BCcomponents DATA SHEET KP 460 to 464 Polypropylene film foil capacitors Product specification Supersedes data of April 1999 File under BCcomponents, BC05 2001 Jun 22 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 KP AXIAL EPOXY LACQUERED TYPE 296x12(full_width) CBA369 Fig.1 Simplified outlines. FEATURES • Supplied loose in box, taped on reel or unidirectional. QUICK REFERENCE DATA DESCRIPTION VALUE Capacitance range (E12 series) 47 to 62000 pF Capacitance tolerance ±5% (E24 series); ±2% (E24, E48 series); ±1% (E24, E48, E96 series) APPLICATIONS Rated (DC) voltage 63 V; 160 V; 250 V; 400 V; 630 V • In circuits where close tolerance, reliability and low losses are of prime importance, for example: tuned circuits, filter and timing networks. Rated (AC) voltage 40 V; 63 V; 125 V; 160 V; 200 V • Intermediate values are available of the E96 series. DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-13/101”. 2001 Jun 22 Climatic category 40/100/56 Rated temperature 85 °C Maximum application temperature 100 °C Reference specification IEC 60384-13 Stability class for: 63; 160; 250 V versions class 1 400; 630 V versions class 2 2 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 COMPOSITION OF CATALOGUE NUMBER TYPE AND VOLTAGES 460 63 V 461 160 V MULTIPLIER (nF) CAPACITANCE (numerically) 0.0001 9 0.001 1 0.01 2 0.1 3 Example: 1003 = 100 x 0.1 = 10 nF 2222 TYPE 460 461 PACKAGING taped on reel taped on reel 46. LEAD CONFIGURATION AND TAPE DISTANCE tape distance 63.5 mm X XXX X PREFERRED TYPES C-TOL 63 V ±1% 8 ±2% 7 160 V ±1% tape distance 63.5 mm 8 ±2% 7 ON REQUEST taped on reel 460 loose in box tape distance 63.5 mm lead length 30.0 or 28.0 mm unidirectional taped on reel 461 loose in box tape distance 63.5 mm lead length 30.0 or 28.0 mm unidirectional 2001 Jun 22 3 ±5% 6 ±1% 4 ±2% 3 ±5% 2 ±1% 1 ±2% 0 ±5% 6 ±1% 4 ±2% 3 ±5% 2 ±1% 1 ±2% 0 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 TYPE AND VOLTAGES 462 250 V MULTIPLIER (nF) 463 400 V 0.0001 9 630 V 0.001 1 0.01 2 0.1 3 464 CAPACITANCE (numerically) Example: 1003 = 100 x 0.1 = 10 nF 2222 TYPE PACKAGING 46. LEAD CONFIGURATION AND TAPE DISTANCE 462 taped on reel tape distance 63.5 mm 463 taped on reel tape distance 63.5 mm 464 taped on reel tape distance 63.5 mm taped on reel tape distance 63.5 mm loose in box lead length 30.0 or 28.0 mm 462 463 tape distance 63.5 mm loose in box lead length 30.0 or 28.0 mm unidirectional 464 taped on reel tape distance 63.5 mm loose in box lead length 30.0 or 28.0 mm unidirectional 2001 Jun 22 4 XXX X PREFERRED TYPES C-TOL ±1% ±2% ±1% ±2% ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% unidirectional taped on reel X 250 V 8 7 400 V 630 V 8 7 8 7 ON REQUEST 6 4 3 2 1 0 6 4 3 2 1 0 6 4 3 2 1 0 BCcomponents Product specification Polypropylene film foil capacitors KP 460 KP 460 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax lt 16.5 Ødt Ø1.3 lmax lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.4 Outlines. Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: 5000 pF < C ≤ 20000 pF 20000 pF < C ≤ 47000 pF C > 47000 pF Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads; at 10 V; 1 minute R between interconnected leads and case; 10 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case VALUE at 1 kHz ≤5 × 10−4 ≤5 × 10−4 ≤5 × 10−4 at 100 kHz ≤15 × 10−4 ≤25 × 10−4 ≤40 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 126 V; 1 minute 400 V; 1 minute Available 63 V DC versions PACKAGING C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% Taped on reel Loose in box Unidirectional FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 460 8.... 2222 460 7.... 2222 460 6.... 2222 460 4.... 2222 460 3.... 2222 460 2.... 2222 460 1.... 2222 460 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2001 Jun 22 5 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 460 URdc = 63 V; URac = 40 V CATALOGUE NUMBER C (E 24) (pF) DIMENSIONS dmax × lmax (mm) TAPED ON REEL MASS (g) UNIDIRECTIONAL TAPE DISTANCE 63.5 mm C-tol = ±2% C-tol = ±1% C-tol = ±2% C-tol = ±1% catalogue number last 5 digits last 5 digits last 5 digits lt = 30.0 mm; dt = 0.60 ±0.06 mm 6800 0.5 2222 460 76802 .. 86802 .. 06802 .. 16802 7500 0.5 2222 460 77502 .. 87502 .. 07502 .. 17502 0.6 2222 460 78202 .. 88202 .. 08202 .. 18202 0.6 2222 460 79102 .. 89102 .. 09102 .. 19102 10000 0.6 2222 460 71003 .. 81003 11000 0.6 2222 460 71103 .. 81103 12000 0.7 2222 460 71203 .. 81203 13000 0.8 2222 460 71303 .. 81303 0.7 2222 460 71503 .. 81503 − − 16000 0.7 2222 460 71603 .. 81603 18000 0.8 2222 460 71803 .. 81803 20000 0.8 2222 460 72003 .. 82003 22000 0.9 2222 460 72203 .. 82203 − − − − − − − − − − 8200 5.0 × 11.0 9100 lt = 28.0 mm; dt = 0.60 ±0.06 mm 15000 24000 27000 6.0 × 15.0 6.5 × 15.0 30000 33000 7.0 × 15.0 36000 39000 43000 47000 51000 56000 62000 2001 Jun 22 7.5 × 15.0 8.0 × 15.0 8.5 × 15.0 0.9 2222 460 72403 .. 82403 1.0 2222 460 72703 .. 82703 1.1 2222 460 73003 .. 83003 1.2 2222 460 73303 .. 83303 1.2 2222 460 73603 .. 83603 1.3 2222 460 73903 .. 83903 1.4 2222 460 74303 .. 84303 1.5 2222 460 74703 .. 84703 1.6 2222 460 75103 .. 85103 1.7 2222 460 75603 .. 85603 1.8 2222 460 76203 .. 86203 6 BCcomponents Product specification Polypropylene film foil capacitors KP 461 KP 461 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax lt 16.5 Ødt Ø1.3 lmax lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.5 Outlines. Specific reference data for the 160 V DC capacitors DESCRIPTION Tangent of loss angle: 1000 pF < C ≤ 5000 pF 5000 pF < C ≤ 20000 pF 20000 pF < C ≤ 39000 pF Rated voltage pulse slope (dU/dt)R at 160 V (DC) R between leads; at 100 V; 1 minute R between interconnected leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case VALUE at 1 kHz ≤5 × 10−4 ≤5 × 10−4 ≤5 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4 ≤25 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 320 V; 1 minute 400 V; 1 minute Available 160 V DC versions PACKAGING C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% Taped on reel Loose in box Unidirectional FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 461 8.... 2222 461 7.... 2222 461 6.... 2222 461 4.... 2222 461 3.... 2222 461 2.... 2222 461 1.... 2222 461 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2001 Jun 22 7 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 461 URdc = 160 V; URac = 63 V CATALOGUE NUMBER C (E 24) (pF) DIMENSIONS dmax × lmax (mm) TAPED ON REEL MASS (g) UNIDIRECTIONAL TAPE DISTANCE 63.5 mm C-tol = ±2% C-tol = ±1% C-tol = ±2% C-tol = ±1% catalogue number last 5 digits last 5 digits last 5 digits lt = 30.0 mm; dt = 0.60 ±0.06 mm 3600 0.5 2222 461 73602 .. 83602 .. 03602 .. 13602 3900 0.5 2222 461 73902 .. 83902 .. 03902 .. 13902 4300 0.5 2222 461 74302 .. 84302 .. 04302 .. 14302 0.5 2222 461 74702 .. 84702 .. 04702 .. 14702 5100 0.5 2222 461 75102 .. 85102 .. 05102 .. 15102 5600 0.5 2222 461 75602 .. 85602 .. 05602 .. 15602 6200 0.6 2222 461 76202 .. 86202 .. 06202 .. 16202 − − − − − − − − − − − − 4700 5.0 × 11.0 lt = 28.0 mm; dt = 0.60 ±0.06 mm 6800 0.4 2222 461 76802 .. 86802 7500 0.7 2222 461 77502 .. 87502 8200 0.6 2222 461 78202 .. 88202 9100 0.6 2222 461 79102 .. 89102 0.7 2222 461 71003 .. 81003 11000 0.7 2222 461 71103 .. 81103 12000 0.7 2222 461 71203 .. 81203 13000 0.8 2222 461 71303 .. 81303 15000 0.8 2222 461 71503 .. 81503 16000 0.9 2222 461 71603 .. 81603 0.9 2222 461 71803 .. 81803 1.0 2222 461 72003 .. 82003 1.1 2222 461 72203 .. 82203 1.1 2222 461 72403 .. 82403 1.2 2222 461 72703 .. 82703 1.3 2222 461 73003 .. 83003 1.4 2222 461 73303 .. 83303 1.5 2222 461 73603 .. 83603 1.6 2222 461 73903 .. 83903 10000 18000 6.0 × 15.0 6.5 × 15.0 20000 22000 24000 27000 30000 33000 36000 39000 2001 Jun 22 7.0 × 15.0 7.5 × 15.0 8.0 × 15.0 8.5 × 15.0 8 BCcomponents Product specification Polypropylene film foil capacitors KP 462 KP 462 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax lt 16.5 Ødt Ø1.3 lmax lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.6 Outlines. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: 1 000 pF < C ≤ 5000 pF 5 000 pF < C ≤ 20000 pF 20 000 pF < C ≤ 22000 pF Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads; at 100 V; 1 minute R between interconnected leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case VALUE at 1 kHz ≤5 × 10−4 ≤5 × 10−4 ≤5 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4 ≤25 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 500 V; 1 minute 500 V; 1 minute Available 250 V DC versions PACKAGING C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% Taped on reel Loose in box Unidirectional FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 462 8.... 2222 462 7.... 2222 462 6.... 2222 462 4.... 2222 462 3.... 2222 462 2.... 2222 462 1.... 2222 462 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2001 Jun 22 9 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 462 URdc = 250 V; URac = 125 V CATALOGUE NUMBER C (E 24) (pF) DIMENSIONS dmax × lmax (mm) TAPED ON REEL MASS (g) UNIDIRECTIONAL TAPE DISTANCE 63.5 mm C-tol = ±2% C-tol = ±1% C-tol = ±2% C-tol = ±1% catalogue number last 5 digits last 5 digits last 5 digits lt = 30.0 mm; dt = 0.60 ±0.06 mm 1200 0.5 2222 462 71202 .. 81202 .. 01202 .. 11202 1300 0.5 2222 462 71302 .. 81302 .. 01302 .. 11302 1500 0.4 2222 462 71502 .. 81502 .. 01502 .. 11502 1600 0.5 2222 462 71602 .. 81602 .. 01602 .. 11602 1800 0.6 2222 462 71802 .. 81802 .. 01802 .. 11802 0.6 2222 462 72002 .. 82002 .. 02002 .. 12002 2200 0.5 2222 462 72202 .. 82202 .. 02202 .. 12202 2400 0.5 2222 462 72402 .. 82402 .. 02402 .. 12402 2700 0.5 2222 462 72702 .. 82702 .. 02702 .. 12702 3000 0.5 2222 462 73002 .. 83002 .. 03002 .. 13002 3300 0.5 2222 462 73302 .. 83302 .. 03302 .. 13302 − − − − − − − − − − − − 2000 5.0 × 11.0 lt = 28.0 mm; dt = 0.60 ±0.06 mm 3600 0.5 2222 462 73602 .. 83602 3900 0.5 2222 462 73902 .. 83902 4300 0.6 2222 462 74302 .. 84302 4700 0.6 2222 462 74702 .. 84702 0.6 2222 462 75102 .. 85102 5600 0.6 2222 462 75602 .. 85602 6200 0.7 2222 462 76202 .. 86202 6800 0.7 2222 462 76802 .. 86802 7500 0.7 2222 462 77502 .. 87502 8200 0.8 2222 462 78202 .. 88202 0.8 2222 462 79102 .. 89102 0.9 2222 462 71003 .. 81003 5100 9100 6.0 × 15.0 6.5 × 15.0 10000 11000 12000 7.0 × 15.0 13000 15000 16000 18000 20000 22000 2001 Jun 22 7.5 × 15.0 8.0 × 15.0 8.5 × 15.0 0.9 2222 462 71103 .. 81103 1.0 2222 462 71203 .. 81203 1.0 2222 462 71303 .. 81303 1.1 2222 462 71503 .. 81503 1.2 2222 462 71603 .. 81603 1.3 2222 462 71803 .. 81803 1.4 2222 462 72003 .. 82003 1.5 2222 462 72203 .. 82203 10 BCcomponents Product specification Polypropylene film foil capacitors KP 463 KP 463 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax Ødt Ø1.3 lt lmax 16.5 lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.7 Outlines. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 1000 pF 1 000 pF < C ≤ 5000 pF Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads; at 100 V; 1 minute R between interconnected leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz ≤5 × 10−4 ≤5 × 10−4 VALUE at 100 kHz − ≤10 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 800 V; 1 minute 800 V; 1 minute at 1MHz(1) ≤10 × 10−4 − Note 1. For unidirectional capacitors ≤13 × 10−4. Available 400 V DC versions PACKAGING Taped on reel; notes Loose in box Unidirectional C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 463 8.... 2222 463 7.... 2222 463 6.... 2222 463 4.... 2222 463 3.... 2222 463 2.... 2222 463 1.... 2222 463 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2001 Jun 22 11 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 463 URdc = 400 V; URac = 160 V CATALOGUE NUMBER C (E 24) (pF) DIMENSIONS dmax × lmax (mm) TAPED ON REEL MASS (g) UNIDIRECTIONAL TAPE DISTANCE 63.5 mm C-tol = ±2% C-tol = ±1% C-tol = ±2% C-tol = 1% catalogue number last 5 digits last 5 digits last 5 digits lt = 30.0 mm; dt = 0.60 ±0.06 mm 620 0.5 2222 463 76201 .. 86201 .. 06201 .. 16201 680 0.5 2222 463 76801 .. 86801 .. 06801 .. 16801 750 0.5 2222 463 77501 .. 87501 .. 07501 .. 17501 0.5 2222 463 78201 .. 88201 .. 08201 .. 18201 910 0.5 2222 463 79101 .. 89101 .. 09101 .. 19101 1000 0.5 2222 463 71002 .. 81002 .. 01002 .. 11002 1100 0.5 2222 463 71102 .. 81102 .. 01102 .. 11102 − − − − − − − − − − − − 820 5.0 × 11.0 lt = 28.0 mm; dt = 0.60 ±0.06 mm 1200 0.5 2222 463 71202 .. 81202 1 300 0.5 2222 463 71302 .. 81302 1500 0.5 2222 463 71502 .. 81502 0.5 2222 463 71602 .. 81602 1600 6.0 × 15.0 1800 0.5 2222 463 71802 .. 81802 2000 0.5 2222 463 72002 .. 82002 2200 0.5 2222 463 72202 .. 82202 2400 0.5 2222 463 72402 .. 82402 0.6 2222 463 72702 .. 82702 3000 0.7 2222 463 73002 .. 83002 3300 0.7 2222 463 73302 .. 83302 0.7 2222 463 73602 .. 83602 3900 0.8 2222 463 73902 .. 83902 4300 0.8 2222 463 74302 .. 84302 0.9 2222 463 74702 .. 84702 0.9 2222 463 75102 .. 85102 1.0 2222 463 75602 .. 85602 1.0 2222 463 76202 .. 86202 2700 3600 4700 6.5 × 15.0 7.0 × 15.0 7.5 × 15.0 5100 5600 6200 8.0 × 15.0 6800 7500 8200 2001 Jun 22 8.5 × 15.0 1.1 2222 463 76802 .. 86802 1.2 2222 463 77502 .. 87502 1.3 2222 463 78202 .. 88202 12 BCcomponents Product specification Polypropylene film foil capacitors KP 464 KP 464 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax lt 16.5 Ødt Ø1.3 lmax lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.8 Outlines. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 560 pF Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads; at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case VALUE at 1 kHz ≤5 × 10−4 at 1 MHz(1) ≤10 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 1260 V; 1 minute 1260 V; 1 minute Note 1. For unidirectional capacitors ≤13 × 10−4. Available 630 V DC versions PACKAGING C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% Taped on reel Loose in box Unidirectional FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 464 8.... 2222 464 7.... 2222 464 6.... 2222 464 4.... 