ETC 2.22246E+11

BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
KP AXIAL EPOXY LACQUERED TYPE
handbook, full pagewidth
CBA369
Fig.1 Simplified outlines.
FEATURES
• Supplied loose in box, taped on reel
or unidirectional.
APPLICATIONS
• In circuits where close tolerance,
reliability and low losses are of
prime importance, for example:
tuned circuits, filter and timing
networks.
DETAIL SPECIFICATION
For more detailed data and test
requirements see “Type detail
specification HQN-384-13/101”.
1999 Apr 29
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Capacitance range (E12 series)
47 to 62000 pF
Capacitance tolerance
±5% (E24 series);
±2% (E24, E48 series);
±1% (E24, E48, E96 series)
Rated (DC) voltage
63 V; 160 V; 250 V; 400 V; 630 V
Climatic category
40/100/56
Rated temperature
85 °C
Maximum application temperature
100 °C
Reference specification
IEC 60384-13
Stability class for:
63; 160; 250 V versions
class 1
400; 630 V versions
class 2
584
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
COMPOSITION OF CATALOGUE NUMBER
MULTIPLIER
(nF)
TYPE AND VOLTAGES
460
63 V
0.0001
9
461
160 V
0.001
1
462
250 V
0.01
2
463
400 V
0.1
3
464
630 V
CAPACITANCE
(numerically)
Example:
1003 = 100 × 0.1 = 10 nF
2222
PACKAGING
Taped on reel
Loose in box
Unidirectional
1999 Apr 29
XXX X XXX X
TAPE DISTANCE
C-TOL
tape distance = 63.5 mm
lead length 30.0 or 28.0 mm; see tables
with catalogue numbers
H = 16.5 mm
585
±1%
8
±2%
7
±5%
6
±1%
4
±2%
3
±5%
2
±1%
1
±2%
0
BC Components
Product specification
Polypropylene film foil capacitors
KP 460
KP 460 GENERAL DATA
7.2 max.
dmax
(1)
ltot
handbook, full pagewidth
≤1
≤1
Ød
ltot lmax
Ø1.3
lt
16.5
Ødt
lmax
lt
seating plane(2)
(1) ltot ≤ 13 mm for lmax = 11 mm;
ltot ≤ 16 mm for lmax = 15 mm.
(2) Hole ∅1.0.
Fig.3 Outlines.
5.08 +0.4
−0.2
CBA370
Specific reference data for the 63 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
5000 pF < C ≤ 20000 pF
20000 pF < C ≤ 47000 pF
C > 47000 pF
Rated voltage pulse slope (dU/dt)R at 63 V (DC)
R between leads; at 10 V; 1 minute
R between interconnected leads and case; 10 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 1 kHz
at 100 kHz
≤5 × 10−4
≤5 × 10−4
≤5 × 10−4
≤15 × 10−4
≤25 × 10−4
≤40 × 10−4
10000 V/µs
>100000 MΩ
>100000 MΩ
126 V; 1 minute
400 V; 1 minute
Available 63 V DC versions
PACKAGING
Taped on reel; notes 1 and 2
Loose in box; note 1
Unidirectional; notes 1 and 2
C-tol
±1%
±2%
±5%
±1%
±2%
±5%
±1%
±2%
FIRST 8 DIGITS OF
CATALOGUE NUMBER
2222 460 8....
2222 460 7....
2222 460 6....
2222 460 4....
2222 460 3....
2222 460 2....
2222 460 1....
2222 460 0....
Available on request
PACKAGING
TAPE DISTANCE (mm)
52.5; note 2
63.5; note 2
52.5; note 2
Taped in ammopack
Taped on reel
Notes
1.
For SPQ refer to this handbook, chapter “Packaging information”.
2. For detailed specifications refer to this handbook, chapter “Packaging information”.
1999 Apr 29
586
ORDERING
preferred
preferred
on request
on request
on request
on request
on request
on request
BC Components
Product specification
Polypropylene film foil capacitors
KP 460
URdc = 63 V; URac = 40 V
CATALOGUE NUMBER
C(1)
(E24)
(pF)
DIMENSIONS
dmax × lmax
(mm)
TAPED ON REEL
MASS
(g)
UNIDIRECTIONAL
TAPE DISTANCE 63.5 mm
C-tol = ±2%
C-tol = ±1%
C-tol = ±2%
C-tol = ±1%
catalogue number(2)
last 5 digits(2)
last 5 digits
last 5 digits
0.5
2222 460 76802
.. 86802
.. 06802
.. 16802
0.5
2222 460 77502
.. 87502
.. 07502
.. 17502
0.6
2222 460 78202
.. 88202
.. 08202
.. 18202
0.6
2222 460 79102
.. 89102
.. 09102
.. 19102
0.6
2222 460 71003
.. 81003
−
−
−
−
−
−
−
−
−
−
−
−
lt = 30.0 mm; dt = 0.60 ±0.06 mm
6800
7500
8200
5.0 × 11.0
9100
lt = 28.0 mm; dt = 0.60 ±0.06 mm
10000
11000
0.6
2222 460 71103
.. 81103
12000
0.7
2222 460 71203
.. 81203
13000
0.8
2222 460 71303
.. 81303
0.7
2222 460 71503
.. 81503
15000
6.0 × 15.0
16000
0.7
2222 460 71603
.. 81603
18000
0.8
2222 460 71803
.. 81803
20000
0.8
2222 460 72003
.. 82003
22000
0.9
2222 460 72203
.. 82203
24000
0.9
2222 460 72403
.. 82403
1.0
2222 460 72703
.. 82703
27000
6.5 × 15.0
30000
33000
7.0 × 15.0
36000
39000
43000
47000
51000
56000
62000
7.5 × 15.0
8.0 × 15.0
8.5 × 15.0
1.1
2222 460 73003
.. 83003
1.2
2222 460 73303
.. 83303
1.2
2222 460 73603
.. 83603
1.3
2222 460 73903
.. 83903
1.4
2222 460 74303
.. 84303
1.5
2222 460 74703
.. 84703
1.6
2222 460 75103
.. 85103
1.7
2222 460 75603
.. 85603
1.8
2222 460 76203
.. 86203
Notes
1. In addition to the values of the E24 series as quoted, intermediate values are available of the E48 series (with a
tolerance of ±2% or ±1%) and the E96 series (with a tolerance of ±1%). The specifications of these intermediate
values are equal to the specifications of the next higher value of the E24 series.
