SENSITRON SHD114211B

SHD114211
SHD114211A
SHD114211B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1047, REV. -
POWER SCHOTTKY RECTIFIER
Very Low Voltage Drop
(S-100 for JANTXV equivalent screening; SS for JANS equivalent screening available)
DESCRIPTION: A 30 VOLT, 15 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-3/3A/3B PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C)
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
SYMBOL
MAX.
UNITS
PIV
30
Volts
IO
15
Amps
IFSM
280
Amps
CT
1100
pF
0.85
•C/W
Top/Tstg
-65 to
+ 150
•C
SYMBOL
MAX.
UNITS
Vf
0.49
Volts
(t=8.3ms, Sine)
MAXIMUM JUNCTION CAPACITANCE
(Vr =5V)
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
R
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps)
TJ = 25 •C
TJ = 125 •C
MAXIMUM REVERSE CURRENT (Ir @ 30V PIV)
TJ = 25 •C
TJ = 125 •C
Ir
0.39
2.0
100
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - [email protected]
mA
SHD114211
SHD114211A
SHD114211B
SENSITRON
DATA SHEET 1047, REV. -
MECHANICAL DIMENSIONS: In Inches / mm
.560±.020
.550±.020
(14.0±.508)
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
(10.4±.254)
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
.075 (1.91) Max
(14.2±.508)
.410±.010
.200±.010
(5.08 ±.254)
Moly Lid
.150±.010
(3.81±.254)
.410±.010
(10.4±.254)
.015±.005
(.381±.127)
Copper Anode
.020±.005 R
(.508±.127 )
.020±.005 R
.090 (2.29) Max
Alumina Ring
Moly Lid
(.508±.127 )
Alumina Ring
Alumina Ring
.020±.002
(.508±.051)
Moly Base
(Cathode)
SHD-3
.015±.002
(.381±.051)
Moly Base
.060±.010
(1.52±.254)
Moly Anode
Moly Base
(Cathode)
.060±.010
SHD-3A
PINOUT TABLE
TYPE
SINGLE RECTIFIER
PIN 1 (Base)
CATHODE
Typical Forward Characteristics
Instantaneous Reverse Current - I R (mA)
102
101
Instantaneous Forward Current - I F (A)
PIN 2
ANODE
Typical Reverse Characteristics
150 °C
150 °C
125 °C
1
10
100 °C
100
75 °C
50 °C
10-1
25 °C
10-2
125 °C
100
0
10
0.0
0.1
0.2
0.3
0.4
0.5
Forward Voltage Drop - VF (V)
10
20
30
Reverse Voltage - VR (V)
40
Typical Junction Capacitance
25 °C
-1
0.6
(1.52±.254)
SHD-3B
Junction Capacitance - CT (pF)
.075 (1.91) Max
1000
900
800
700
600
0
10
20
30
Reverse Voltage - VR (V)
40
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - [email protected]
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]