2222 464 3.... 2222 464 2.... 2222 464 1.... 2222 464 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2001 Jun 22 13 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 464 URdc = 630 V; URac = 200 V CATALOGUE NUMBER C (E 24) (pF) DIMENSIONS dmax × lmax (mm) TAPED ON REEL MASS (g) UNIDIRECTIONAL TAPE DISTANCE 63.5 mm C-tol = ±2% C-tol = ±1% C-tol = ±2% C-tol = ±1% catalogue number last 5 digits last 5 digits last 5 digits lt = 30.0 mm; dt = 0.60 ±0.06 mm 47 5.0 × 11.0 0.4 2222 464 74709 .. 84709 .. 04709 .. 14709 51 0.4 2222 464 75109 .. 85109 .. 05109 .. 15109 56 0.4 2222 464 75609 .. 85609 .. 05609 .. 15609 62 0.4 2222 464 76209 .. 86209 .. 06209 .. 16209 68 0.4 2222 464 76809 .. 86809 .. 06809 .. 16809 75 0.4 2222 464 77509 .. 87509 .. 07509 .. 17509 82 0.4 2222 464 78209 .. 88209 .. 08209 .. 18209 91 0.4 2222 464 79109 .. 89109 .. 09109 .. 19109 100 0.4 2222 464 71001 .. 81001 .. 01001 .. 11001 110 0.4 2222 464 71101 .. 81101 .. 01101 .. 11101 120 0.4 2222 464 71201 .. 81201 .. 01201 .. 11201 130 0.5 2222 464 71301 .. 81301 .. 01301 .. 11301 150 0.4 2222 464 71501 .. 81501 .. 01501 .. 11501 160 0.4 2222 464 71601 .. 81601 .. 01601 .. 11601 180 0.5 2222 464 71801 .. 81801 .. 01801 .. 11801 200 0.5 2222 464 72001 .. 82001 .. 02001 .. 12001 220 0.6 2222 464 72201 .. 82201 .. 02201 .. 12201 240 0.6 2222 464 72401 .. 82401 .. 02401 .. 12401 270 0.6 2222 464 72701 .. 82701 .. 02701 .. 12701 300 0.7 2222 464 73001 .. 83001 .. 03001 .. 13001 330 0.4 2222 464 73301 .. 83301 .. 03301 .. 13301 360 0.4 2222 464 73601 .. 83601 .. 03601 .. 13601 390 0.5 2222 464 73901 .. 83901 .. 03901 .. 13901 430 0.5 2222 464 74301 .. 84301 .. 04301 .. 14301 470 0.5 2222 464 74701 .. 84701 .. 04701 .. 14701 510 0.5 2222 464 75101 .. 85101 .. 05101 .. 15101 560 0.5 2222 464 75601 .. 85601 .. 05601 .. 15601 2001 Jun 22 14 BCcomponents Product specification Polypropylene film foil capacitors KP 464 KP 464 GENERAL DATA 7.2 max 296x12(full_width) dmax ltot (1) ≤1 ≤1 Ød ltot lmax Ødt Ø1.3 lt lmax 16.5 lt seating plane (2) 5.08+0.4 -0.2 Dimensions in mm. (1) ltot ≤ 13 mm for lmax = 11 mm ltot ≤ 16 mm for lmax = 15 mm. (2) Hole ∅1.0. CBA370 Fig.9 Outlines. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 1000 pF 1 000 pF < C ≤ 4700 pF Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads; at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz ≤5 × 10−4 ≤5 × 10−4 VALUE at 100 kHz − ≤15 × 10−4 10000 V/µs >100000 MΩ >100000 MΩ 1260 V; 1 minute 1260 V; 1 minute at 1 MHz ≤10 × 10−4 − Available 630 V DC versions PACKAGING C-tol ±1% ±2% ±5% ±1% ±2% ±5% ±1% ±2% Taped on reel Loose in box Unidirectional FIRST 8 DIGITS OF CATALOGUE NUMBER 2222 464 8.... 2222 464 7.... 2222 464 6.... 2222 464 4.... 2222 464 3.... 2222 464 2.... 2222 464 1.... 2222 464 0.... Available on request PACKAGING TAPE DISTANCE (mm) 52.5 63.5 52.5 Taped in ammopack Taped on reel 2001 Jun 22 15 ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 URdc = 630 V; URac = 200 V CATALOGUE NUMBER C (E 24) (pF) DIMENSIONS dmax × lmax (mm) TAPED ON REEL MASS (g) TAPE DISTANCE 63.5 mm C-tol = ±2% C-tol = ±1% catalogue number last 5 digits lt = 28.0 mm; dt = 0.60 ±0.06 mm 620 0.5 2222 464 76201 .. 86201 680 0.5 2222 464 76801 .. 86801 750 0.5 2222 464 77501 .. 87501 820 0.5 2222 464 78201 .. 88201 0.5 2222 464 79101 .. 89101 910 6.0 × 15.0 1000 0.5 2222 464 71002 .. 81002 1100 0.5 2222 464 71102 .. 81102 1200 0.5 2222 464 71202 .. 81202 1300 0.6 2222 464 71302 .. 81302 1500 0.6 2222 464 71502 .. 