Cree® Mini-Dorado LED Model # LD-300CBG2-C5 Data Sheet 3 x 3 mm, QFN-type, high-power, bluish-green LED with water-clear-compound encapsulated Applications • • • • High-luminous-flux output for illumination Exposed-pad design for excellent heat transfer Designed for high-current operation Reflow soldering applicable Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 100 mA IFP 150 mA Reverse Voltage VR 5 V Power Dissipation PD 480 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +85 °C Junction Temperature TJ 110 °C Junction-to-Ambient θJA 135 °C/W θJC 70 °C/W Forward Current Peak Forward Current Junction-to-Case Note 1 Note 2 Note 2 Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on 1.7 mm, Al-based PCB in size of 12 x 12 mm D-CT139.000 Data Sheet: CL Typical Electrical & Optical Characteristics at TA = 25°C (on metal core PCB) Characteristics Symbol Condition Forward Voltage VF IF = 100 mA V Reverse Current IR VR = 5 V μA Dominant Wavelength λD IF = 100 mA nm 495 3 Luminous Flux 50% Power Angle Unit Minimum Note Typical Maximum 4.0 4.8 10 505 lumen IF = 100 mA lm 2θ½H-H IF = 100 mA deg 125 2θ½V-V IF = 100 mA deg 115 510 4.5 Note: A metal core PCB has an effective heat-transmission substrate (thickness of 1.7 mm, Al-based PCB in 12 x 12 mm, θJC <50°C/W should suffice). Subject to change without notice. www.cree.com/ledlamps Standard Bins for LD-300CBG2-C5 (IF = 100 mA) Lamps are sorted to luminous flux (lm), VF and dominant wavelength (λD) bins shown. Orders for LD-300CBG2-C5 may be filled with any or all bins contained as below. Luminous Flux (lm) All luminous flux (lm), VF and dominant wavelength (λD) values shown and specified are at IF = 100 mA. H or above 7 lm G 5.2 lm F 4 lm E 3 lm 495 nm 510 nm Dominant Wavelength (λD) Forward Voltage (VF) Rank Voltage V5 V6 V7 V8 3.2-3.6 V 3.6-4.0 V 4.0-4.4 V 4.4-4.8 V Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous flux is ±10%. 4. Tolerance of measurement of dominant wavelength is ±1 nm. 5. Tolerance of measurement of VF is ±0.01 V. 6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT139.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LD-300CBG2-C5 Rev. No. 02 Graphs Graphs If (mA) 140.0 120.0 100.0 80.0 60.0 40.0 0.0 Vf(V) 2.8 4.8 3.2 3.6 4.0 4.4 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. 1.2 Half Power £ W G L=38nm Domi WL=505nm RELATIVE LUMINOUS FLUX 1.0 0.8 100% 0.6 75% 0.4 50% 0.2 25% 0.0 0.0 If(mA) 25 50 75 100 0% 125 400 500 600 700 800 WL(nm) FIG.3 RELATIVE LUMINOUS FLUX VS. WAVELENGTH. FIG.2 FORWARD CURRENT. IF(mA) 120 100 50% Power Angle : H-H V-V 80 60 0 H-H: 125¢X Ie(%) V-V: 115¢X 100% 80% Tja=135¢X C /W 40 60% 40% 20 0 T ( C) 0 20 40 60 80 20% 100 FIG.4 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items -60 -30 30 0 90 0% FIG.5 FAR FIELD PATTERN Date Prepared by WangFJ 2006-08-28 Rev.No Checked by WangXM 2006-08-28 02 Approved by David 2006-08-28 Date Change Description 2006-08-28 Change lumen bin range and rank from B,C to E,F,G FCN20060295 Data is subject to change without prior notice. please refer to COTCO Website for the latest version. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of International Cree, Inc. Copyright@2002 Cotco Ltd. 60 Revision History Signatures FCN# -90 CLD-CT139.000 4/4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 REV.4 Mechanical Dimensions All dimensions are in mm. SIDE VIEW A B C TOP VIEW A : ANODE B : HEAT SINK C : CATHODE BACK VIEW Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT139.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = Tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LD-300CBG2-C5-00001 Description MD 125 Bluish Green 505nm, FULL RANK, Tape and Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT139.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps