RFMA5880-0.1W-02 5.8 – 8.0 GHz Power Amplifier MMIC ISSUED: 12/23/08 FEATURES • • • • 5.8 – 8.0GHz Operating Frequency Range 21.0dBm Output Power @1dB Compression 27.0dB Typical Power Gain @1dB Compression -41dBc OIMD3 @Pout 11dBm/tone N/C RF IN Vd Excelics RFMA5880 -0.1W-02 N/C N/C RF OUT N/C Vg APPLICATIONS • • Point-to-point and point-to-multipoint radio Military Radar Systems ELECTRICAL CHARACTERISTICS (TB=25 °C) SYMBOL PARAMETER/TEST CONDITIONS MIN TYP MAX UNITS 8.0 GHz Operating Frequency Range 5.8 P1dB Output Power @1dB Gain Compression 20.0 21.0 dBm G1dB Gain @1dB Gain Compression 24.0 27 dB F rd Output 3 Order Intermodulation Distortion @∆f=10MHz, Pout = 17dBm/tone -41 -38 dBc Input Return Loss -12 -10 dB Output Return Loss -10 ID1 Drain Current1 300 VD Drain Voltage VG Gate Voltage -5 Rth Thermal Resistance2 22 Tb Operating Base Plate Temperature OIMD3 Input RL Output RL dB 400 mA 7 V 5 -30 V o C/W +80 o C 1. Recommended to bias each amplifier stage separately using a gate voltage range, starting from -2.5 to -0.3V to achieve typical current levels. 2. Rth is mounting dependent. Measured result when used with Excelics recommended evaluation board. 3,4 MAXIMUM RATINGS AT 25°C SYMBOL CHARACTERISTIC ABSOLUTE CONTINOUS VD Drain to Source Voltage 12V 8V VG Gate to Source Voltage -5V -2.5 V ID Drain Current Idss 400mA PIN Input Power 20dBm @ 3dB compression TCH Channel Temperature 175°C 150°C TSTG Storage Temperature -65/175°C -65/150°C 4.0W 3W PT Total Power Dissipation 3. Operation beyond absolute or continuous ratings may result in permanent damage or reduction of MTTF respectively. 4. Bias conditions must also satisfy the following equation VDS*IDS < (TCH –TB)/RTH; where TB = Temperature of Base Plate Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 1 of 2 Issued December 2008 RFMA5880-0.1W-02 5.8 – 8.0 GHz Power Amplifier MMIC ISSUED: 12/23/08 02 Package Outline 0.433 0.216 4X.050 CHAMFER 2X DIA .090 THRU 0.204 PIN1 Indicator N/C Excelics 6x0.100 RFMA5880 -0.1W-02 RF IN 0.709 N/C Vd N/C 0.591 RF OUT 8 X .013 N/C Vg 8X 0.100±0.010 0.075 8X 0.004 0.040 0.025 All dimensions in inches ORDERING INFORMATION Part Number RFMA5880-0.1W-02 Refer 02 Package Outline DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 2 of 2 Issued December 2008