FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L 4M–Word × 16–Bit or 8M–Word × 8–Bit Issue Date: May. 9, 2005 P2ROM FEATURES ·4,194,304-word × 16-bit / 8,388,608-word × 8-bit electrically switchable configuration · Access time 2.7 V to 3.6 V power supply 90 ns MAX 3.0 V to 3.6 V power supply 80 ns MAX · Operating current 20 mA MAX (5MHz) · Standby current 10 µA MAX · Input/Output TTL compatible · Three-state output PACKAGES · MR27T6402L-xxxMA 44-pin plastic SOP (SOP44-P-600-1.27-K) · MR27T6402L-xxxTN 48-pin plastic TSOP (TSOP I 48-P-1220-0.50-1K) PIN CONFIGURATION (TOP VIEW) A21 1 44 A20 A18 A17 2 43 A19 3 42 A8 A7 A6 4 41 A9 5 40 A10 A5 A4 6 39 A11 7 38 A12 A3 A2 8 37 A13 9 36 A14 A1 10 A0 11 35 A15 34 A16 CE# 12 VSS 13 33 BYTE# OE# 14 D0 15 31 D15/A–1 32 VSS 30 D7 D8 16 D1 17 29 D14 D9 18 D2 19 27 D13 D10 20 D3 21 D11 22 25 D12 28 D6 26 D5 24 D4 23 VCC 44SOP P2ROM ADVANCED TECHNOLOGY P2ROM stands for Production Programmed ROM. This exclusive Oki technology utilizes factory test equipment for programming the customers code into the P2ROM prior to final production testing. Advancements in this technology allows production costs to be equivalent to MASKROM and has many advantages and added benefits over the other non-volatile technologies, which include the following; · Short lead time, since the P2ROM is programmed at the final stage of the production process, a large P2ROM inventory "bank system" of un-programmed packaged products are maintained to provide an aggressive lead-time and minimize liability as a custom product. · No mask charge, since P2ROMs do not utilize a custom mask for storing customer code, no mask charges apply. · No additional programming charge, unlike Flash and OTP that require additional programming and handling costs, the P2ROM already has the code loaded at the factory with minimal effect on the production throughput. The cost is included in the unit price. · Custom Marking is available at no additional charge. · Pin Compatible with Mask ROM and some FLASH products. A15 1 48 A16 A14 A13 2 47 BYTE# 3 46 VSS A12 A11 4 45 D15/A–1 5 44 D7 A10 A9 6 43 D14 7 42 D6 A8 A19 8 41 D13 9 40 D5 A20 10 NC 11 39 D12 NC 12 A21 13 37 VCC NC 14 NC 15 35 D3 A18 16 A17 17 33 D2 A7 18 A6 19 31 D1 A5 20 A4 21 29 D0 A3 22 A2 23 27 VSS A1 24 25 A0 38 D4 36 D11 34 D10 32 D9 30 D8 28 OE# 26 CE# 48TSOP(Type-I) 1/10 FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L / P2ROM BLOCK DIAGRAM A–1 OE# CE OE BYTE# Row Decoder CE# Memory Cell Matrix 4M × 16-Bit or 8M × 8-Bit Column Decoder A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 Address Buffer × 8/× 16 Switch Multiplexer Output Buffer D0 D2 D1 D4 D3 D6 D5 D8 D7 D10 D9 D12 D11 D14 D13 D15 In 8-bit output mode, these pins are placed in a high-Z state and pin D15 functions as the A-1 address pin. PIN DESCRIPTIONS Pin name Functions D15 / A–1 Data output / Address input A0 to A21 Address inputs D0 to D14 Data outputs CE# Chip enable input OE# Output enable input BYTE# Word / Byte select input VCC Power supply voltage VSS Ground NC No connect 2/10 FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L / P2ROM FUNCTION TABLE Mode CE# OE# BYTE# Read (16-Bit) L L H Read (8-Bit) L L Output disable L H Standby H ∗ VCC D0 to D7 D8 to D14 D15/A–1 DOUT L DOUT Hi–Z 2.7 V to 3.6 V H L L/H Hi–Z H ∗ Hi–Z L ∗ ∗: Don’t Care (H or L) ABSOLUTE MAXIMUM RATINGS Parameter Symbol Operating temperature under bias Ta Storage temperature Condition — Tstg Input voltage VI Output voltage VO Power supply voltage VCC relative to VSS Value Unit 0 to 70 °C –55 to 125 °C –0.5 to VCC+0.5 V –0.5 to VCC+0.5 V –0.5 to 5 V Power dissipation per package PD Ta = 25°C 1.0 W Output short circuit current IOS — 10 mA RECOMMENDED OPERATING CONDITIONS (Ta = 0 to 70°C) Parameter Symbol VCC power supply voltage VCC Input “H” level VIH Input “L” level VIL Condition Min. Typ. Max. Unit 2.7 — 3.6 V 2.2 — VCC+0.5∗ V –0.5∗∗ — 0.6 V VCC = 2.7 to 3.6 V Voltage is relative to VSS. ∗ : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. ∗∗ : -1.5V(Min.) when pulse width of undershoot is less than 10ns. PIN CAPACITANCE (VCC = 3.0 V, Ta = 25°C, f = 1 MHz) Parameter Symbol Input CIN1 BYTE# CIN2 Output COUT Condition VI = 0 V VO = 0 V Min. Typ. Max. — — 12 — — 200 — — 12 Unit pF 3/10 FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L / P2ROM ELECTRICAL CHARACTERISTICS DC Characteristics (VCC = 2.7 V to 3.6 V, Ta = 0 to 70°C) Symbol Condition Min. Typ. Max. Unit Input leakage current Parameter ILI VI = 0 to VCC — — 10 µA Output leakage current ILO VO = 0 to VCC — — 10 µA VCC power supply current ICCSC CE# = VCC — — 10 µA (Standby) ICCST CE# = VIH — — 1 mA — — 20 mA — 2.2 — VCC+0.5∗ V VCC power supply current (Read) Input “H” level ICCA VIH CE# = VIL, OE# = VIH f=5MHz Input “L” level VIL — –0.5∗∗ — 0.6 V Output “H” level VOH IOH = –1 mA 2.4 — — V Output “L” level VOL IOL = 2 mA — — 0.4 V Voltage is relative to VSS. ∗ : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. ∗∗ : -1.5V(Min.) when pulse width of undershoot is less than 10ns. 4/10 FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L / P2ROM AC Characteristics (VCC = 2.7 V to 3.6 V, Ta = 0 to 70°C) Parameter Symbol Condition Min. Max. Unit tC — 90 — ns Address access time tACC CE# = OE# = VIL — 90 ns CE# access time tCE OE# = VIL — 90 ns OE# access time tOE CE# = VIL — 30 ns tCHZ OE# = VIL 0 30 ns tOHZ CE# = VIL 0 25 ns tOH CE# = OE# = VIL 0 — ns Address cycle time Output disable time Output hold time (VCC = 3.0 V to 3.6 V, Ta = 0 to 70°C) Parameter Symbol Condition Min. Max. Unit tC — 80 — ns Address access time tACC CE# = OE# = VIL — 80 ns CE# access time tCE OE# = VIL — 80 ns OE# access time tOE CE# = VIL — 30 ns tCHZ OE# = VIL 0 20 ns tOHZ CE# = VIL 0 20 ns tOH CE# = OE# = VIL 0 — ns Address cycle time Output disable time Output hold time Measurement conditions Input signal level ------------------------------------ 0 V/3 V Input timing reference level ----------------------- 1/2Vcc Output load ------------------------------------------- 50 pF Output timing reference level ------------------- 1/2Vcc Output load Output 50 pF (Including scope and jig) 5/10 FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L / P2ROM TIMING CHART (READ CYCLE) 16-BIT READ MODE (BYTE# = VIH) tC tC A0 to A21 tOH tACC tCE CE# tOE tCHZ tOH OE# tOHZ tACC D0 to D15 Valid Data Hi-Z Valid Data Hi-Z 8-BIT READ MODE (BYTE# = VIL) tC tC A-1 to A21 tOH tACC tCE CE# tOE tCHZ tOH OE# tOHZ tACC D0 to D7 Hi-Z Valid Data Valid Data Hi-Z 6/10 FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L / P2ROM PACKAGE DIMENSIONS (Unit: mm) SOP44-P-600-1.27-K Mirror finish 5 Package material Lead frame material Pin treatment Package weight (g) Rev. No./Last Revised Epoxy resin 42 alloy Solder plating (≥5µm) 2.10 TYP. 4/Dec. 5, 1996 Notes for Mounting the Surface Mount Type Package The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki’s responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 7/10 FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L / P2ROM (Unit: mm) TSOP(1)48-P-1220-0.50-1K Mirror finish 5 Package material Lead frame material Pin treatment Package weight (g) Rev. No./Last Revised Epoxy resin 42 alloy Solder plating (≥5µm) 0.55 TYP. 1/Dec. 2, 1999 Notes for Mounting the Surface Mount Type Package The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki’s responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 8/10 FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L / P2ROM REVISION HISTORY Document No. FEDR27T6402L-02-01 Page Date Previous Edition Current Edition May. 9, 2005 – – Description Final edition 1 9/10 FEDR27T6402L-02-01 OKI Semiconductor MR27T6402L / P2ROM NOTICE 1. The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-to-date. 2. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. 3. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. 4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. 5. Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party’s right which may result from the use thereof. 6. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. 7. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. 8. No part of the contents contained herein may be reprinted or reproduced without our prior permission. Copyright 2005 Oki Electric Industry Co., Ltd. 10/10