VSUD360CW40 Vishay Semiconductors FRED Pt® Ultrafast Soft Recovery Diode Module, 360 A FEATURES • Very low Qrr and trr • Compliant to RoHS directive 2002/95/EC • Designed and qualified for industrial level BENEFITS • Reduced RFI and EMI • Higher frequency operation TO-244 • Reduced snubbing PRODUCT SUMMARY DESCRIPTION IF(AV) 360 A VR 400 V Qrr (typical) 1250 nC trr 40 ns Type Modules - Diode, FRED Pt® FRED Pt® diodes are optimized to reduce losses and EMI/RFI in high frequency power conditioning systems. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for HF welding, power converters and other applications where switching losses are a significant portion of the total losses. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Cathode to anode voltage TEST CONDITIONS VR Continuous forward current per diode Single pulse forward current per diode Maximum power dissipation Operating junction and storage temperatures IF(AV) UNITS 400 V TC = 25 °C 510 TC = 85 °C 305 TC = 116 °C 180 IFSM PD MAX. A 1200 TC = 25 °C 570 TC = 110 °C 180 TJ, TStg W - 40 to 150 °C ELECTRICAL SPECIFICATIONS PER LEG (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage Forward voltage SYMBOL VBR VFM TEST CONDITIONS MIN. TYP. MAX. 400 - - IF = 180 A - 1.09 1.27 IF = 360 A - 1.23 1.50 IF = 180 A, TJ = 175 °C - 0.88 0.96 IF = 360 A, TJ = 175 °C - 1.04 1.18 IR = 100 μA UNITS V Reverse leakage current IRM TJ = 150 °C, VR = VR rated - 0.26 1.28 mA Series inductance LS From top of terminal hole to mounting plane - 5 - nH Document Number: 93116 Revision: 20-Sep-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 VSUD360CW40 Vishay Semiconductors FRED Pt® Ultrafast Soft Recovery Diode Module, 360 A DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. - 40 69 - 74 - - 171 - IF = 1.0 A, dIF/dt = 200 A/μs, VR = 30 V - 5.1 - IF = 180 A, dIF/dt = 200 A/μs, VR = 200 V - 6.6 - IF = 180 A, dIF/dt = 200 A/μs, VR = 200 V, TJ = 150 °C - 15.2 - IF = 1.0 A, dIF/dt = 200 A/μs, VR = 30 V - 125 - IF = 180 A, dIF/dt = 200 A/μs, VR = 200 V - 243 - IF = 180 A, dIF/dt = 200 A/μs, VR = 200 V, TJ = 150 °C - 1295 - IF = 1.0 A, dIF/dt = 200 A/μs, VR = 30 V Reverse recovery time trr IF = 180 A, dIF/dt = 200 A/μs, VR = 200 V TJ = 25 °C TJ = 150 °C Peak recovery current IRRM Reverse recovery charge Qrr UNITS ns A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL per leg Thermal resistance, junction to case per module Thermal resistance, case to heatsink (flag greased surface) Weight RthJC RthCS MIN. TYP. MAX. - - 0.19 - - 0.095 - 0.10 - - 68 - g oz. - 2.4 - Mounting torque 30 (3.4) - 40 (4.6) Mounting torque center hole 12 (1.4) - 18 (2.1) Terminal torque 30 (3.4) - 40 (4.6) Vertical pull - - 80 2" lever pull - - 35 Case style www.vishay.com 2 UNITS °C/W lbf · in (N · m) lbf · in TO-244 (TO-244AB) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 93116 Revision: 20-Sep-10 VSUD360CW40 160 1000 RthJC = 0.19 K/W 150 TC - Maximum Allowable Case Temperature IF - Instantaneous Forward Current (A) FRED Pt® Vishay Semiconductors Ultrafast Soft Recovery Diode Module, 360 A 100 10 TJ = 25 °C TJ = 125 °C 140 DC 130 D = 0.5 120 110 1 100 0 0.5 1.0 1.5 2.0 0 VFM - Forward Voltage Drop (V) 93116_01 100 150 200 IDC - Current Rating (A) 93116_03 Fig. 3 - Maximum Current Rating Capability (Per Leg) Fig. 1 - Typical Forward Voltage Drop vs. Instantaneous Forward Current (Per Leg) 240 1000 TJ = 150 °C 220 100 10 180 TJ = 25 °C 1 160 0.1 0 93116_02 100 360 A 180 A 90 A 200 trr (ns) IR - Reverse Current (µA) 50 200 300 140 100 400 VR - Reverse Voltage (V) 200 300 400 500 dIF/dt (A/µs) 93116_04 Fig. 4 - Typical Reverse Recovery Time vs. dIF/dt TJ = 125 °C (Per Leg) Fig. 2 - Typical Reverse Current vs. Reverse Voltage (Per Leg) 200 Forward Power Loss (W) RMS limit 150 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.25 D = 0.50 100 50 DC 0 0 93116_05 50 100 150 200 Forward Current (A) Fig. 5 - Forward Power Loss Characteristics Document Number: 93116 Revision: 20-Sep-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 VSUD360CW40 Vishay Semiconductors FRED Pt® Ultrafast Soft Recovery Diode Module, 360 A VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 6 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 7 - Reverse Recovery Waveform and Definitions www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 93116 Revision: 20-Sep-10 VSUD360CW40 FRED Pt® Vishay Semiconductors Ultrafast Soft Recovery Diode Module, 360 A ORDERING INFORMATION TABLE Device code VS UD 360 C W 40 1 2 3 4 5 6 1 - Vishay Semiconductors product suffix 2 - Type of device: UD = FRED Pt® 3 - Current rating (360 = 360 A) 4 - Circuit configuration: C = Common cathode 5 - Type of device: 6 - Voltage rating (40 = 400 V) W = TO-244 wire bondable not isolated CIRCUIT CONFIGURATION CIRCUIT CONFIGURATION CODE CIRCUIT CIRCUIT DRAWING Lug terminal anode 2 Two separated diodes, parallel pin out C Base common cathode Lug terminal anode 1 LINKS TO RELATED DOCUMENTS Dimensions Document Number: 93116 Revision: 20-Sep-10 www.vishay.com/doc?95021 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 5 Outline Dimensions Vishay Semiconductors TO-244 DIMENSIONS in millimeters (inches) 35 (1.37) REF. 13 (0.51) 7 (0.27) 6 (0.23) 17.5 (0.69) 16.5 (0.65) 80 (3.15) Ø 5.2 (Ø 0.20) 3 12.6 (0.5) Ø 7.2 (Ø 0.28) (2 places) 3 1 2 21 (0.82) 20 (0.78) ¼" - 20 UNC 9.6 (0.37) MIN. 93 (3.66) MAX. Document Number: 95021 Revision: 25-Jun-07 For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1