Transistors 2SB0970 (2SB970) Silicon PNP epitaxial planar type For low-voltage output amplification Unit: mm 0.40+0.10 –0.05 ■ Features 0.16+0.10 –0.06 0.4±0.2 5˚ 1.50+0.25 –0.05 (0.95) (0.95) 1.9±0.1 (0.65) 2 1 ■ Absolute Maximum Ratings Ta = 25°C 2.8+0.2 –0.3 3 • Low collector-emitter saturation voltage VCE(sat) • Mini type package, allowing downsizing of the equipment and automatic insertion through the tape packing and the magazine packing 2.90+0.20 –0.05 Parameter Symbol Rating Unit Collector-base voltage (Emitter open) VCBO −15 V Collector-emitter voltage (Base open) VCEO −10 V Emitter-base voltage (Collector open) VEBO −7 V Collector current IC − 0.5 A Peak collector current ICP −1 A Collector power dissipation PC 200 mW Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C 1.1+0.2 –0.1 0 to 0.1 1.1+0.3 –0.1 10˚ 1: Base 2: Emitter 3: Collector EIAJ: SC-59 Mini3-G1 Package Marking Symbol: 1R ■ Electrical Characteristics Ta = 25°C ± 3°C Parameter Symbol Conditions Min Typ Max Unit Collector-base voltage (Emitter open) VCBO IC = −10 µA, IE = 0 −15 V Collector-emitter voltage (Base open) VCEO IC = −1 mA, IB = 0 −10 V Emitter-base voltage (Collector open) VEBO IE = −10 µA, IC = 0 −7 Collector-base cutoff current (Emitter open) ICBO VCB = −10 V, IE = 0 Forward current transfer ratio *1 hFE1 *2 hFE2 Collector-emitter saturation voltage *1 Base-emitter saturation voltage *1 Transition frequency 130 VCE = −2 V, IC = −1 A 60 nA 350 VCE(sat) IC = − 0.4 A, IB = −8 mA − 0.16 − 0.30 V VBE(sat) IC = − 0.4 A, IB = −8 mA − 0.8 V VCB = −10 V, IE = 50 mA, f = 200 MHz 130 MHz VCB = −10 V, IE = 0, f = 1 MHz 22 pF fT Collector output capacitance (Common base, input open circuited) VCE = −2 V, IC = − 0.5 A V −100 Cob −1.2 Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *1: Pulse measurement *2: Rank classification Rank R S hFE1 130 to 220 180 to 350 Note) The part number in the parenthesis shows conventional part number. Publication date: March 2003 SJC00063BED 1 2SB0970 IC VCE 200 −1.0 Ta = 25°C IB = −10 mA −9 mA −8 mA −7 mA −6 mA − 0.8 160 −5 mA − 0.6 120 −4 mA −3 mA − 0.4 80 −2 mA − 0.2 40 0 40 80 120 0 160 Ambient temperature Ta (°C) −1 mA −1 0 −2 Forward current transfer ratio hFE Collector-emitter saturation voltage VCE(sat) (V) −10 −1 Ta = 75°C 25°C −25°C − 0.01 − 0.01 − 0.1 −1 −10 Collector current IC (A) 400 300 Ta = 75°C 25°C −25°C 200 100 0 − 0.01 − 0.1 −1 Collector current IC (A) Collector output capacitance C (pF) (Common base, input open circuited) ob IE = 0 f = 1 MHz Ta = 25°C 60 40 20 −100 Collector-base voltage VCB (V) 2 SJC00063BED Ta = −25°C 75°C − 0.01 − 0.01 − 0.1 −1 −10 Collector current IC (A) fT I E 500 Cob VCB −10 −6 200 VCE = −2 V 80 0 −1 −5 25°C −1 hFE IC 600 IC / IB = 50 − 0.1 −4 −10 Collector-emitter voltage VCE (V) VCE(sat) IC −100 −3 IC / IB = 50 − 0.1 Transition frequency fT (MHz) 0 VBE(sat) IC −100 Base-emitter saturation voltage VBE(sat) (V) −1.2 Collector current IC (A) Collector power dissipation PC (mW) PC Ta 240 −10 VCB = −10 V Ta = 25°C 160 120 80 40 0 1 10 Emitter current IE (mA) 100 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL