PANASONIC 2SC5505

Power Transistors
2SC5505
Silicon NPN epitaxial planar type
For power amplification
Unit: mm
4.6±0.2
9.9±0.3
3.0±0.5
2.9±0.2
■ Features
■ Absolute Maximum Ratings TC = 25°C
Parameter
Symbol
Rating
Unit
Collector-base voltage (Emitter open)
VCBO
60
V
Collector-emitter voltage (Base open)
VCEO
60
V
Emitter-base voltage (Collector open)
VEBO
5
V
Collector current
IC
8
A
Peak collector current
ICP
16
A
Collector power dissipation
PC
20
W
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to +150
°C
Ta = 25°C
15.0±0.5
φ 3.2±0.1
13.7±0.2
4.2±0.2
Solder Dip
• High-speed switching
• TO-220D built-in: Excellent package with withstand voltage 5 kV
guaranteed
1.4±0.2
1.6±0.2
2.6±0.1
0.8±0.1
0.55±0.15
2.54±0.30
5.08±0.50
1
2
3
1: Base
2: Collector
3: Emitter
TO-220D-A1 Package
2.0
■ Electrical Characteristics TC = 25°C ± 3°C
Parameter
Symbol
Conditions
Collector-emitter voltage (Base open)
VCEO
IC = 10 mA, IB = 0
Collector-base cutoff current (Emitter open)
ICBO
VCB = 60 V, IE = 0
Collector-emitter cutoff current (Base open)
ICEO
VCE = 60 V, IB = 0
Forward current transfer ratio
hFE1
VCE = 2 V, IC = 1 A
80
50
hFE2
VCE = 2 V, IC = 5 A
Collector-emitter saturation voltage
VCE(sat)
IC = 5 A, IB = 0.25 A
Base-emitter saturation voltage
VBE(sat)
IC = 5 A, IB = 0.25 A
Turn-on time
ton
IC = 4 A
Storage time
tstg
IB1 = 400 mA, IB2 = −400 mA
VCC = 50 V
Fall time
tf
Min
Typ
Max
Unit
100
µA
60
V
100
µA
280

1.2
V
1.7
V
0.5
µs
0.5
1.0
µs
0.10
0.15
µs
0.2
Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
Publication date: February 2003
SJD00287AED
1
2SC5505
Rth  t
Area of safe operation
100
10
1
t=1s
t = 10 ms
t = 1 ms
t = 0.1 ms
Ta = 25°C
(1)
Thermal resistance Rth (°C/W)
Collector current IC (A)
Non repetitive pulse
TC = 25°C
(2)
10
1
0.1
0.1
10
100
0.01
0.001
(1) Without heat sink
(2) With a 10 × 10 × 2 mm Al heat sink
0.01
Collector-emitter voltage VCE (V)
2
0.1
1
Time t (s)
SJD00287AED
10
100
1 000
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government
if any of the products or technologies described in this material and controlled under the "Foreign
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the
product or technologies as described in this material.
(4) The products described in this material are intended to be used for standard applications or general
electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without
notice for modification and/or improvement. At the final stage of your design, purchasing, or use of
the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that
the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of
incidence of break down and failure mode, possible to occur to semiconductor products. Measures
on the systems such as redundant design, arresting the spread of fire or preventing glitch are
recommended in order to prevent physical injury, fire, social damages, for example, by using the
products.
(7) When using products for which damp-proof packing is required, observe the conditions (including
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets
are individually exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL