(1/4) Chip Beads(SMD) For Signal Line Conformity to RoHS Directive MMZ Series MMZ0603 Type APPLICATIONS Removal of signal line noises of cellular phones, portable audio players, various modules, DSCs, portable game machines, etc. PRODUCT IDENTIFICATION MMZ 0603 S 121 C T (1) (2) (3) (4) (5) (6) (1) Series name (2) Dimensions L×W (3) Material code (4) Nominal impedance 121:120Ω at 100MHz (5) Characteristic type (6) Packaging style T:Taping HANDLING AND PRECAUTIONS • Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. • After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. • Do not expose the inductors to stray magnetic fields. • Avoid static electricity discharge during handling. • When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350°C. Soldering time should not exceed 3 seconds. MATERIAL CHARACTERISTICS S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz. Y material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz. D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies. Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications. F material: This new product inherits the characteristic of our Dmaterial, namely its sharp impedance rise time, and its impedance peak frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in the GHz range. TYPICAL MATERIAL CHARACTERISTICS 2000 1800 D 1600 Impedance(Ω) FEATURES • This is a multilayered chip bead product with dimensions of L0.6×W0.3×T0.3mm. • The product is magnetically shielded, allowing high density mounting. • We refined the rules for internal conductor design to reduce floating capacity between conductors, which in turn has contributed to a dramatic improvement in high frequency characteristics. We have also been able to expand and reinforce the EMI suppression in the GHz range. • It is a product conforming to RoHS directive. Y 1400 1200 1000 S 800 F 600 400 200 0 10 100 Frequency(MHz) 1000 • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • Please contact our Sales office when your application are considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) • All specifications are subject to change without notice. 010-01 / 20101006 / e9412_mmz0603.fm (2/4) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN ELECTRICAL CHARACTERISTICS Part No. MMZ0603S100C MMZ0603S800C MMZ0603S121C MMZ0603S241C MMZ0603S471C MMZ0603S601C MMZ0603Y121C MMZ0603Y241C MMZ0603Y471C MMZ0603Y601C MMZ0603D330C MMZ0603D560C MMZ0603D800C MMZ0603F100C MMZ0603F220C MMZ0603F330C 0.30 0.3±0.03 0.6±0.03 0.25 0.30 0.25 0.3±0.03 0.1min. Weight: 0.3mg Dimensions in mm TEMPERATURE RANGES Operating/storage –55 to +125°C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 15000 pieces/reel ∗ DC resistance (Ω )max. 0.12 0.37 0.45 0.75 1.30 1.45 0.75 0.80 1.40 1.50 0.85 1.05 1.40 0.60 1.00 1.30 Impedance (Ω)[100MHz]∗ 10±5Ω 80±25% 120±25% 240±25% 470±25% 600±25% 120±25% 240±25% 470±25% 600±25% 33±25% 56±25% 80±25% 10±5Ω 22±25% 33±25% Rated current (mA)max. 500 200 200 200 100 100 200 200 200 200 100 100 100 200 200 150 Test equipment: E4991A or equivalent Test tool: 16197 or equivalent Test temperature: 25±10°C RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260˚C Natural cooling 230˚C 180˚C 150˚C Preheating 60 to 120s Soldering 30 to 60s Time(s) Z 100 1000 Frequency (MHz) 450 400 400 350 350 300 250 200 150 Z 0 10000 MMZ0603S241C 10 100 1000 Frequency (MHz) 200 150 0 10000 MMZ0603S471C 450 250 Z R X 50 X 1 300 100 R 50 X 10 450 100 R 1 MMZ0603S121C Impedance(Ω) 50 45 40 35 30 25 20 15 10 5 0 Impedance(Ω) Impedance(Ω) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ0603S100C MMZ0603S800C 1 10 100 1000 Frequency (MHz) 10000 MMZ0603S601C 1000 1000 800 800 Impedance(Ω) Impedance(Ω) 350 300 250 Z 200 R 150 X 100 Impedance(Ω) 400 600 Z 400 R X 200 600 Z R 400 X 200 50 0 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 • All specifications are subject to change without notice. 010-01 / 20101006 / e9412_mmz0603.fm (3/4) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MMZ0603Y121C MMZ0603Y241C 200 R 800 400 100 Z R 200 50 0 800 600 Z 150 1000 Impedance(Ω) Impedance(Ω) 250 1000 Impedance(Ω) 300 MMZ0603Y471C X 1 10 600 Z R 400 X 200 X 100 1000 Frequency (MHz) 0 10000 1 10 100 1000 Frequency (MHz) 0 10000 1 10 100 1000 Frequency (MHz) 10000 MMZ0603Y601C 1000 600 Z R 400 X 200 0 1 10 100 1000 Frequency (MHz) 10000 MMZ0603D560C MMZ0603D800C 500 1000 1000 400 800 800 Impedance(Ω) Impedance(Ω) MMZ0603D330C 600 300 Z R 400 200 Z R 200 100 1 10 100 1000 Frequency (MHz) 0 10000 1 10 100 1000 Frequency (MHz) R X 1 10 100 1000 Frequency (MHz) 10000 MMZ0603F330C 800 1200 700 400 0 10000 MMZ0603F220C 500 1000 Impedance(Ω) 600 Impedance(Ω) Impedance(Ω) Z 400 X MMZ0603F100C 500 300 Z 400 200 R 300 Z R 200 100 X 0 600 200 X 0 Impedance(Ω) Impedance(Ω) 800 1 10 100 1000 Frequency (MHz) 0 600 Z 400 200 100 10000 800 1 X 10 100 1000 Frequency (MHz) 10000 0 1 10 X 100 1000 Frequency (MHz) R 10000 • All specifications are subject to change without notice. 010-01 / 20101006 / e9412_mmz0603.fm (4/4) PACKAGING STYLES REEL DIMENSIONS ø60min. 1.0 2.0±0.5 8.4 +2.0 –0.0 ø13±0.2 14.4max. ø21±0.8 ø180±2.0 Dimensions in mm Cavity 3.5±0.05 1.5 +0.1 –0.0 0.5max. 0.38±0.05 4.0±0.1 2.0±0.05 160min. Taping 2.0±0.05 0.68±0.05 8.0±0.3 Sprocket hole 1.75±0.1 TAPE DIMENSIONS 200min. Drawing direction 300min. Dimensions in mm • All specifications are subject to change without notice. 010-01 / 20101006 / e9412_mmz0603.fm