FML9 Transistors General purpose transistor (isolated transistor and diode) FML9 A 2SB1689 and a RB461F are housed independently in a UMT package. zExternal dimensions (Unit : mm) zApplications DC / DC converter Motor driver 2.9 1.1 (3) (4) 0.95 0.95 1.9 (5) (1) zFeatures 1) Tr : Low VCE(sat) Di : Low VF 2) Small package 0.8 (2) 0.3 FML9 1.6 0.3Min. 0~0.1 0.15 2.8 Each lead has same dimensions zStructure Silicon epitaxial planar transistor Schottky barrier diode ROHM : SMT5 EIAJ : SC-74A zEquivalent circuit (3) (4) Di2 (2) (5) Tr1 (1) zPackaging specifications Type FML9 Package SMT5 Marking Code TR Basic ordering unit(pieces) 3000 L9 Rev.A 1/4 FML9 Transistors zAbsolute maximum ratings (Ta=25°C) Tr1 Limits Symbol −15 VCBO VCEO −12 VEBO −6 IC −1.5 Collector current ICP −3 Power dissipation Pc 200 Junction temperature Tj 150 Range of storage temperature Tstg −40 to +125 Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Unit V V V A A mW °C °C ∗1 ∗2 ∗1 Single pulse, Pw=1ms. ∗2 Each terminal mounted on a recommended land. Di2 Parameter Symbol Reak reverse voltage VRM Average rectified forward current IF Forward current surge peak (60HZ, 1∞) IFSM Reverse voltage (DC) VR Junction temperature Tj Range of storage temperature Tstg Limits 25 700 3 20 125 −40 to +125 Unit V mA A V °C °C zElectrical characteristics (Ta=25°C) Tr1 Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current Collector-emitter saturation voltage DC current gain Transition frequency Collector output capacitance Symbol BVCEO BVCBO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. −12 −15 −6 − − − 270 − − Typ. − − − − − −110 − 400 12 Max. − − − −100 −100 −200 680 − − Unit V V V nA nA mV − MHz pF Symbol Min. Typ. Max. Unit VF IR − − − − 490 200 mV µA Conditions IC=−1mA IC=−10µA IE=−10µA VCB=−15V VEB=−6V IC=−500mA, IB=−25mA VCE=−2V, IC=−200mA VCE=−2V, IE=200mA, f=100MHz VCB=−10V, IE=0mA, f=1MHz Di2 Parameter Forward voltage Reverse current Conditions IF=700mA VR=20V Rev.A 2/4 FML9 Transistors zElectrical characteristic curves Ta=100°C VCE=−2V Pulsed Ta=25°C Ta=−40°C 100 10 0.001 0.01 0.1 1 10 COLLECTOR CURRENT : IC (A) Fig.1 DC current gain vs. 10 IC/IB=20/1 VCE=−2V Pulsed 1 VCE(sat) 0.1 Ta=100°C Ta=25°C 0.01 Ta=−40°C 0.001 0.001 0.1 1 10 Ta=25°C Ta=−40°C 0.01 0 0.5 1 Pulsed 0.1 IC/IB=50/1 0.01 1.5 IC/IB=20/1 IC/IB=10/1 0.001 0.001 0.01 0.1 1 10 COLLECTOR CURRENT : IC (A) Fig.3 Collector-emitter saturation voltage vs. collector current 10000 Ta=25°C Ta=25°C VCE=−2V f=100MHz VCE=−5V f=100MHz SWITCHING TIME : (ns) 1 Ta=100°C Ta=25°C COLLECTOR CURRENT : IC (A) 1000 VCE=−2V Pulsed 0.1 1 vs. collector current TRANSITION FREQUENCY : fT (MHz) COLLECTOR CURRENT : IC (A) 0.01 Fig.2 Base-emitter saturation voltage 10 100 1000 100 tstg tf 10 tdon tr 10 0.001 BASE TO EMITTER CURRENT : VBE(on) (V) Fig.4 Grounded emitter propagation 0.01 0.1 1 10 1 0.001 0.01 0.1 1 EMITTER CURRENT : IE (A) COLLECTOR CURRENT : IC (A) Fig.5 Gain bandwidth product Fig.6 Switching time characteristics 10 vs. emitter current 1000 Ta=25˚C IE=0mA f=1MHz 100 Cib Cob 10 1 0.1 1 10 100 EMITTER TO BASE VOLTAGE : VEB(V) COLLECTOR TO BASE VOLTAGE : VCB(V) Fig.7 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage 10 COLLECTOR CURRENT : IC (A) EMITTER INPUT CAPACITANCE : Cib (pF) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) VBE(sat) Ta=100°C collector current 0.001 Ta=−40°C Ta=25°C COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) DC CURRENT GAIN : hFE 1000 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) BASE SATUATION VOLTAGE : VBE(sat) (V) Tr1 Ta=25°C Single Pulsed 1ms 1 10ms PW=100ms 0.1 DC Operation 0.01 0.01 0.1 1 10 100 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.8 Safe operation area Rev.A 3/4 FML9 Transistors Di2 1000m REVERSE CURRENT : IR (A) 100m 1 C 5° =2 5 °C 10m 2 =1 =− 25 °C Ta Ta 100m Ta FORWARD CURRENT : IF (A) 10 1m 0.1m Ta=125°C 10m 1m 100µ Ta=25°C 10µ 1µ Ta=−25°C 0.1µ 0 0.1 0.2 0.3 0.4 0.5 0.6 0 10 20 30 40 50 60 FORWARD VOLTAGE : VF (V) REVERSE VOLTAGE : VR (V) Fig.9 Forward characteristics Fig.10 Reverse characteristics 70 Rev.A 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1