81502 0.7 2222 464 71602 .. 81602 1800 0.7 2222 464 71802 .. 81802 2000 0.8 2222 464 72002 .. 82002 1600 6.5 × 15.0 7.0 × 15.0 0.9 2222 464 72202 .. 82202 2400 0.9 2222 464 72402 .. 82402 2700 0.9 2222 464 72702 .. 82702 1.0 2222 464 73002 .. 83002 1.1 2222 464 73302 .. 83302 1.2 2222 464 73602 .. 83602 3900 1.3 2222 464 73902 .. 83902 4300 1.4 2222 464 74302 .. 84302 1.5 2222 464 74702 .. 84702 2200 3000 7.5 × 15.0 3300 3600 4700 2001 Jun 22 8.0 × 15.0 8.5 × 15.0 16 BCcomponents Product specification Polypropylene film foil capacitors CONSTRUCTION KP 460 to 464 SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK Description The capacitors shall be mechanically fixed by the leads. • Low-inductive wound cell of metal foil and a polypropylene film SOLDERING CONDITIONS • Protected by a hard, water-repellent solvent-resistant blue epoxy lacquer The capacitance stability is dependent on the maximum temperature the capacitor reaches during soldering. Figure 11 shows the typical effect of ∆C/C as a function of soldering time under the worst possible mounting conditions (horizontal on the PCB, minimum possible pitch) and with 80 °C preheating. • Axial iron leads, solder-coated. 144x12(halfpage) lead - tin foil Storage temperature • Storage temperature: Tstg = −25 to +40 °C with RH maximum 80% without condensation. polypropylene film connecting wire RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS CBA371 Fig.10 Construction. NORMAL USE Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. The capacitors are suitable for vertical or horizontal mounting on printed-circuit boards. The capacitors packed on bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. Mounting CBA372 296x12(full_width) 0.4 ∆C/C (%) 0 -0.4 -0.8 0 2 4 6 Fig.11 ∆C/C as a function of soldering time. 2001 Jun 22 17 8 soldering time (s) 10 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CHARACTERISTICS Capacitance • Temperature coefficient: – between −40 and +20 °C for C ≤ 1000 pF: −(125 ±125) × 10−6/K – between −40 and +20 °C for C > 1000 pF: −(125 ±60) × 10−6/K – between +20 and +100 °C: −(250 ±120) × 10−6/K. CBA373 2 296x12(full_width) ∆C/C (%) max. 1 typical 0 min. -1 -2 -3 -40 0 40 80 Tamb (°C) Fig.12 Capacitance change at 1 kHz as a function of ambient temperature. Maximum DC voltage as a function of temperature CBA836 1.2 296x12(full_width) factor 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (°C) Fig.13 Multiplying factor for DC voltage as a function of temperature. 2001 Jun 22 18 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Maximum RMS voltage (sinewave) as a function of frequency CBA374 296x12(full_width) 10 2 AC voltage (V) 10 1 68 00 pF 0 00 pF 22 0 00 62 10 0 10 4 10 5 10 6 pF 10 7 10 8 f (Hz) Fig.14 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 63 V. CBA896 296x12(full_width) 10 2 AC voltage (V) 10 1 68 00 pF 0 00 pF 22 0 00 62 10 0 10 4 10 5 pF 10 6 10 7 f (Hz) Fig.15 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 63 V. 2001 Jun 22 19 10 8 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CBA375 296x12(full_width) 10 2 AC voltage (V) 10 1 pF 00 pF 36 0 00 10 0 00 39 pF 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.16 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 160 V. CBA897 296x12(full_width) 10 2 AC voltage (V) 10 1 00 36 pF 00 0 10 pF 0 00 39 pF 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.17 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 160 V. 2001 Jun 22 20 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CBA376 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 24 00 pF 68 00 22 pF 00 0p F 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.18 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 250 V. CBA898 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 24 00 pF 68 00 22 pF 00 0p F 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.19 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 250 V. 2001 Jun 22 21 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CBA377 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 11 33 00 p 00 F p 00 0p F F 12 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.20 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 400 V. CBA904 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 11 33 00 p 00 F p 00 0p F F 12 10 0 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.21 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 400 V. 2001 Jun 22 22 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 CBA378 3 296x12(full_width) 10 AC voltage (V) 10 2 10 1 47 pF 20 0p F 10 00 pF 68 00 10 0 10 4 10 5 10 6 pF 10 7 f (Hz) 10 8 Fig.22 AC voltage (RMS value) as a function of frequency at Tamb ≤ 70 °C for URdc = 630 V. CBA900 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 47 pF 20 0p F 10 00 pF 68 00 10 0 10 4 10 5 10 6 pF 10 7 f (Hz) 10 8 Fig.23 AC voltage (RMS value) as a function of frequency at 70 °C < Tamb ≤ 100 °C for URdc = 630 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = ω × C × U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 14 to 23. 2001 Jun 22 23 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Tangent of loss angle CBA380 296x12(full_width) 10 dissipation factor (x 10-4) 1 0.1 10 1 10 2 10 4 10 3 10 5 10 6 f (Hz) 10 7 Fig.24 Tangent of loss angle as a function of frequency: typical curve. Insulation resistance CBA204 296x12(full_width) 10 6 RC (s) 10 5 10 4 0 20 40 60 Fig.25 RC product as a function of ambient free air temperature: typical curve. Inductance • L dependent on lead and capacitor length: ≤10 nH/cm. 2001 Jun 22 24 80 Tamb(°C) 100 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb) CBA764 12 296x12(full_width) ∆T (°C) 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (°C) Fig.26 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of body dimensions in mW/°C Table 1 Heat conductivity dmax × lmax (mm) G (mW/°C) 5.0 × 11.0 2.7 5.5 × 15.0 4.3 6.0 × 15.0 4.7 7.0 × 15.0 5.3 7.5 × 15.0 5.7 8.0 × 15.0 6.3 8.5 × 15.0 6.7 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according chapter “Introduction”, section “Maximum power dissipation”. The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more details) or calculated by ∆ T = P ⁄ G : • ∆T = component temperature rise (°C). • P = power dissipation of the component (mW). • G = heat conductivity of the component (mW/°C). 2001 Jun 22 25 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Measuring the component temperature Application note and limiting conditions A thermocouple must be attached to the capacitor body as in Fig.27. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 144x12(halfpage) 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. thermocouple CBA765 For all other pulses following equation must be fulfilled: Fig.27 Mounting the thermocouple. T dU dU 2 2 × ∫ -------- × dt < U Rdc × -------- dt dt rated 0 The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). T is the pulse duration. The temperature rise is given by ∆ T = T c – T amb . 