NSRLL30XV2T1G Schottky Barrier Diode These Schottky barrier diodes are designed for high−speed switching applications, circuit protection, and voltage clamping. Extremely low forward voltage reduces conduction loss. Miniature surface mount package is excellent for hand−held and portable applications where space is limited. http://onsemi.com Features • • • • • Extremely Fast Switching Speed Extremely Low Forward Voltage 0.6 V (max) @ IF = 200 mA Low Reverse Current ESD Rating: Class 3B per Human Body Model Class C per Machine Model This is a Pb−Free Device 30 VOLT SCHOTTKY BARRIER DIODE 1 CATHODE 2 ANODE MAXIMUM RATINGS Symbol Value Unit Reverse Voltage Rating VR 30 V Forward Current DC IF 200 mA 2 1 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. SOD−523 CASE 502 PLASTIC THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR−5 Board, (Note 1) TA = 25°C Derate above 25°C Symbol Max Unit PD 200 mW 1.57 mW/°C Thermal Resistance, Junction−to−Ambient RJA 635 °C/W Junction and Storage Temperature Range TJ, Tstg −55 to +150 °C MARKING DIAGRAM 1 RT M G G 2 1. FR−5 Minimum Pad. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Typ Max Unit Reverse Leakage (VR = 10 V) IR − − 1.0 A Forward Voltage (IF = 200 mA) VF − − 0.60 V Characteristic RT = Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation position may vary depending upon manufacturing location. ORDERING INFORMATION Device NSRLL30XV2T1G Package Shipping† SOD−523* 3000/Tape & Reel *This package is inherently Pb−Free. †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2006 August, 2006 − Rev. 0 1 Publication Order Number: NSRLL30XV2/D NSRLL30XV2T1G 820 +10 V 2k 0.1 F IF 100 H t tp r 0.1 F IF t trr 10% t DUT 50 Output Pulse Generator 50 Input Sampling Oscilloscope 90% iR(REC) = 1 mA IR VR OUTPUT PULSE (IF = IR = 10 mA; measured at iR(REC) = 1 mA) INPUT SIGNAL Notes: 1. A 2.0 k variable resistor adjusted for a Forward Current (IF) of 10 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. Notes: 3. tp » trr Figure 1. Recovery Time Equivalent Test Circuit 200 1000 10 125 °C 1.0 0.1 0.0 IR, REVERSE CURRENT (mA) 150 °C 85°C 0.1 25°C 0.2 −40 °C 0.3 −55°C 0.4 TA = 125°C 10 1.0 TA = 85°C 0.1 0.01 0.001 0.6 0.5 TA = 150°C 100 TA = 25°C 0 5 10 15 20 VF, FORWARD VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 2. Forward Voltage Figure 3. Leakage Current 14 12 CT, TOTAL CAPACITANCE (pF) IF, FORWARD CURRENT (mA) 100 10 8 6 4 2 0 0 5 10 15 20 VR, REVERSE VOLTAGE (VOLTS) Figure 4. Total Capacitance http://onsemi.com 2 25 30 25 30 NSRLL30XV2T1G PACKAGE DIMENSIONS SOD−523 CASE 502−01 ISSUE B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. −X− A −Y− B 1 2 DIM A B C D J K S D 2 PL 0.08 (0.003) M T X Y MILLIMETERS MIN NOM MAX 1.10 1.20 1.30 0.70 0.80 0.90 0.50 0.60 0.70 0.25 0.30 0.35 0.07 0.14 0.20 0.15 0.20 0.25 1.50 1.60 1.70 MIN 0.043 0.028 0.020 0.010 0.0028 0.006 0.059 INCHES NOM MAX 0.047 0.051 0.032 0.035 0.024 0.028 0.012 0.014 0.0055 0.0079 0.008 0.010 0.063 0.067 C −T− K J SEATING PLANE S SOLDERING FOOTPRINT* 1.40 0.0547 0.40 0.0157 0.40 0.0157 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 3 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NSRLL30XV2/D