4
F
11.4
11.6
N
100
K0
4.8
5.0
T
P0
3.9
4.1
P1
11.9
12.1
Base qty
1000
P2
1.9
2.1
Bulk qty
1000
R
50
T
0.25
0.35
W
23.7
24.3
Doc ID 15868 Rev 4
Min.
Max.
330
13.2
26.4
30.4
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Packaging mechanical data
Figure 29. Tape
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
P0
Top cover
tape
P2
D
E
F
W
K0
B0
A0
P1
D1
User direction of feed
R
Bending radius
User direction of feed
AM08852v2
Figure 30. Reel
T
REEL DIMENSIONS
40mm min.
Access hole
At sl ot location
B
D
C
N
A
Full radius
Tape slot
in core for
tape start 25 mm min.
width
G measured at hub
AM08851v2
Doc ID 15868 Rev 4
19/21
Revision history
6
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Revision history
Table 13.
Document revision history
Date
Revision
15-Jun-2009
1
First release
11-Nov-2009
2
– Added RDS(on) typical value
– Added new package, mechanical data: I²PAK
– Document status promoted from preliminary data to
datasheet
06-Oct-2010
3
Inserted new value in Table 5.
4
Updated title and description on the cover page.
Updated figures 10, 11, 14, 15 and 16.
Updated Section 4: Package mechanical data and Section 5:
Packaging mechanical data.
01-Oct-2012
20/21
Changes
Doc ID 15868 Rev 4
STB18NM60N, STF18NM60N, STP18NM60N, STW18NM60N
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 15868 Rev 4
21/21