4. The maximum component surface temperature rise must be lower than the limits in Fig.26. To avoid radiation or convection, the capacitor should be tested in a wind-free box. 5. The maximum component surface temperature must be lower than 100 °C. 6. The capacitance drift is influenced by the soldering conditions (see section “Soldering conditions” for more details). 2001 Jun 22 26 BCcomponents Product specification Polypropylene film foil capacitors MARKING KP 460 to 464 MARKING EXAMPLE Product marking 8n2 The capacitors are marked in black ink with the following information: G 63 1. Rated capacitance code in accordance with “IEC 60062” BC. KPK2 (see Table 2) 2. Tolerance on rated capacitance: F = ±1%; G ±2%; J = ±5% 3. Rated (DC) voltage (e.g. 63 V) 4. Code for dielectric material (KP) 5. Production date code in accordance with “IEC 60062; clause 5” 6. Manufacturer. Table 2 Letter codes for year and numbers for month of production 2001 Jun 22 YEAR LETTER CODE MONTH CODE 1998 K January 1 1999 L February 2 2000 M March 3 2001 N April 4 5 2002 P May 2003 R June 6 2004 S July 7 2005 T August 8 2006 U September 9 2007 V October O 2008 W November N 2009 X December D 27 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 Package marking The package containing the capacitors is marked as shown in Fig.28. Barcode label marking LINE 1 Manufacturer’s name 2 Country of origin 3 Sub-family 4 Type description 5 Capacitance value, tolerance, voltage and climatic category (“IEC 60068-1”) 6 − 7 Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) Fig.28 Barcode label. 2001 Jun 22 MARKING EXPLANATION 28 BCcomponents Product specification Polypropylene film foil capacitors KP 460 to 464 QUICK REFERENCE TEST REQUIREMENTS TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile: “IEC 60068-2-21” load 10 N; 10 s Bending: “IEC 60068-2-21” load 5 N; 4 × 90 ° no visible damage legible marking Torsion: 2 × 180 ° Resistance to soldering heat: “IEC 60068-2-20” solder bath: 260 °C; 5 s ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes Robustness of component Vibration: “IEC 60068-2-6” 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours Shock: “IEC 60068-2-27” half sinewave; 490 m/s2; 11 ms ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Rins ≥ 50% of specified value Climatic sequence Dry heat: “IEC 60068-2-2” 16 hours; 100 °C Damp heat, cyclic, test Db, first cycle: “IEC 60068-2-30” Cold: “IEC 60068-2-1” ∆C/C ≤ 1% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) 2 hours; −40 °C Rins ≥ 50% of specified value Damp heat, cyclic, test Db, remaining cycles: “IEC 60068-2-30” Other applicable tests Damp heat, steady state: “IEC 60068-2-3” 56 days; 40 °C; 90 to 95% RH Endurance (DC): “IEC 60384-13” 1000 hours; 1.5 × URdc; 85 °C 1.05 × URdc; 100 °C Variation of capacitance with temperature: “IEC 60384-13” static method; one cycle Heat storage: “IEC 60384-13” 1000 hours; 100 °C Resistance to soldering heat with preheating: “IEC 60384-13” body temperature: 100 °C; bath temperature: 260 °C; dwell time: 5 s ∆C/C ≤ 1% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Rins ≥ 50% of specified value 2001 Jun 22 ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Rins ≥ 100% of specified value ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) Rins ≥ 10000 MΩ 29 ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF) ∆C/C ≤ 2% +1 pF (C ≤ 1100 pF) ∆C/C ≤ 1% (C > 1100 pF)