Switching Diode 1SS380 Dimensions (Unit : mm) Applications High speed switching Land size figure (Unit : mm) 0.1±0.1 0.05 0.9MIN. 2.5±0.2 1.7±0.1 Features 1)Ultra small mold type. (UMD2) 2)High reliability 2.1 0.8MIN. 1.25±0.1 UMD2 Construction Silicon epitaxial planar 0.7±0.2 0.1 0.3±0.05 Structure ROHM : UMD2 JEDEC : SOD-323 JEITA : SC-90/A dot (year week factory) Taping dimensions (Unit : mm) 2.0±0.05 φ1.55±0.05 0.3±0.1 4.0±0.1 1.40±0.1 2.8±0.1 2.75 8.0±0.2 3.5±0.05 1.75±0.1 4.0±0.1 φ1.05 1.0±0.1 Absolute maximum ratings (Ta=25C) Parameter Symbol VRM Reverse voltage (repetitive peak) VR Reverse voltage (DC) IFM Forward current Average rectified forward current Io Isurge Surge current (t=1s) Junction temperature Tj Storage temperature Tstg Electrical characteristics (Ta=25C) Parameter Symbol VF Forward voltage Reverse current Capacitance between terminals www.rohm.com ©2011 ROHM Co., Ltd. All rights reserved. Limits Unit V V mA mA mA C C 40 35 225 100 400 150 55 to 150 Min. Typ. Max. Unit - - 1.2 V IF=100mA VR=20V VR=0.5V , f=1MHz IR - - 0.01 μA Ct - - 5.0 pF 1/2 Conditions 2011.08 - Rev.C Data Sheet 1SS380 100 10 Ta=150℃ 100 f=1MHz 10 1 Ta=25℃ Ta=25℃ Ta=150℃ Ta=75℃ 1 Ta=25℃ 0.1 0.01 Ta=25℃ 0.001 0.1 0.0001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 970 950 940 930 AVE:940.0mV 0 150 100 50 7 6 5 4 3 2 1 AVE:3.24pF IR DISPERSION MAP Ct DISPERSION MAP 5 1cyc 8.3ms AVE:9.60A 20 Ta=25℃ VR=6V IF=10mA RL=100Ω Irr=0.1*IR n=10pcs 4 3 PEAK SURGE FORWARD CURRENT : I FSM(A) REVERSE RECOVERY TIME:trr(ns) Ifsm 5 8 0 VF DISPERSION MAP 15 2 1 Ifsm 15 8.3ms 10 5 0 0 1 IFSM DISPERSION MAP trr DISPERSION MAP 20 15 10 5 100 Rth(j-c) Mounted on epoxy board IM=1mA 10 1ms IF=50mA time 0.1 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 100 25 20 15 10 0.001 0 0.01 0.1 1 10 TIME:t(s) Rth-t CHARACTERISTICS 2/2 100 1000 AVE:5.1kV AVE:3.70kV 5 300us 1 0 100 Rth(j-a) ELECTROSTATIC DDISCHARGE TEST ESD(KV) t TRANSIENT THAERMAL IMPEDANCE : Rth (℃/W) PEAK SURGE FORWARD CURRENT : I FSM(A) Ifsm 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 30 1000 25 8.3ms 1cyc AVE:1.20ns 0 30 30 Ta=25℃ f=1MHz VR=0V n=10pcs 9 0 10 10 20 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS 10 Ta=25℃ VR=20V n=30pcs AVE:40.51pA 920 PEAK SURGE FORWARD CURRENT : I FSM(A) 20 CAPACITANCE BETWEEN TERMINALS:Ct(pF) REVERSE CURRENT: IR(pA) 960 5 10 15 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS 200 Ta=25℃ IF=100mA n=30pcs 1 0.1 0 FORWARD VOLTAGE : VF(V) VF-IF CHARACTERISTICS FORWARD VOLTAGE : V F(mV) CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=125℃ Ta=75℃ 10 REVERSE CURRENT : IR(nA) FORWARD CURRENT : I F(mA) Ta=125℃ C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP 2011.08 - Rev.C Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A