ONSEMI NSM21356DW6T1G

NSM21356DW6T1G
Dual Complementary
Transistors
General Purpose PNP Transistor and
NPN Transistors with Monolithic Bias
Network
http://onsemi.com
NSM21356DW6T1G contains a single PNP transistor and a
monolithic bias network NPN transistor with two resistors; a series
base resistor and a base-emitter resistor. This device is designed to
replace multiple transistors and resistors on customer boards by
integrating these components into a single device.
NSM21356DW6T1G is housed in a SC-88/SOT-363 package which
is ideal for low power surface mount applications in space constrained
applications.
(3)
(2)
Q1
Q2
R2
(4)
Features
(1)
R1
(5)
•Simplifies Circuit Design
•Reduces Board Space
•Reduces Component Count
•Q1: NPN BRT, R1 = R2 = 47 k
•Q2: PNP
•This is a Pb-Free Device
(6)
6
1
SC-88/SOT-363
CASE 419B
STYLE 1
Applications
•Logic Switching
•Amplification
•Driver Circuits
•Interface Circuits
MARKING DIAGRAM
6
N2 M G
G
MAXIMUM RATINGS
1
(TA = 25°C unless otherwise noted)
Rating - Q1 (NPN BRT)
Symbol
Value
Unit
Collector‐Base Voltage
VCBO
50
Vdc
Collector‐Emitter Voltage
VCEO
50
Vdc
IC
100
mAdc
Symbol
Value
Unit
Collector - Base Voltage
V(BR)CBO
-80
Vdc
Collector - Emitter Voltage
V(BR)CEO
-65
Vdc
Emitter - Base Voltage
V(BR)EBO
-5.0
Vdc
Device
IC
-100
mAdc
NSM21356DW6T1G
Collector Current
Rating - Q2 (PNP)
Collector Current - Continuous
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
© Semiconductor Components Industries, LLC, 2008
March, 2008 - Rev. 0
1
N2
= Device Code
M
= Date Code*
G
= Pb-Free Package
(Note: Microdot may be in either location)
*Date Code orientation and/or position may vary
depending upon manufacturing location.
ORDERING INFORMATION
Package
Shipping†
SC-88
3000/Tape & Reel
(Pb-Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Publication Order Number:
NSM21356DW6/D
NSM21356DW6T1G
THERMAL CHARACTERISTICS
Characteristic (One Junction Heated)
Symbol
Total Device Dissipation
TA = 25°C
Derate above 25°C
Max
Unit
180 (Note 1)
1.44 (Note 1)
mW
mW/°C
RqJA
692 (Note 1)
°C/W
Symbol
Max
Unit
230
1.83
mW
mW/°C
RqJA
544
°C/W
TJ, Tstg
-55 to +150
°C
PD
Thermal Resistance, Junction‐to‐Ambient
Characteristic (Both Junctions Heated)
