2SD2153 Transistors High gain amplifier transistor (25V, 2A) 2SD2153 zExternal dimensions (Unit : mm) zFeatures 1) Low saturation voltage, typically VCE(sat) = 0.12V at IC = IB = 1A / 20mA 2) Excellent DC current gain characteristics. 4.0 2.5 0.5 1.6 (2) 4.5 (1) 0.5 3.0 1.5 0.4 1.0 (1) Base (2) Collector (3) Emitter 0.4 ROHM : MPT3 EIAJ : SC-62 1.5 1.5 0.4 (3) zAbsolute maximum ratings (Ta=25°C) Parameter Collector-base voltage Symbol VCBO Limits Unit 30 V Collector-emitter voltage VCEO 25 V Emitter-base voltage VEBO 6 V 2 A(DC) 3 A(Pulse) IC Collector current Collector power dissipation Junction temperature Storage temperature 0.5 PC 2 Tj Tstg ∗1 W ∗2 150 °C −55 to +150 °C + + ∗1 Single pulse, Pw=10ms ∗2 Mounted on a 40 40 t0.7mm Ceramic substrate zPackaging specifications and hFE Type 2SD2153 Package hFE Marking MPT3 UVW Code Basic ordering unit (pieces) T100 1000 DN ∗ ∗ Denotes hFE zElectrical characteristics (Ta=25°C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. 30 25 6 − − − 560 − − Typ. − − − − − 0.12 − 110 22 Max. − − − 0.5 0.5 0.5 2700 − − Unit V V V µA µA V − MHz pF Conditions IC = 50µA IC = 1mA IE = 50µA VCB = 20V VEB = 5V IC/IB = 1A/20mA VCE/IC = 6V/0.5A VCE = 10V , IE = −10mA , f= 100MHz VCB = 10V , IE = 0A , f = 1MHz ∗ ∗ Measured using pulse current. Rev.A 1/2 2SD2153 Transistors zElectrical characteristics curves 10 3mA 2mA 1 1B=1mA 0 1 0 2 1 500m Ta=100 C 25 C −25 C 200m 100m 50m 20m 10m 2 0 1 500m COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 1 500m 200m 100m 50m IC/IB=50 40 30 10 5m 500m 100m 10m 5m 5 1000 500 200 100 50 20 5 10 20 50 100 EMITTER INPUT CAPACITANCE : Cib(pF) COLLECTOR OUTPUT CAPACITANCE : Cob(pF) Ta=25°C f=1MHz Ic=0A ∗ This data are made from repesentative value of specific lot. The data do not indicate the worst value or guaranteed value. And we can not guarantee the value based on the data. 5m 10m 20m 50m 100m 200m 500m 1 2 1000 500 200 100 50 20 10 VCE=6V Ta=25 C 200 100 50 20 10 5 2 1 5 Ta=25°C f=1MHz Ic=0A 10 0.1 0.2 1 500 ∗ This data are made from repesentative value of specific lot. The data do not indicate the worst value or guaranteed value. And we can not guarantee the value based on the data. 1 2 5 10 20 50 100 200 500 1000 EMITTER CURRENT : IE (mA) Fig.6 Gain bandwith product vs. emitter current Fig.5 Collector-emitter saturation voltage vs. collector current Fig.4 Collector-emitter saturation voltage vs. collector current 100m Fig.3 DC current gain COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) 2 10m COLLECTOR CURRENT : IC (A) 10000 20m 1m 1m 2m 0.5 1 100 1m Ta=100 C 25 C −25 C 50m 2m 10 0.1 0.2 200 1.5 200m 1m 1m 2m 2 1 IC/IB=10 2m 5m 10m 20m 50m 100m 200m 500m 1 −40 C 1k 500 Fig.2 Ground emitter propagation characteristics Fig.1 Ground emitter output characteristics 10m 25 C BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) 20m Ta=100 C 2k 50 5m 2m 1m VCE=6V 5k TRANSITION FREQUENCY : fT(MHz) 4mA 10k ∗ This data are made from repesentative value of specific lot. The data do not indicate the worst value or guaranteed value. And we can not guarantee the value based on the data. 5 DC CURRENT GAIN : hFE 7mA 6mA 5mA 10 Ic max (Pulse) COLLECTOR CURRENT : Ic (A) 10mA 9mA 8mA COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) 2 PW=10ms PW=100ms 1 DC 0.1 0.01 Ta=25°C Single non repetitive pulse 0.5 1 2 5 10 0.001 0.1 1 10 100 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.7 Collector output capacitance vs. collector-base voltage Fig.8 Emitter input capacitance vs. emitter-base voltage Fig.9 Safe operating area Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1