2. The shading indicates preferred types.
1999 Apr 29
587
BC Components
Product specification
Polypropylene film foil capacitors
KP 461
KP 461 GENERAL DATA
7.2 max.
dmax
(1)
ltot
handbook, full pagewidth
≤1
≤1
Ød
ltot lmax
Ø1.3
lt
16.5
Ødt
lmax
lt
seating plane(2)
(1) ltot ≤ 13 mm for lmax = 11 mm;
ltot ≤ 16 mm for lmax = 15 mm.
(2) Hole ∅1.0.
Fig.4 Outlines.
5.08 +0.4
−0.2
CBA370
Specific reference data for the 160 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
1000 pF < C ≤ 5000 pF
5000 pF < C ≤ 20000 pF
20000 pF < C ≤ 39000 pF
Rated voltage pulse slope (dU/dt)R at 160 V (DC)
R between leads; at 100 V; 1 minute
R between interconnected leads and case; 100 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 1 kHz
at 100 kHz
≤5 × 10−4
≤5 × 10−4
≤5 × 10−4
≤10 × 10−4
≤15 × 10−4
≤25 × 10−4
10000 V/µs
>100000 MΩ
>100000 MΩ
320 V; 1 minute
400 V; 1 minute
Available 160 V DC versions
PACKAGING
Taped on reel; notes 1 and 2
Loose in box; note 1
Unidirectional; notes 1 and 2
C-tol
±1%
±2%
±5%
±1%
±2%
±5%
±1%
±2%
FIRST 8 DIGITS OF
CATALOGUE NUMBER
2222 461 8....
2222 461 7....
2222 461 6....
2222 461 4....
2222 461 3....
2222 461 2....
2222 461 1....
2222 461 0....
Available on request
PACKAGING
TAPE DISTANCE (mm)
52.5; note 2
63.5; note 2
52.5; note 2
Taped in ammopack
Taped on reel
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”.
2. For detailed specifications refer to this handbook, chapter “Packaging information”.
1999 Apr 29
588
ORDERING
preferred
preferred
on request
on request
on request
on request
on request
on request
BC Components
Product specification
Polypropylene film foil capacitors
KP 461
URdc = 160 V; URac = 63 V
CATALOGUE NUMBER
C(1)
(E24)
(pF)
DIMENSIONS
dmax × lmax
(mm)
TAPED ON REEL
MASS
(g)
UNIDIRECTIONAL
TAPE DISTANCE 63.5 mm
C-tol = ±2%
C-tol = ±1%
C-tol = ±2%
C-tol = ±1%
catalogue number(2)
last 5 digits(2)
last 5 digits
last 5 digits
lt = 30.0 mm; dt = 0.60 ±0.06 mm
3600
0.5
2222 461 73602
.. 83602
.. 03602
.. 13602
3900
0.5
2222 461 73902
.. 83902
.. 03902
.. 13902
4300
0.5
2222 461 74302
.. 84302
.. 04302
.. 14302
4700
5.0 × 11.0
0.5
2222 461 74702
.. 84702
.. 04702
.. 14702
5100
0.5
2222 461 75102
.. 85102
.. 05102
.. 15102
5600
0.5
2222 461 75602
.. 85602
.. 05602
.. 15602
6200
0.6
2222 461 76202
.. 86202
.. 06202
.. 16202
6800
0.4
2222 461 76802
.. 86802
7500
0.7
2222 461 77502
.. 87502
8200
0.6
2222 461 78202
.. 88202
9100
0.6
2222 461 79102
.. 89102
0.7
2222 461 71003
.. 81003
−
−
−
−
−
−
lt = 28.0 mm; dt = 0.60 ±0.06 mm
10000
6.0 × 15.0
11000
0.7
2222 461 71103
.. 81103
12000
0.7
2222 461 71203
.. 81203
13000
0.8
2222 461 71303
.. 81303
15000
0.8
2222 461 71503
.. 81503
16000
0.9
2222 461 71603
.. 81603
0.9
2222 461 71803
.. 81803
18000
6.5 × 15.0
20000
1.0
2222 461 72003
.. 82003
22000
1.1
2222 461 72203
.. 82203
1.1
2222 461 72403
.. 82403
7.5 × 15.0
1.2
2222 461 72703
.. 82703
−
−
8.0 × 15.0
1.3
2222 461 73003
.. 83003
1.4
2222 461 73303
.. 83303
−
−
1.5
2222 461 73603
.. 83603
1.6
2222 461 73903
.. 83903
−
−
24000
27000
30000
33000
36000
39000
7.0 × 15.0
8.5 × 15.0
Notes
1. In addition to the values of the E24 series as quoted, intermediate values are available of the E48 series (with a
tolerance of ±2% or ±1%) and the E96 series (with a tolerance of ±1%). The specifications of these intermediate
values are equal to the specifications of the next higher value of the E24 series.
