Transistor 2SC1360, 2SC1360A Silicon NPN epitaxial planer type For intermadiate frequency amplification of TV image Unit: mm 5.9±0.2 4.9±0.2 High transition frequency fT. Large collector power dissipation PC. Parameter 0.7±0.1 2SC1360 base voltage 2SC1360A Collector to 2SC1360 emitter voltage 2SC1360A Ratings 50 VCBO Unit 45 V 60 +0.2 VEBO 4 V Collector current IC 50 mA Collector power dissipation PC 1 W Junction temperature Tj 150 ˚C Storage temperature Tstg –55 ~ +150 ˚C Collector to base 2SC1360 voltage 2SC1360A Collector to emitter 2SC1360 voltage 2SC1360A 0.45–0.1 1.27 1.27 1 2 3 1:Emitter 2:Collector 3:Base EIAJ:SC–51 TO–92L Package (Ta=25˚C) Symbol Collector cutoff current +0.2 0.45–0.1 Emitter to base voltage Parameter 2.54±0.15 V 60 VCEO ■ Electrical Characteristics +0.3 (Ta=25˚C) Symbol Collector to 0.7–0.2 ■ Absolute Maximum Ratings 13.5±0.5 ● 3.2 ● 8.6±0.2 ■ Features ICBO Conditions min VCB = 20V, IE = 0 IC = 100µA, IE = 0 VCEO IC = 1mA, IB = 0 Emitter to base voltage VEBO IE = 100µA, IC = 0 4 20 Forward current transfer ratio hFE VCB = 10V, IE = –10mA VCE(sat) IC = 20mA, IB = 2mA Transition frequency fT VCB = 10V, IE = –10mA, f = 100MHz Common emitter reverse transfer capacitance Cre VCE = 10V, IC = 1mA, f = 10.7MHz Power gain PG VCB = 10V, IE = –10mA, f = 58MHz max Unit 100 nA 50 VCBO Collector to emitter saturation voltage typ V 60 45 V 60 V 100 0.4 300 22 V MHz 1.5 pF 30 dB 1 2SC1360, 2SC1360A Transistor PC — Ta IC — VCE 1.2 IC — VBE 80 60 VCE=10V 0.8 0.6 0.4 60 1.6mA 50 1.4mA 1.2mA 40 1.0mA 30 0.8mA 0.6mA 20 0.4mA 0.2 10 0 40 60 80 100 120 140 160 2 4 10 3 1 Ta=75˚C 0.1 –25˚C 0.03 1 3 10 30 Ta=75˚C 60 25˚C –25˚C 40 20 0.3 1 3 10 30 10 200 100 –2.4 30 100 Collector to base voltage VCB (V) –3 –10 30 IC=1mA f=10.7MHz Ta=25˚C –2.0 –1 –30 –100 PG — IE –1.6 –1.2 – 0.4 0 2.0 Emitter current IE (mA) – 0.8 0.5 1.6 300 0 – 0.1 – 0.3 100 VCB=10V f=58MHz Ta=25˚C 25 Power gain PG (dB) Common emitter reverse transfer capacitance Cre (pF) Collector output capacitance Cob (pF) 1.0 1.2 400 Cre — VCE 1.5 0.8 500 Collector current IC (mA) 2.0 3 0.4 Base to emitter voltage VBE (V) VCB=10V Ta=25˚C 80 0 0.1 100 IE=0 f=1MHz Ta=25˚C 1 0 fT — I E 100 Cob — VCB 2.5 10 600 Collector current IC (mA) 3.0 8 VCE=10V Forward current transfer ratio hFE Collector to emitter saturation voltage VCE(sat) (V) 30 0.3 6 120 IC/IB=10 0.01 0.1 20 hFE — IC 100 25˚C 30 Collector to emitter voltage VCE (V) VCE(sat) — IC 0.3 40 0 0 Ambient temperature Ta (˚C) –25˚C 10 Transition frequency fT (MHz) 20 Ta=75˚C 0.2mA 0 0 2 50 Collector current IC (mA) IB=2.0mA 1.8mA 1.0 Collector current IC (mA) Collector power dissipation PC (W) 25˚C 70 20 15 10 5 0 1 3 10 30 100 Collector to emitter voltage VCE (V) 0 – 0.1 – 0.3 –1 –3 –10 –30 Emitter current IE (mA) –100 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR