MHQ2222 MECHANICAL DATA Quad Dual-In-Line NPN Silicon Transistors Dimensions in mm (inches) 0.457 ± 0.102 (0.018 ± 0.004) 14 FEATURES 8 • • • V(BR)CEO = 40V (Min) Hermetic Package Screening Options Available APPLICATIONS 1 2.134 (0.084) 7 • • General Purpose Switching DC to VHF Amplifiers 0.508 (0.020) Min. 1.422 ± 0.102 (0.056 ± 0.004) ABSOLUTE MAXIMUM RATINGS ( Tc = 25°C unless otherwise stated) VCEO VCBO VEBO IC PD TJ Tstg Collector - Emitter Voltage Collector - Base Voltage Emitter – Base Voltage Collector Current - Continuous Power Dissipation at TA = 25°C Derate Above 25°C Junction Temperature Storage Temperature 40V 60V 5V 500mA Each Transistor 0.65W Total Device 1.9W 3.72mW/°C 10.88mW/°C 200°C -65 to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk DOC 7964, ISS 1 MHQ2222 ELECTRICAL CHARACTERISTICS (TC =25°C unless otherwise stated) Parameter Test Conditions V(BR)CEO* Collector-Emitter Breakdown Voltage IC = 10mA IB = 0 40 V(BR)CBO Collector-Base Breakdown Voltage IC = 10µA IE = 0 60 V(BR)EBO Emitter-Base Breakdown Voltage IE = 10µA IC = 0 5 ICBO Collector-Base Cut-Off Current IE = 0 VCB = 50V 50 IEBO Emitter-Base Cut-Off Current IC = 0 VEB = 3V 50 IC = 10mA VCE = 10V 75 IC = 150mA VCE = 10V 100 IC = 300mA VCE = 10V 30 IC = 150mA IB = 15mA 0.4 IC = 300mA IB = 30mA 1.6 IC = 150mA IB = 15mA 1.3 IC = 300mA IB = 30mA 2.5 IC = 20mA VCE = 20V hFE* VCE(sat)* VBE(sat)* Forward-current transfer ratio Collector-Emitter Saturation Voltage Base-Emitter Saturated Voltage Min. Typ. Max. Unit V nA V DYNAMIC CHARACTERISTICS FT Transition Frequency Cobo Output Capacitance Cibo Input Capacitance ton Turn-On Time toff Turn-Off Time f = 100MHz IE = 0 200 MHz VCB = 10V 8 f = 1.0MHz IC = 0 pF VEB = 0.5V 30 f = 1.0MHz VCC = 30V VBE(off) = 0.5V IC= 150mA IB1 = 15mA VCC = 30V IC= 150mA 25 nS 250 IB1 = IB2 = 15mA * Pulse test tp = 300µs, δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk DOC 7964, ISS 1