DRA4D Series • DC Motor Reversing Contactor • Ratings of 6 & 12 Amps • Load voltage ratings of 1-100VDC and 1-250VDC • Fits standard 35mm DIN-RAIL • LED input status indicator. Green (Forward), Yellow (Reverse) • DC control • cUL Recognized, IEC Rated, CE & RoHS Compliant • Horsepower Rated PRODUCT SELECTION Description 5-15 VDC Control 15-32 VDC Control 12A 6A DRA4D100D12 DRA4D100E12 DRA4D250D6 DRA4D250E6 DRA4D100x12 DRA4D250x6 1-100 (3) 12 1.0 1.0 0.1 110 0.011 1-250 (2) 6 (5) 1.0 20 0.1 91 0.45 0.48 24/10 0.5-4.0 1/4, 4 FLA @ 90 VDC 12 FLA @ 90 VDC, 1KW 4.0 FLA @ 90 VDC, 360W 0.45 24/10 0.5-4.0 1/4, 2 FLA @ 180 VDC 6.0 FLA @ 180 VDC, 1KW 2.0 FLA @ 180 VDC, 360W AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage [VDC] Maximum Load Current [Adc] (4) Minimum Load Current [mAdc] Maximum Off-State Leakage Current @ Rated Voltage [uA] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Surge Current (10ms) [Apk] On-State resistance at rated current (RDSOn) [Ohms] Thermal Resistance Junction to Case (Rjc) [°C/W] Min/Max stranded/solid wire [AWG] Min/Max stranded/solid wire [IEC mm²] HP Rating per UL508 @ 40°C IEC 60947-4-1 Ratings DC-1 IEC 60947-4-1 Ratings DC-3 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Minimum Input Current [mA] Maximum Input Current [mA] Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] Min/Max stranded/solid wire Min/Max stranded/solid wire [IEC mm²] DRA4DxxxD DRA4DxxxE 5.0-15 VDC 5.0 VDC 2.5 VDC 16 24.5 See Note 6 22 0.264 24/12 0.5-2.5 15-32 VDC 15 VDC 2.9 VDC 20.5 22 See Note 6 22 0.33 24/12 0.5-2.5 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Recommended Terminal Screw Torque: GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) UL maximum rated voltage is 180VDC 3) UL maximum rated voltage is 90VDC. 4) At 40°C and mounted in vertical position 5) At 40°C single unit, multiple units need spacing of 45mm. No spacing maximum current is 5.5A 6) Input circuitry incorporates active current limiter. MECHANICAL SPECIFICATIONS Parameters 2500Vrms 109 Ohms 35 pF @ 1KHz -30ºC to 60ºC -30ºC to 85ºC 4.0 in lb (0.45 Nm) WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge – Level 3 IEC 61000-4-4 : Electrically Fast Transients – Level 2 (Criteria A) IEC 61000-4-5 : Electrical Surges - Level 2 (Criteria A) E116949 Rev 111011