NJT4031N Preferred Device Bipolar Power Transistors NPN Silicon Features •Collector -Emitter Sustaining Voltage - http://onsemi.com VCEO(sus) = 40 Vdc (Min) @ IC = 10 mAdc •High DC Current Gain = 200 (Min) @ IC = 1.0 Adc hFE = 100 (Min) @ IC = 3.0 Adc •Low Collector -Emitter Saturation Voltage VCE(sat) = 0.150 Vdc (Max) @ IC = 1.0 Adc = 0.300 Vdc (Max) @ IC = 3.0 Adc •SOT-223 Surface Mount Packaging •Epoxy Meets UL 94, V-0 @ 0.125 in •ESD Ratings: Human Body Model, 3B; > 8000 V Machine Model, C; > 400 V •These are Pb-Free Devices NPN TRANSISTOR 3.0 AMPERES 40 VOLTS, 2.0 WATTS C 2,4 B1 E3 Schematic MARKING DIAGRAM SOT-223 CASE 318E STYLE 1 AYW 4031NG 1 A Y W 4031N G = Assembly Location Year = Work Week = Specific Device Code = Pb-Free Package PIN ASSIGNMENT 4 C B C E 1 2 3 Top View Pinout ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value. © Semiconductor Components Industries, LLC, 2007 August, 2007 - Rev. 0 1 Publication Order Number: NJT4031N/D NJT4031N ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎ MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Rating Symbol Value Unit VCEO 40 Vdc Collector-Base Voltage VCB 40 Vdc Emitter-Base Voltage VEB 6.0 Vdc Base Current - Continuous IB 1.0 Adc Collector Current - Continuous Collector Current - Peak IC 3.0 5.0 Adc Total Power Dissipation Total PD @ TA = 25°C mounted on 1” sq. (645 sq. mm) Collector pad on FR-4 bd material Total PD @ TA = 25°C mounted on 0.012” sq. (7.6 sq. mm) Collector pad on FR-4 bd material PD Collector-Emitter Voltage Operating and Storage Junction Temperature Range W 2.0 0.80 TJ, Tstg –55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction-to-Case - Junction-to-Ambient on 1” sq. (645 sq. mm) Collector pad on FR-4 bd material - Junction-to-Ambient on 0.012” sq. (7.6 sq. mm) Collector pad on FR-4 bd material Maximum Lead Temperature for Soldering Purposes, 1/8” from case for 5 seconds Symbol Max RqJA RqJA 64 155 TL 260 Unit °C/W °C ORDERING INFORMATION Package Shipping† NJT4031NT1G SOT-223 (Pb-Free) 1000 / Tape & Reel NJT4031NT3G SOT-223 (Pb-Free) 4000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 NJT4031N ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (IC = 10 mAdc, IB = 0 Adc) VCEO(sus) Vdc 40 Emitter-Base Voltage (IE = 50 mAdc, IC = 0 Adc) VEBO Collector Cutoff Current (VCB = 40 Vdc) ICBO Emitter Cutoff Current (VBE = 6.0 Vdc) IEBO Vdc 6.0 nAdc 100 nAdc 100 ON CHARACTERISTICS (Note 1) Collector-Emitter Saturation Voltage (IC = 0.5 Adc, IB = 5.0 mAdc) (IC = 1.0 Adc, IB = 10 mAdc) (IC = 3.0 Adc, IB = 0.3 Adc) VCE(sat) Base-Emitter Saturation Voltage (IC = 1.0 Adc, IB = 0.1 Adc) VBE(sat) Base-Emitter On Voltage (IC = 1.0 Adc, VCE = 2.0 Vdc) VBE(on) DC Current Gain (IC = 0.5 Adc, VCE = 1.0 Vdc) (IC = 1.0 Adc, VCE = 1.0 Vdc) (IC = 3.0 Adc, VCE = 1.0 Vdc) hFE Vdc 0.100 0.150 0.300 Vdc 1.0 Vdc 1.0 220 200 100 500 DYNAMIC CHARACTERISTICS Output Capacitance (VCB = 10 Vdc, f = 1.0 MHz) Cob Input Capacitance (VEB = 5.0 Vdc, f = 1.0 MHz) Cib Current-Gain - Bandwidth Product (Note 2) (IC = 500 mA, VCE = 10 V, Ftest = 1.0 MHz) fT pF 25 pF 170 MHz 215 1. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%. 2. fT = |hFE| • ftest PD, POWER DISSIPATION (W) 2.5 2.0 TC 1.5 1.0 TA 0.5 0 25 50 75 100 TJ, TEMPERATURE (°C) Figure 1. Power Derating http://onsemi.com 3 125 150 NJT4031N TYPICAL CHARACTERISTICS 600 700 VCE = 4 V 400 25°C 300 200 -55°C 100 500 25°C 400 300 -55°C 200 100 0 0.001 0.01 0.1 1 0 0.001 10 0.1 1 IC, COLLECTOR CURRENT (A) Figure 2. DC Current Gain Figure 3. DC Current Gain 10 1 IC/IB = 10 VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) 150°C 25°C 0.1 -55°C 0.01 0.001 IC/IB = 50 150°C 25°C 0.1 -55°C 0.01 0.001 0.01 0.1 1 10 0.001 IC, COLLECTOR CURRENT (A) VBE(on), EMITTER-BASE VOLTAGE (V) IC = 3 A 2A 0.1 1A 0.5 A 0.1 A 0.001 0.01 0.1 1 10 Figure 5. Collector-Emitter Saturation Voltage 1 0.01 0.0001 0.01 IC, COLLECTOR CURRENT (A) Figure 4. Collector-Emitter Saturation Voltage VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) 0.01 IC, COLLECTOR CURRENT (A) 1 VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) 150°C 600 150°C 500 hFE, DC CURRENT GAIN hFE, DC CURRENT GAIN VCE = 1 V 0.1 1.0 1.2 VCE = 2 V 1.0 -55°C 0.8 0.6 25°C 0.4 0.2 0 0.001 150°C 0.01 0.1 1 IB, BASE CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 6. Collector Saturation Region Figure 7. VBE(on) Voltage http://onsemi.com 4 10 NJT4031N TYPICAL CHARACTERISTICS 1.4 IC/IB = 10 1.2 VBE(sat), EMITTER-BASE SATURATION VOLTAGE (V) VBE(sat), EMITTER-BASE SATURATION VOLTAGE (V) 1.4 1.0 -55°C 0.8 0.6 25°C 0.4 150°C 0.2 0 IC/IB = 50 1.2 1.0 -55°C 0.8 0.6 25°C 0.4 150°C 0.2 0 0.001 0.01 0.1 1 10 0.001 0.01 Figure 8. Base-Emitter Saturation Voltage 10 Figure 9. Base-Emitter Saturation Voltage 450 100 TJ = 25°C ftest = 1 MHz 400 Cobo, OUTPUT CAPACITANCE (pF) Cibo, INPUT CAPACITANCE (pF) 1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) 350 300 250 200 150 100 50 0 TJ = 25°C ftest = 1 MHz 80 60 40 20 0 0 1 2 3 4 5 6 7 8 0 20 30 40 50 60 70 VCB, COLLECTOR BASE VOLTAGE (V) Figure 10. Input Capacitance Figure 11. Output Capacitance 80 90 10 TJ = 25°C ftest = 1 MHz VCE = 10 V IC, COLLECTOR CURRENT (A) 200 10 VEB, EMITTER BASE VOLTAGE (V) 240 fTau, CURRENT BANDWIDTH PRODUCT (MHz) 0.1 160 120 80 40 0 0.001 0.5 ms 1 ms 1 10 ms 100 ms 0.1 0.01 0.01 0.1 1 10 1 IC, COLLECTOR CURRENT (A) 10 VCE, COLLECTOR-EMITTER VOLTAGE (V) Figure 12. Current-Gain Bandwidth Product Figure 13. Safe Operating Area http://onsemi.com 5 100 NJT4031N PACKAGE DIMENSIONS SOT-223 (TO-261) CASE 318E-04 ISSUE L NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. D b1 4 HE E 1 2 3 b e1 e 0.08 (0003) C q A A1 DIM A A1 b b1 c D E e e1 L1 HE q MIN 1.50 0.02 0.60 2.90 0.24 6.30 3.30 2.20 0.85 1.50 6.70 0° MILLIMETERS NOM MAX 1.63 1.75 0.06 0.10 0.75 0.89 3.06 3.20 0.29 0.35 6.50 6.70 3.50 3.70 2.30 2.40 0.94 1.05 1.75 2.00 7.00 7.30 10° - MIN 0.060 0.001 0.024 0.115 0.009 0.249 0.130 0.087 0.033 0.060 0.264 0° INCHES NOM 0.064 0.002 0.030 0.121 0.012 0.256 0.138 0.091 0.037 0.069 0.276 - MAX 0.068 0.004 0.035 0.126 0.014 0.263 0.145 0.094 0.041 0.078 0.287 10° L1 SOLDERING FOOTPRINT* 3.8 0.15 2.0 0.079 2.3 0.091 2.3 0.091 6.3 0.248 2.0 0.079 1.5 0.059 SCALE 6:1 mm Ǔ ǒinches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P .O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NJT4031N/D