SPMQ613-01 Solid State Devices, Inc. 600V, 200A FAST SWITCHING IGBT HALF BRIDGE 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SPMQ613-01 __ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV Level S = S Level FEATURES: • • • • • Hermetic construction, electrically isolated from the heatsinking baseplate Fast switching Single IGBT die (no paralleling) with ultrafast freewheeling diode Low switching and conduction losses TX, TXV, and Space Level Screening Available MAXIMUM RATINGS3/ SYMBOL VALUE UNIT Collector – Emitter Breakdown Voltage VCES 600 V Gate – Emitter Voltage VGES ±20 V IC1 IC2 200 100 A Pulsed Collector Current ICM 300 A Clamped Inductive Load Current (TJ = 125ºC) ILM 100 A Reverse Voltage Avalanche Energy (IC = 100A) EARV 5.6 mJ T OP & TSTG -55 to +150 ºC R0JC 0.50 ºC/W PD1 PD2 250 2 W W/ºC Max. Continuous Collector Current @ TC = 25ºC @ TC = 90ºC Operating & Storage Temperature Maximum Thermal Resistance (Junction to Case) Per switch Total Device Dissipation @ TC = 25ºC Dissipation Derating From @ TC = 25ºC to TC = 150ºC Notes: 1/ For ordering information, price, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all electrical characteristics @25ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0027A DOC SPMQ613-01 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 3/ ELECTRICAL CHARACTERISTICS Collector - Emitter Breakdown Voltage (ICES = 250μA, VGE = 0V) SYMBOL MIN TYP MAX UNIT BVCES 600 670 –– V VGE(th) 2.5 - 5.2 5.0 6.0 6 - V VCE(on) –– –– 1.70 2.15 2.35 3.00 1.65 2.20 2.70 1.70 2.25 2.90 2.4 2.2 - V o TA= 25 C o TA= 125 C o TA= -55 C Gate - Emitter Threshold Voltage (IC = 0.25mA, VCE = VGE) Collector - Emitter Saturation Voltage IC = 100A @ 25oC o IC = 150A @ 25 C o IC = 200A @ 25 C o IC = 300A @ 25 C o IC = 100A @ 125 C o IC = 200A @ 125 C o IC = 300A @ 125 C o IC = 100A @ -55 C o IC = 200A @ -55 C o IC = 300A @ -55 C Gate - Emitter Leakage Current (VGE = ±20V, VCE = 0V) o TA= 25 C o TA= 125 C o TA= -55 C IGES –– 0.01 0.05 0.005 1.0 10 - μA Collector Leakage Current (VCE = 600 V, VGE = 0V) o TA= 25 C o TA= 125 C o TA= -55 C ICES1 ICES2 ICES3 –– –– –– 25 7 2.5 200 –– - μA mA μA gfs 20 –– –– S VGE = 15V IC = 10A VCE = 300V Qg(on) Qge Qgc –– –– –– 575 70 320 650 150 370 VGE = 0V VCE = 25V f = 1 MHz Cies Coes Cres –– –– –– 84001 400 600 10,000 2,000 1,000 Resistive Switching Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time VCC = 300V VGE = 15V IC = 40A td(on) tr td(off) tf –– –– –– –– 150 550 550 2000 - Inductive Switching Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time VCC = 300V VGE = 15V IC = 45A RG = 10Ω L = 100µH td(on) tr td(off) tf –– –– –– –– 150 140 600 300 500 175 1000 500 Peak Current Ipk –– –– 200 A Peak Inverse Voltage PIV –– –– 600 V Iavg –– –– 100 A VF –– 1.1 1.6 1.8 1.4 1.5 - V trr –– 200 2000 nsec Forward Transconductance (IC = IC2, VCE = 10V) Gate Charge Total Gate Charge Gate-Emitter Charge Gate-Collector Charge Capacitance Input Capacitance Output Capacitance Reverse Transfer Capacitance nC pF nsec nsec ANTI-PARALLEL DIODE Average Current Diode Forward Voltage @ IF=100A, TJ=25 oC IF= 100A, TA= 25oC o IF= 300A, TA= 25 C o IF= 300A, TA= -55 C o IF= 300A, TA= 125 C Reverse Recovery Time (If=40A, di/dt=200A/µsec) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0027A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com SPMQ613-01 CASE OUTLINE: ASPM NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0027A DOC