VISHAY SE07PB

New Product
SE07PB thru SE07PJ
Vishay General Semiconductor
Surface Mount ESD Capability Rectifiers
FEATURES
eSMP ® Series
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Oxide planar chip junction
• Low forward voltage drop
• Typical IR less than 0.1 μA
• ESD capability
DO-220AA (SMP)
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
PRIMARY CHARACTERISTICS
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
IF(AV)
0.7 A
VRRM
100 V to 600 V
IR
5 μA
VF at IF = 1.0 A
0.865 V
TJ max.
175 °C
• Halogen-free according to IEC 61249-2-21 definition
MECHANICAL DATA
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
TYPICAL APPLICATIONS
General purpose, polarity protection, and rail-to-rail
protection in both consumer and automotive applications.
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
SE07PB
SE07PD
SE07PG
SE07PJ
07B
07D
07G
07J
100
200
400
600
UNIT
Maximum repetitive peak reverse voltage
VRRM
Average forward current
IF(AV)
1.0
A
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
IFSM
20
A
TJ, TSTG
- 55 to + 175
°C
Operating junction and storage temperature range
Document Number: 89023
Revision: 19-Apr-11
V
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SE07PB thru SE07PJ
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous
forward voltage
IF = 0.7 A
Maximum reverse current
Rated VR
Typical junction capacitance
SYMBOL
TA = 25 °C
VF (1)
TA = 125 °C
TA = 25 °C
4.0 V, 1 MHz
MAX.
0.965
1.05
0.865
0.95
-
5.0
3.7
50
5.0
-
UNIT
V
IR (2)
TA = 125 °C
TYP.
μA
CJ
pF
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted)
PARAMETER
SYMBOL
RJA
Typical thermal resistance
SE07PB
SE07PD
(1)
SE07PG
UNIT
105
RJL (1)
25
(1)
30
RJC
SE07PJ
°C/W
Note
Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0 mm x 5.0 mm copper pad areas. RJL - is
measured at the terminal of cathode band. RJC is measured at the top center of the body.
(1)
IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS
(TA = 25 °C unless otherwise noted)
STANDARD
TEST TYPE
TEST CONDITIONS
SYMBOL
CLASS
VALUE
AEC-Q101-001
Human body model (contact mode)
C = 100 pF, R = 1.5 
H3B
> 8 kV
AEC-Q101-002
Machine model (contact mode)
C = 200 pF, R = 0 
M4
> 400 kV
JESD22-A114
Human body model (contact mode)
C = 150 pF, R = 1.5 
3B
> 8 kV
C
> 400 kV
C = 150 pF, R = 150 
4
> 8 kV
C = 150 pF, R = 150 
4
> 15 kV
JESD22-A114
IEC 61000-4-2 (2)
C = 200 pF, R = 0 
Machine model (contact mode)
Human body model (contact mode)
Human body model (air-discharge mode)
(1)
VC
Notes
Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 30 kV
(2) System ESD standard
(1)
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
SE07PJ-M3/84A
0.024
84A
3000
7" diameter plastic tape and reel
SE07PJ-M3/85A
0.024
85A
10 000
13" diameter plastic tape and reel
www.vishay.com
2
BASE QUANTITY
DELIVERY MODE
For technical questions within your region, please contact one of the following:
Document Number: 89023
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SE07PB thru SE07PJ
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 C unless otherwise noted)
100
0.8
Instantaneous Reverse Current (µA)
Average Forward Current (A)
Resistive or Inductive Load
0.7
0.6
0.5
0.4
0.3
0.2
TL Measured
at the Cathode Band Terminal
0.1
10
TJ = 150 °C
1
0.1
TJ = 25 °C
0.01
0
0
25
50
75
100
125
150
10
175
20
30
40
50
60
70
80
90
100
Lead Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Leakage Characteristics
100
0.9
D = 0.5 D = 0.8
0.8
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
D = 0.3
0.7
D = 0.2
D = 0.1
0.6
D = 1.0
0.5
0.4
T
0.3
0.2
D = tp/T
0.1
Junction Capacitance (pF)
Average Power Loss (W)
TJ = 175 °C
10
tp
1
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.1
1
10
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
100
Instantaneous Forward Current (A)
10
TJ = 175 °C
TJ = 150 °C
1
TJ = 25 °C
0.1
0.6
0.8
1.0
1.2
1.4
1.6
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Document Number: 89023
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SE07PB thru SE07PJ
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-220AA (SMP)
0.012 (0.30) REF.
Cathode Band
0.053 (1.35)
0.041 (1.05)
0.086 (2.18)
0.074 (1.88)
0.142 (3.61)
0.126 (3.19)
0.036 (0.91)
0.024 (0.61)
0.032 (0.80)
0.016 (0.40)
0.103 (2.60)
0.087 (2.20)
0.158 (4.00)
0.146 (3.70)
0.105
(2.67)
0.013 (0.35)
0.004 (0.10)
0.045 (1.15)
0.033 (0.85)
0.012 (0.30) 0.018 (0.45)
0.000 (0.00) 0.006 (0.15)
www.vishay.com
4
0.025 0.030
(0.635) (0.762)
0.100
(2.54)
0.050
(1.27)
For technical questions within your region, please contact one of the following:
Document Number: 89023
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1