2. The shading indicates preferred types.
1999 Apr 29
589
BC Components
Product specification
Polypropylene film foil capacitors
KP 462
KP 462 GENERAL DATA
7.2 max.
dmax
(1)
ltot
handbook, full pagewidth
≤1
≤1
Ød
ltot lmax
Ø1.3
lt
16.5
Ødt
lmax
lt
seating plane(2)
(1) ltot ≤ 13 mm for lmax = 11 mm
ltot ≤ 16 mm for lmax = 15 mm.
(2) Hole ∅1.0.
Fig.5 Outlines.
5.08 +0.4
−0.2
CBA370
Specific reference data for the 250 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
1 000 pF < C ≤ 5000 pF
5 000 pF < C ≤ 20000 pF
20 000 pF < C ≤ 22000 pF
Rated voltage pulse slope (dU/dt)R at 250 V (DC)
R between leads; at 100 V; 1 minute
R between interconnected leads and case; 100 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 1 kHz
at 100 kHz
≤5 × 10−4
≤5 × 10−4
≤5 × 10−4
≤10 × 10−4
≤15 × 10−4
≤25 × 10−4
10000 V/µs
>100000 MΩ
>100000 MΩ
500 V; 1 minute
500 V; 1 minute
Available 250 V DC versions
PACKAGING
Taped on reel; notes 1 and 2
Loose in box; note 1
Unidirectional; notes 1 and 2
C-tol
±1%
±2%
±5%
±1%
±2%
±5%
±1%
±2%
FIRST 8 DIGITS OF
CATALOGUE NUMBER
2222 462 8....
2222 462 7....
2222 462 6....
2222 462 4....
2222 462 3....
2222 462 2....
2222 462 1....
2222 462 0....
Available on request
PACKAGING
TAPE DISTANCE (mm)
52.5; note 2
63.5; note 2
52.5; note 2
Taped in ammopack
Taped on reel
Notes
1.
For SPQ refer to this handbook, chapter “Packaging information”.
2. For detailed specifications refer to this handbook, chapter “Packaging information”.
1999 Apr 29
590
ORDERING
preferred
preferred
on request
on request
on request
on request
on request
on request
BC Components
Product specification
Polypropylene film foil capacitors
KP 462
URdc = 250 V; URac = 125 V
CATALOGUE NUMBER
C(1)
(E24)
(pF)
DIMENSIONS
dmax × lmax
(mm)
TAPED ON REEL
MASS
(g)
TAPE DISTANCE 63.5 mm
C-tol = ±2%
catalogue
number(2)
C-tol = ±1%
last 5
digits(2)
UNIDIRECTIONAL
C-tol = ±2%
C-tol = ±1%
last 5 digits
last 5 digits
.. 01202
.. 01302
.. 01502
.. 01602
.. 01802
.. 02002
.. 02202
.. 02402
.. 02702
.. 03002
.. 03302
.. 11202
.. 11302
.. 11502
.. 11602
.. 11802
.. 12002
.. 12202
.. 12402
.. 12702
.. 13002
.. 13302
−
−
−
−
−
−
−
−
−
−
−
−
lt = 30.0 mm; dt = 0.60 ±0.06 mm
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
5.0 × 11.0
0.5
0.5
0.4
0.5
0.6
0.6
0.5
0.5
0.5
0.5
0.5
2222 462 71202
2222 462 71302
2222 462 71502
2222 462 71602
2222 462 71802
2222 462 72002
2222 462 72202
2222 462 72402
2222 462 72702
2222 462 73002
2222 462 73302
.. 81202
.. 81302
.. 81502
.. 81602
.. 81802
.. 82002
.. 82202
.. 82402
.. 82702
.. 83002
.. 83302
0.5
0.5
0.6
0.6
0.6
0.6
0.7
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.1
1.2
1.3
1.4
1.5
2222 462 73602
2222 462 73902
2222 462 74302
2222 462 74702
2222 462 75102
2222 462 75602
2222 462 76202
2222 462 76802
2222 462 77502
2222 462 78202
2222 462 79102
2222 462 71003
2222 462 71103
2222 462 71203
2222 462 71303
2222 462 71503
2222 462 71603
2222 462 71803
2222 462 72003
2222 462 72203
.. 83602
.. 83902
.. 84302
.. 84702
.. 85102
.. 85602
.. 86202
.. 86802
.. 87502
.. 88202
.. 89102
.. 81003
.. 81103
.. 81203
.. 81303
.. 81503
.. 81603
.. 81803
.. 82003
.. 82203
lt = 28.0 mm; dt = 0.60 ±0.06 mm
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
9100
10000
11000
12000
13000
15000
16000
18000
20000
22000
6.0 × 15.0
6.5 × 15.0
7.0 × 15.0
7.5 × 15.0
8.0 × 15.0
8.5 × 15.0
Notes
1. In addition to the values of the E24 series as quoted, intermediate values are available of the E48 series (with a
tolerance of ±2% or ±1%) and the E96 series (with a tolerance of ±1%). The specifications of these intermediate
values are equal to the specifications of the next higher value of the E24 series.
2. The shading indicates preferred types.
1999 Apr 29
591
BC Components
Product specification
Polypropylene film foil capacitors
KP 463
KP 463 GENERAL DATA
7.2 max.
dmax
ltot(1)
handbook, full pagewidth
≤1
≤1
Ød
ltot lmax
Ø1.3
lt
16.5
Ødt
lmax
lt
seating plane(2)
(1) ltot ≤ 13 mm for lmax = 11 mm
ltot ≤ 16 mm for lmax = 15 mm.
(2) Hole ∅1.0.
5.08
+0.4
−0.2
CBA370
Fig.6 Outlines.
Specific reference data for the 400 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
C ≤ 1000 pF
1 000 pF < C ≤ 5000 pF
Rated voltage pulse slope (dU/dt)R at 400 V (DC)
R between leads; at 100 V; 1 minute
R between interconnected leads and case; 100 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 1 kHz
at 100 kHz
at 1 MHz(1)
≤5 × 10−4
≤5 × 10−4
−
≤10 × 10−4
10000 V/µs
>100000 MΩ
>100000 MΩ
800 V; 1 minute
800 V; 1 minute
≤10 × 10−4
−
Note
1. For unidirectional capacitors ≤13 × 10−4.
Available 400 V DC versions
PACKAGING
Taped on reel; notes 1 and 2
Loose in box; note 1
Unidirectional; notes 1 and 2
C-tol
±1%
±2%
±5%
±1%
±2%
±5%
±1%
±2%
FIRST 8 DIGITS OF
CATALOGUE NUMBER
2222 463 8....
2222 463 7....
2222 463 6....
2222 463 4....
2222 463 3....
2222 463 2....
2222 463 1....
2222 463 0....
Available on request
PACKAGING
TAPE DISTANCE (mm)
52.5; note 2
63.5; note 2
52.5; note 2
Taped in ammopack
Taped on reel
Notes
1.
For SPQ refer to this handbook, chapter “Packaging information”.
2. For detailed specifications refer to this handbook, chapter “Packaging information”.
1999 Apr 29
592
ORDERING
preferred
preferred
on request
on request
on request
on request
on request
on request
BC Components
Product specification
Polypropylene film foil capacitors
KP 463
URdc = 400 V; URac = 160 V
CATALOGUE NUMBER
C(1)
(E 24)
(pF)
DIMENSIONS
dmax × lmax
(mm)
TAPED ON REEL
MASS
(g)
TAPE DISTANCE 63.5 mm
UNIDIRECTIONAL
C-tol = ±2%
C-tol = ±1%
C-tol = ±2%
C-tol = 1%
catalogue number(2)
last 5 digits(2)
last 5 digits
last 5 digits
0.5
0.5
0.5
0.5
0.5
0.5
0.5
2222 463 76201
2222 463 76801
2222 463 77501
2222 463 78201
2222 463 79101
2222 463 71002
2222 463 71102
.. 86201
.. 86801
.. 87501
.. 88201
.. 89101
.. 81002
.. 81102
.. 06201
.. 06801
.. 07501
.. 08201
.. 09101
.. 01002
.. 01102
.. 16201
.. 16801
.. 17501
.. 18201
.. 19101
.. 11002
.. 11102
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.7
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.1
1.2
1.3
2222 463 71202
2222 463 71302
2222 463 71502
2222 463 71602
2222 463 71802
2222 463 72002
2222 463 72202
2222 463 72402
2222 463 72702
2222 463 73002
2222 463 73302
2222 463 73602
2222 463 73902
2222 463 74302
2222 463 74702
2222 463 75102
2222 463 75602
2222 463 76202
2222 463 76802
2222 463 77502
2222 463 78202
.. 81202
.. 81302
.. 81502
.. 81602
.. 81802
.. 82002
.. 82202
.. 82402
.. 82702
.. 83002
.. 83302
.. 83602
.. 83902
.. 84302
.. 84702
.. 85102
.. 85602
.. 86202
.. 86802
.. 87502
.. 88202
−
−
−
−
−
−
−
−
−
−
−
−
lt = 30.0 mm; dt = 0.60 ±0.06 mm
620
680
750
820
910
1000
1100
5.0 × 11.0
lt = 28.0 mm; dt = 0.60 ±0.06 mm
1200
1 300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
6.0 × 15.0
6.5 × 15.0
7.0 × 15.0
7.5 × 15.0
8.0 × 15.0
8.5 × 15.0
Notes
1. In addition to the values of the E24 series as quoted, intermediate values are available of the E48 series (with a
tolerance of ±2% or ±1%) and the E96 series (with a tolerance of ±1%). The specifications of these intermediate
values are equal to the specifications of the next higher value of the E24 series.
