2N5038 MECHANICAL DATA Bipolar NPN Device in a Hermetically Sealed TO3 Metal Package Dimensions in mm (inches) 25.15 (0.99) 26.67 (1.05) 6.35 (0.25) 9.15 (0.36) APPLICATIONS 2 22.23 (0.875) max. 1 1.52 (0.06) 3.43 (0.135) 0.97 (0.060) 1.10 (0.043) 16.64 (0.655) 17.15 (0.675) 29.9 (1.177) 30.4 (1.197) 38.61 (1.52) 39.12 (1.54) 10.67 (0.42) 11.18 (0.44) Intended for High Current Switching Applications. 3 (case) 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50) TO3 (TO204AA) Pin 1 = Base Pin 2 = Emitter Case = Collector ABSOLUTE MAXIMUM RATINGS TCASE = 25°C unless otherwise stated VCBO VCEX VCEO VEBO IC IB Ptot Tstg Collector - Base Voltage Collector - Emitter Voltage (VBE = -1.5V RBE = 100Ω) Collector - Emitter Voltage Emitter – Base Voltage Continuous Collector Current Base Current Total Power Dissipation at Tcase = 25°C Derate above 25°C Storage Temperature 150V 150V 90V 7V 20A 5A 140W 0.8W/°C -65 to 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk DOC 7365, ISSUE 1 2N5038 THERMAL CHARACTERISTICS Rth j-case Thermal resistance to case Max. Unit 1.25 °C/W ELECTRICAL CHARACTERISTICS (Tcase=25°C unless otherwise stated) Parameter hFE* Forward-current transfer ratio VCE(sat)* Collector to Emitter Saturation Voltage Test Conditions IC = 2A VCE = 5.0V IC = 12A Min. Typ. Max. 50 250 20 100 IC = 12A IB = 1.2A 1.0 IC = 20A IB = 5A 2.5 IC = 20A IB = 5A 3.3 V(BR)CEO* Base to Emitter Saturated Voltage Collector to Emitter Breakdown Voltage V(BR)CEX* Collector to Emitter Breakdown Voltage IC = 0.2A VBE(sat)* ICEV Collector Cut-Off Current IC = 0.2A VBE = -1.5V VCE = 140V VBE = -1.5V VCE = 100V VBE = -1.5V 150 50 10 TCase = 150°C ICEO Collector Cut-Off Current IEBO Emitter Cut-Off Current VBE* Base-Emitter Voltage V 90 RBE = 100Ω VCE = 70V IB = 0 VEB = 7V 20 mA 50 IC = 0 VEB = 5V Unit 5 VCE = 5.0V IC = 12A 1.8 VCC = 30V IC=12A 0.5 V DYNAMIC CHARACTERISTICS tr Rise Time ts Storage Time tf Fall Time Cob Output Capacitance |hfe| Small Signal Current Gain 1.5 IB1=-IB2=1.2A IE = 0 0.5 VCB = 10V 500 f = 1.0MHz IC = 2A f = 5MHz µs VCE = 10V pF 12 * Pulse test tp = 300µs, δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk DOC 7365, ISSUE 1