Total Device Dissipation,
TA = 25°C
Derate above 25°C
PD
Thermal Resistance, Junction‐to‐Ambient
Junction and Storage Temperature
1. FR-4 @ Minimum Pad of 1.45 mm2, 1 oz Cu.
ELECTRICAL CHARACTERISTICS - Q1 NPN BRT (TA = 25°C unless otherwise noted)
Symbol
Min
Typ
Max
Unit
Collector‐Base Cutoff Current
(VCB = 50 V, IE = 0)
ICBO
-
-
100
nAdc
Collector‐Emitter Cutoff Current
(VCE = 50 V, IB = 0)
ICEO
-
-
500
nAdc
Emitter‐Base Cutoff Current
(VEB = 6.0 V, IC = 0)
IEBO
-
-
0.1
mAdc
Collector‐Base Breakdown Voltage
(IC = 10 mA, IE = 0)
V(BR)CBO
50
-
-
Vdc
Collector‐Emitter Breakdown Voltage (Note 2)
(IC = 2.0 mA, IB = 0)
V(BR)CEO
50
-
-
Vdc
hFE
80
140
-
VCE(sat)
-
-
0.25
Vdc
Output Voltage (on)
(VCC = 5.0 V, VB = 3.5 V, RL = 1.0 kW)
VOL
-
-
0.2
Vdc
Output Voltage (off)
(VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW)
VOH
4.9
-
-
Vdc
Input Resistor
R1
32.9
47
61.1
kW
Resistor Ratio
R1/R2
0.8
1.0
1.2
Characteristic
OFF CHARACTERISTICS
ON CHARACTERISTICS (Note 2)
DC Current Gain
(VCE = 10 V, IC = 5.0 mA)
Collector‐Emitter Saturation Voltage
(IC = 10 mA, IB = 0.3 mA)
2. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0%
http://onsemi.com
2
NSM21356DW6T1G
ELECTRICAL CHARACTERISTICS - Q2 PNP (TA = 25°C unless otherwise noted)
Symbol
Min
Typ
Max
Unit
Collector-Emitter Breakdown Voltage
(IC = -10 mA)
V(BR)CEO
-65
-
-
V
Collector-Emitter Breakdown Voltage
(IC = -10 mA, VEB = 0)
V(BR)CES
-80
-
-
V
Collector-Base Breakdown Voltage
(IC = -10 mA)
V(BR)CBO
-80
-
-
V
Emitter-Base Breakdown Voltage
(IE = -1.0 mA)
V(BR)EBO
-5.0
-
-
V
ICBO
-
-
-15
-4.0
nA
mA
220
150
290
475
-
-
-0.3
-0.65
-
-0.7
-0.9
-
-0.6
-
-
-0.75
-0.82
Characteristic
OFF CHARACTERISTICS
Collector Cutoff Current (VCB = -30 V)
Collector Cutoff Current (VCB = -30 V, TA = 150°C)
ON CHARACTERISTICS
hFE
DC Current Gain
(IC = -10 mA, VCE = -5.0 V)
(IC = -2.0 mA, VCE = -5.0 V)
Collector-Emitter Saturation Voltage
(IC = -10 mA, IB = -0.5 mA)
(IC = -100 mA, IB = -5.0 mA)
VCE(sat)
Base-Emitter Saturation Voltage
(IC = -10 mA, IB = -0.5 mA)
(IC = -100 mA, IB = -5.0 mA)
VBE(sat)
Base-Emitter On Voltage
(IC = -2.0 mA, VCE = -5.0 V)
(IC = -10 mA, VCE = -5.0 V)
VBE(on)
-
V
V
V
PD, POWER DISSIPATION (mW)
300
250
200
150
100
50
0
-50
RqJA = 833°C/W
0
50
100
TA, AMBIENT TEMPERATURE (°C)
Figure 1. Derating Curve
http://onsemi.com
3
150
NSM21356DW6T1G
PACKAGE DIMENSIONS
SC-88 (SOT-363)
CASE 419B-02
ISSUE V
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 419B-01 OBSOLETE, NEW STANDARD 419B-02.
e
6
5
4
HE
DIM
A
A1
A3
b
C
D
E
e
L
HE
-E1
2
3
b 6 PL
0.2 (0.008)
M
E
M
A3
STYLE 1:
PIN 1.
2.
3.
4.
5.
6.
C
A
A1
MILLIMETERS
MIN
NOM MAX
0.80
0.95
1.10
0.00
0.05
0.10
0.20 REF
0.10
0.21
0.30
0.10
0.14
0.25
1.80
2.00
2.20
1.15
1.25
1.35
0.65 BSC
0.10
0.20
0.30
2.00
2.10
2.20
INCHES
NOM MAX
0.037 0.043
0.002 0.004
0.008 REF
0.004 0.008 0.012
0.004 0.005 0.010
0.070 0.078 0.086
0.045 0.049 0.053
0.026 BSC
0.004 0.008 0.012
0.078 0.082 0.086
MIN
0.031
0.000
EMITTER 2
BASE 2
COLLECTOR 1
EMITTER 1
BASE 1
COLLECTOR 2
L
SOLDERING FOOTPRINT*
0.50
0.0197
0.65
0.025
0.65
0.025
0.40
0.0157
1.9
0.0748
SCALE 20:1
mm Ǔ
ǒinches
*For additional information on our Pb-Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NSM21356DW6/D