2. The shading indicates preferred types.
1999 Apr 29
593
BC Components
Product specification
Polypropylene film foil capacitors
KP 464
KP 464 GENERAL DATA
7.2 max.
dmax
(1)
ltot
handbook, full pagewidth
≤1
≤1
Ød
ltot lmax
Ø1.3
lt
16.5
Ødt
lmax
(1) ltot ≤ 13 mm for lmax = 11 mm.
ltot ≤ 16 mm for lmax = 15 mm.
(2) Hole ∅1.0.
lt
seating plane(2)
Fig.7 Outlines.
5.08 +0.4
−0.2
CBA370
Specific reference data for the 630 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
C ≤ 560 pF
Rated voltage pulse slope (dU/dt)R at 630 V (DC)
R between leads; at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 1 kHz
at 1 MHz(1)
≤5 × 10−4
≤10 × 10−4
10000 V/µs
>100000 MΩ
>100000 MΩ
1260 V; 1 minute
1260 V; 1 minute
Note
1. For unidirectional capacitors ≤13 × 10−4.
Available 630 V DC versions
PACKAGING
Taped on reel; notes 1 and 2
Loose in box; note 1
Unidirectional; notes 1 and 2
C-tol
±1%
±2%
±5%
±1%
±2%
±5%
±1%
±2%
FIRST 8 DIGITS OF
CATALOGUE NUMBER
2222 464 8....
2222 464 7....
2222 464 6....
2222 464 4....
2222 464 3....
2222 464 2....
2222 464 1....
2222 464 0....
Available on request
PACKAGING
TAPE DISTANCE (mm)
52.5; note 2
63.5; note 2
52.5; note 2
Taped in ammopack
Taped on reel
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”.
2. For detailed specifications refer to this handbook, chapter “Packaging information”.
1999 Apr 29
594
ORDERING
preferred
preferred
on request
on request
on request
on request
on request
on request
BC Components
Product specification
Polypropylene film foil capacitors
KP 464
URdc = 630 V; URac = 200 V
CATALOGUE NUMBER
C(1)
(E24)
(pF)
DIMENSIONS
dmax × lmax
(mm)
TAPED ON REEL
MASS
(g)
UNIDIRECTIONAL
TAPE DISTANCE 63.5 mm
C-tol = ±2%
C-tol = ±1%
C-tol = ±2%
C-tol = ±1%
catalogue number(2)
last 5 digits(2)
last 5 digits
last 5 digits
lt = 30.0 mm; dt = 0.60 ±0.06 mm
47
0.4
2222 464 74709
.. 84709
.. 04709
.. 14709
51
0.4
2222 464 75109
.. 85109
.. 05109
.. 15109
56
0.4
2222 464 75609
.. 85609
.. 05609
.. 15609
62
0.4
2222 464 76209
.. 86209
.. 06209
.. 16209
68
0.4
2222 464 76809
.. 86809
.. 06809
.. 16809
75
0.4
2222 464 77509
.. 87509
.. 07509
.. 17509
82
0.4
2222 464 78209
.. 88209
.. 08209
.. 18209
91
0.4
2222 464 79109
.. 89109
.. 09109
.. 19109
100
0.4
2222 464 71001
.. 81001
.. 01001
.. 11001
110
0.4
2222 464 71101
.. 81101
.. 01101
.. 11101
120
0.4
2222 464 71201
.. 81201
.. 01201
.. 11201
130
0.5
2222 464 71301
.. 81301
.. 01301
.. 11301
0.4
2222 464 71501
.. 81501
.. 01501
.. 11501
0.4
2222 464 71601
.. 81601
.. 01601
.. 11601
180
0.5
2222 464 71801
.. 81801
.. 01801
.. 11801
200
0.5
2222 464 72001
.. 82001
.. 02001
.. 12001
220
0.6
2222 464 72201
.. 82201
.. 02201
.. 12201
240
0.6
2222 464 72401
.. 82401
.. 02401
.. 12401
270
0.6
2222 464 72701
.. 82701
.. 02701
.. 12701
300
0.7
2222 464 73001
.. 83001
.. 03001
.. 13001
330
0.4
2222 464 73301
.. 83301
.. 03301
.. 13301
360
0.4
2222 464 73601
.. 83601
.. 03601
.. 13601
390
0.5
2222 464 73901
.. 83901
.. 03901
.. 13901
430
0.5
2222 464 74301
.. 84301
.. 04301
.. 14301
470
0.5
2222 464 74701
.. 84701
.. 04701
.. 14701
510
0.5
2222 464 75101
.. 85101
.. 05101
.. 15101
560
0.5
2222 464 75601
.. 85601
.. 05601
.. 15601
150
160
5.0 × 11.0
Notes
1. In addition to the values of the E24 series as quoted, intermediate values are available of the E48 series (with a
tolerance of ±2% or ±1%) and the E96 series (with a tolerance of ±1%). The specifications of these intermediate
values are equal to the specifications of the next higher value of the E24 series.
2. The shading indicates preferred types.
1999 Apr 29
595
BC Components
Product specification
Polypropylene film foil capacitors
KP 464
KP 464 GENERAL DATA
7.2 max.
dmax
(1)
ltot
handbook, full pagewidth
≤1
≤1
Ød
ltot lmax
Ø1.3
lt
16.5
Ødt
lmax
lt
seating plane(2)
(1) ltot ≤ 13 mm for lmax = 11 mm.
ltot ≤ 16 mm for lmax = 15 mm.
