BUY82X MECHANICAL DATA 8.51 (0.34) 9.40 (0.37) Dimensions in mm (inches) NPN SILICON PLANER EPITAXIAL TRANSISTOR IN HERMETICALLY SEALED METAL CASE 7.75 (0.305) 8.51 (0.335) 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) APPLICATIONS 0.41 (0.016) 0.53 (0.021) dia. Intended for High Voltage, High Current Switching Applications up to 10A 5.08 (0.200) typ. 2.54 (0.100) 2 1 3 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 45° TO39 PACKAGE (TO205AD) Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS TCASE = 25°C unless otherwise stated VCBO VCEO VEBO IC IB Ptot TJ Tstg Collector - Base Voltage Collector - Emitter Voltage (IB = 0) Emitter – Base Voltage (IC = 0) Continuous Collector Current Base Current Total Power Dissipation at Tcase = 25°C Tcase = 100°C Tamb = 25°C Junction Temperature Storage Temperature 150V 60V 7V 10A 2A 30W 15W 1W 175°C -65 to +175°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk DOC 7363, ISSUE 2 BUY82X THERMAL CHARACTERISTICS Max. Unit Rth j-case Thermal resistance to case 5.0 °C/W Rth j-amb Thermal resistance junction to ambient 150 °C/W ELECTRICAL CHARACTERISTICS (Tcase=25°C unless otherwise stated) Parameter hFE* Forward-current transfer ratio VCE(sat)* Collector to Emitter Saturation Voltage VBE(sat)* Base to Emitter Saturated Voltage ICBO Collector to Base Cut-Off Current IEBO Emitter to Base Cut-Off Current Test Conditions IC = 1.5A IC = 10A VCE = 5.0V Min. Typ. Max. 40 15 IC = 10A IB = 1A 1.0 IC = 1.5A IB = 150mA 0.8 IC = 10A IB = 1A 1.8 IC = 1.5A IB = 150mA 1.2 IE = 0 VCB = 100V 10 TCase = 150°C 500 VEB = 5V 10 IC = 0 Unit V µA DYNAMIC CHARACTERISTICS Ton Turn-on time VCC=30V, IC=5.0A, IB=0.5A 1.5 Toff Turn-off time VCC=30V, IC=5.0A, IB1=-IB2=0.5A 1.5 Cob Output Capacitance Cib Input Capacitance FT Transition Frequency IE = 0 VCB = 10V 200 f = 1.0MHz IC = 0 pF VEB = 0.5V 1200 f = 1.0MHz IC = 100mA f = 20MHz VCE = 10V µs 20 MHz * Pulse test tp = 300µs, δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk DOC 7363, ISSUE 2