(2) Hole ∅1.0.
5.08 +0.4
−0.2
Fig.8 Outlines.
CBA370
Specific reference data for the 630 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
C ≤ 1000 pF
1 000 pF < C ≤ 4700 pF
Rated voltage pulse slope (dU/dt)R at 630 V (DC)
R between leads; at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 1 kHz
at 100 kHz
at 1 MHz
≤5 × 10−4
≤5 × 10−4
−
≤15 × 10−4
10000 V/µs
>100000 MΩ
>100000 MΩ
1260 V; 1 minute
1260 V; 1 minute
≤10 × 10−4
−
Available 630 V DC versions
PACKAGING
Taped on reel; notes 1 and 2
Loose in box; note 1
Unidirectional; notes 1 and 2
C-tol
±1%
±2%
±5%
±1%
±2%
±5%
±1%
±2%
FIRST 8 DIGITS OF
CATALOGUE NUMBER
2222 464 8....
2222 464 7....
2222 464 6....
2222 464 4....
2222 464 3....
2222 464 2....
2222 464 1....
2222 464 0....
Available on request
PACKAGING
TAPE DISTANCE (mm)
52.5; note 2
63.5; note 2
52.5; note 2
Taped in ammopack
Taped on reel
Notes
1.
For SPQ refer to this handbook, chapter “Packaging information”.
2. For detailed specifications refer to this handbook, chapter “Packaging information”.
1999 Apr 29
596
ORDERING
preferred
preferred
on request
on request
on request
on request
on request
on request
BC Components
Product specification
Polypropylene film foil capacitors
KP464
URdc = 630 V; URac = 200 V
CATALOGUE NUMBER
C(1)
(E 24)
(pF)
DIMENSIONS
dmax × lmax
(mm)
TAPED ON REEL
MASS
(g)
TAPE DISTANCE 63.5 mm
C-tol = ±2%
C-tol = ±1%
catalogue number(2)
last 5 digits(2)
lt = 28.0 mm; dt = 0.60 ±0.06 mm
620
0.5
2222 464 76201
.. 86201
680
0.5
2222 464 76801
.. 86801
750
0.5
2222 464 77501
.. 87501
0.5
2222 464 78201
.. 88201
0.5
2222 464 79101
.. 89101
0.5
2222 464 71002
.. 81002
820
910
6.0 × 15.0
1000
1100
0.5
2222 464 71102
.. 81102
1200
0.5
2222 464 71202
.. 81202
1300
0.6
2222 464 71302
.. 81302
0.6
2222 464 71502
.. 81502
0.7
2222 464 71602
.. 81602
0.7
2222 464 71802
.. 81802
0.8
2222 464 72002
.. 82002
0.9
2222 464 72202
.. 82202
0.9
2222 464 72402
.. 82402
0.9
2222 464 72702
.. 82702
1.0
2222 464 73002
.. 83002
1.1
2222 464 73302
.. 83302
8.0 × 15.0
1.2
2222 464 73602
.. 83602
3900
1.3
2222 464 73902
.. 83902
4300
8.5 × 15.0
1.4
2222 464 74302
.. 84302
1.5
2222 464 74702
.. 84702
1500
1600
6.5 × 15.0
1800
2000
2200
7.0 × 15.0
2400
2700
3000
7.5 × 15.0
3300
3600
4700
Notes
1. In addition to the values of the E24 series as quoted, intermediate values are available of the E48 series (with a
tolerance of ±2% or ±1%) and the E96 series (with a tolerance of ±1%). The specifications of these intermediate
values are equal to the specifications of the next higher value of the E24 series.
2. The shading indicates preferred types.
1999 Apr 29
597
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
CONSTRUCTION
AND SHOCK
Description
The capacitors shall be mechanically fixed by the leads.
• Low-inductive wound cell of metal foil and a
polypropylene film
• Protected by a hard, water-repellent solvent-resistant
blue epoxy lacquer
• Axial iron leads, solder-coated.
handbook, halfpage
lead - tin foil
SOLDERING CONDITIONS
The capacitance stability is dependent on the maximum
temperature the capacitor reaches during soldering.
Figure 10 shows the typical effect of ∆C/C as a function of
soldering time under the worst possible mounting
conditions (horizontal on the PCB, minimum possible
pitch) and with 80 °C preheating.
Storage temperature
• Storage temperature: Tstg = −25 to +40 °C with RH
maximum 80% without condensation.
polypropylene film
connecting wire
CBA371
Fig.9 Construction.
RATINGS AND CHARACTERISTICS REFERENCE
CONDITIONS
NORMAL USE
Unless otherwise specified, all electrical values apply to an
ambient free air temperature of 23 ±1 °C, an atmospheric
pressure of 86 to 106 kPa and a relative humidity of
50 ±2%.
The capacitors are suitable for vertical or horizontal
mounting on printed-circuit boards. The capacitors packed
on bandoliers are designed for mounting on printed-circuit
boards by means of automatic insertion machines.
For reference testing, a conditioning period shall be
applied over 96 ±4 hours by heating the products in a
circulating air oven at the rated temperature and a relative
humidity not exceeding 20%.
Mounting
CBA372
0.4
handbook, full pagewidth
∆C
C
(%)
0
−0.4
−0.8
0
2
4
6
10
8
soldering time (s)
Fig.10 ∆C/C as a function of soldering time.
1999 Apr 29
598
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
CHARACTERISTICS
Capacitance
• Temperature coefficient:
– between −40 and +20 °C for C ≤ 1000 pF: −(125 ±125) × 10−6/K
– between −40 and +20 °C for C > 1000 pF: −(125 ±60) × 10−6/K
– between +20 and +100 °C: −(250 ±120) × 10−6/K.
CBA373
2
handbook, full pagewidth
∆C
C
(%)
max.
1
typical
0
min.
−1
−2
−3
−40
0
40
80
120
Tamb (°C)
Fig.11 Capacitance change at 1 kHz as a function of ambient temperature.
Maximum DC voltage as a function of temperature
CBA836
1.2
handbook, full pagewidth
factor
1.0
0.8
0.6
0.4
0.2
0
−60
−40
−20
0
20
40
60
80
100
Tamb (°C)
Fig.12 Multiplying factor for DC voltage as a function of temperature.
1999 Apr 29
599
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
Maximum RMS voltage (sinewave) as a function of frequency
CBA374
102
handbook, full pagewidth
AC voltage
(V)
10
68
00
0
62
00
22
pF
pF
0
00
pF
1
104
105
106
107
108
f (Hz)
Fig.13 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 63 V.
CBA896
102
handbook, full pagewidth
AC voltage
(V)
10
68
00
0
pF
00
62
0
00
22
pF
pF
1
104
105
106
107
f (Hz)
Fig.14 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 63 V.
1999 Apr 29
600
108
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
CBA375
102
handbook, full pagewidth
AC voltage
(V)
10
36
00
pF
0
00
10
0
00
pF
39
pF
1
104
105
106
107
f (Hz)
108
Fig.15 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 160 V.
CBA897
102
handbook, full pagewidth
AC voltage
(V)
10
00
36
pF
0
00
10
pF
0
00
39
pF
1
104
105
106
107
f (Hz)
108
Fig.16 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 160 V.
1999 Apr 29
601
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
CBA376
103
handbook, full pagewidth
AC voltage
(V)
102
10
24
00
pF
68
00
22
pF
00
0p
F
1
104
105
106
107
108
f (Hz)
Fig.17 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 250 V.
CBA898
103
handbook, full pagewidth
AC voltage
(V)
102
10
24
00
pF
68
00
22
pF
00
0p
F
1
104
105
106
107
f (Hz)
Fig.18 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 250 V.
1999 Apr 29
602
108
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
CBA377
103
handbook, full pagewidth
AC voltage
(V)
102
10
11
33 00 p
00 F
p
00
0p F
F
12
1
104
105
106
107
108
f (Hz)
Fig.19 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 400 V.
CBA904
103
handbook, full pagewidth
AC voltage
(V)
102
10
11
33 00 p
00 F
p
00
0p F
F
12
1
104
105
106
107
f (Hz)
Fig.20 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 400 V.
1999 Apr 29
603
108
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
CBA378
103
handbook, full pagewidth
AC voltage
(V)
102
47
20
pF
0p
10
F
10
00
pF
68
00
1
104
105
106
pF
107
108
f (Hz)
Fig.21 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 630 V.
CBA900
103
handbook, full pagewidth
AC voltage
(V)
102
47
20
10
pF
0p
F
10
00
pF
68
00
1
104
105
106
pF
107
f (Hz)
Fig.22 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 630 V.
Maximum RMS current (sinewave) as a function of frequency
The maximum RMS current is defined by I ac = ω × C × U ac .
Uac is the maximum AC voltage depending on the ambient temperature in Figs 13 to 22.
1999 Apr 29
604
108
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
Tangent of loss angle
CBA380
10
handbook, full pagewidth
dissipation
factor
(× 10−4)
1
0.1
102
10
103
104
105
106
f (Hz)
107
Fig.23 Tangent of loss angle as a function of frequency: typical curve.
Insulation resistance
CBA204
106
handbook, full pagewidth
RC
(s)
105
104
0
20
40
60
80
Tamb (°C)
Fig.24 RC product as a function of ambient free air temperature: typical curve.
Inductance
• L dependent on lead and capacitor length: ≤10 nH/cm.
1999 Apr 29
605
100
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)
CBA764
12
handbook, full pagewidth
∆T
(°C)
10
8
6
4
2
0
−60
−40
−20
0
20
40
60
100
80
Tamb (°C)
Fig.25 Maximum allowed component temperature rise as a function of the ambient temperature.
Heat conductivity (G) as a function of body dimensions in mW/°C
Table 1
Heat conductivity
dmax × lmax
(mm)
G
(mW/°C)
5.0 × 11.0
2.7
5.5 × 15.0
4.3
6.0 × 15.0
4.7
7.0 × 15.0
5.3
7.5 × 15.0
5.7
8.0 × 15.0
6.3
8.5 × 15.0
6.7
Power dissipation and maximum component temperature rise
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a
function of the free air ambient temperature.
Power dissipation can be calculated in accordance with chapter “Introduction”, section “Maximum power dissipation”.
The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more
details) or calculated by ∆T = P ⁄ G :
• ∆T = component temperature rise (°C).
• P = power dissipation of the component (mW).
• G = heat conductivity of the component (mW/°C).
1999 Apr 29
606
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
Measuring the component temperature
Application note and limiting conditions
A thermocouple must be attached to the capacitor body as
in Fig.26.
To select the capacitor for a certain application, the
following conditions must be checked:
1. The peak voltage (Up) shall not be greater than the
rated DC voltage (URdc).
2. The peak-to-peak voltage (Up-p) shall not be greater
than the maximum Up-p to avoid the ionisation
inception level.
thermocouple
handbook, halfpage
CBA765
3. The voltage pulse slope (dU/dt) shall not exceed the
rated voltage pulse slope in an RC-circuit at rated
voltage and without ringing. If the pulse voltage is
lower than the rated DC voltage, the rated voltage
pulse slope may be multiplied by URdc and divided by
the applied voltage.
For all other pulses following equation must be fulfilled:
T
dU
dU 2
2 × ∫  --------  × dt < U Rdc ×  -------- 
dt rated
dt
0
T is the pulse duration.
Fig.26 Mounting the thermocouple.
4. The maximum component surface temperature rise
must be lower than the limits in Fig.25.
The temperature is measured in unloaded (Tamb) and
maximum loaded condition (Tc).
5. The maximum component surface temperature must
be lower than 100 °C.
The temperature rise is given by ∆T = T c – T amb .
6. The capacitance drift is influenced by the soldering
conditions (see section “Soldering conditions” for more
details).
To avoid radiation or convection, the capacitor should be
tested in a wind-free box.
1999 Apr 29
607
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
MARKING EXAMPLE
MARKING
Product marking
8n2
The capacitors are marked in black ink with the following
information:
G 63
1. Rated capacitance code in accordance with
“IEC 60062”
PHILIPS
KPK2 (see Table 2)
2. Tolerance on rated
capacitance: F = ±1%; G ±2%; J = ±5%
3. Rated (DC) voltage (e.g. 63 V)
4. Code for dielectric material (KP)
5. Production date code in accordance with
“IEC 60062; clause 5”
6. Manufacturer.
Table 2
Letter codes for year and numbers for month of production
YEAR
LETTER CODE
1998
1999
1999 Apr 29
MONTH
CODE
K
January
1
L
February
2
2000
M
March
3
2001
N
April
4
2002
P
May
5
2003
R
June
6
2004
S
July
7
2005
T
August
8
2006
U
September
9
2007
V
October
O
2008
W
November
N
2009
X
December
D
608
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
Package marking
The package containing the capacitors is marked as shown in Fig.27.
Please note:
In due time BC COMPONENTS
will replace PHILIPS COMPONENTS
Barcode label marking
handbook, full pagewidth
1.
2.
LINE
MARKING EXPLANATION
3.
1
Manufacturer's name
4.
2
Country of origin
5.
3
Sub-family
4
Type description
5
Capacitance value, tolerance, voltage and
climatic category (“IEC 60068-1”)
6
−
7
Preference origin code: A
Country of origin in code: 170 (Belgium)
Responsible production centre: HQ
Work order: WO
8
Product type description
9
Quantity and production period, year and
week code
10
Product code (12NC)
6.
7.
8.
9.
10.
CCA346
Fig.27 Barcode label.
1999 Apr 29
609
BC Components
Product specification
Polypropylene film foil capacitors
KP 460 to 464
QUICK REFERENCE TEST REQUIREMENTS (see note 1)
TEST
PROCEDURE
(quick reference)
REQUIREMENTS
Robustness of leads
Tensile:
“IEC 60068-2-21”
Bending:
“IEC 60068-2-21”
Torsion:
Resistance to soldering heat:
“IEC 60068-2-20”
Component solvent resistance
load 10 N; 10 s
load 5 N; 4 × 90°
no visible damage
legible marking
2 × 180 °
solder bath: 260 °C; 5 s
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
isopropyl alcohol; 23 °C; 5 minutes
Robustness of component
Vibration:
“IEC 60068-2-6”
Shock:
“IEC 60068-2-27”
10 to 55 Hz; amplitude 0.75 mm or
acceleration 98 m/s2; 6 hours
half sinewave; 490 m/s2; 11 ms
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Rins ≥ 50% of specified value
Climatic sequence
Dry heat:
“IEC 60068-2-2”
Damp heat, cyclic, test Db,
first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1”
Damp heat, cyclic, test Db,
remaining cycles:
“IEC 60068-2-30”
16 hours; 100 °C
∆C/C ≤ 1% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
2 hours; −40 °C
Rins ≥ 50% of specified value
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3”
56 days; 40 °C; 90 to 95% RH
Endurance (DC):
“IEC 60384-13”
1000 hours;
1.5 × URdc; 85 °C
1.05 × URdc; 100 °C
Variation of capacitance with
temperature:
“IEC 60384-13”
static method; one cycle
Heat storage:
“IEC 60384-13”
Resistance to soldering heat with
preheating:
“IEC 60384-13”
1000 hours; 100 °C
body temperature: 100 °C;
bath temperature: 260 °C;
dwell time: 5 s
∆C/C ≤ 1% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Rins ≥ 50% of specified value
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Rins ≥ 100% of specified value
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Rins ≥ 10000 MΩ
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
∆C/C ≤ 2% +1 pF (C ≤ 1100 pF)
∆C/C ≤ 1% (C > 1100 pF)
Note
1. For detailed information: see “Type detail specification HQN-384-13/101”.
1999 Apr 29
610