MA MAD MADD MAT TO-5 HIGH-PERFORMANCE RELAYS ■ ■ ■ MA MAD MADD MAT STANDARD TO-5 HIGH-PERFORMANCE RELAY STANDARD TO-5 DIODE SUPPRESSED HIGH-PERFORMANCE RELAY STANDARD TO-5 DIODE SUPPRESSED/PROTECTED HIGH-PERFORMANCE RELAY STANDARD TO-5 DIODE SUPPRESSED/TRANSISTOR DRIVEN HIGH-PERFORMANCE RELAY QUALIFIED TO MIL-R-39016/9 QUALIFIED TO MIL-R-39016/15 QUALIFIED TO MIL-R-39016/20 QUALIFIED TO MIL-R-28776/1 – X1 X2 – + X2 X1 A2 B2 A2 B2 A1 B1 A1 B1 A3 B3 A3 TERMINAL VIEW ■ ■ Hermetically sealed High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching A1 B3 A3 TERMINAL VIEW Stationary: Gold/platinum/palladium/silver alloy (gold plated) Moveable: Gold/platinum/palladium/silver alloy (gold plated) B1 A1 + X1 XB B2 B1 A3 B3 B3 TERMINAL VIEW FEATURES ■ ■ Suppression & protection diodes ■ Hermetically sealed ■ High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching ELECTRICAL CHARACTERISTICS CONTACT MATERIAL A2 TERMINAL VIEW Suppression diode Hermetically sealed High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching 2 Form C (DPDT) B2 FEATURES ■ ■ ■ CONTACT ARRANGEMENT – X2 X1 A2 FEATURES FEATURES + X2 Transistor driver & suppression diode ■ Hermetically sealed ■ High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching CONTACT RATINGS CONTACT LOAD TYPE 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc 0.1 A @ 28 Vdc OPERATIONS MIN. Resistive 100,000 Resistive (case not grounded) 100,000 Resistive 100,000 Inductive (0.32 Henry) 100,000 Lamp 100,000 Low Level 1,000,000 Intermediate Current 50,000 CONTACT RESISTANCE Before Life: 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life: 200 milliohms max. (measured @ 1 A @ 28 Vdc) .370 (9.40) DIA MAX .335 (8.51) DIA MAX .031 ± .003 (0.79) .035 (0.89) .280 (7.11) MAX TRANSISTOR BASE CONNECTION (MAT ONLY) MECHANICAL LIFE EXPECTANCY 1 million operations TERMINALS W 1.500 MIN (38.1) 36° ± 3° C .500 MIN (12.7) P .187±.010 (4.75±.25) (Length excludes mounting pad) COIL VOLTAGE 5 to 30 Vdc COIL POWER .200 (5.08) DIA GROUND PIN (OPTIONAL) 675 mW max. @ 25°C DUTY CYCLE Continuous PICK-UP VOLTAGE Approximately 50% of nominal coil voltage OPTIONAL PINS .017+.002 (0.43) DIA -.001 .370 (9.40) DIA MAX ENCLOSURE HEADER PICK-UP SENSITIVITY 130 mW max. @ 25°C 8 Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation CII Products, 1396 Charlotte Hwy. P.O. Box 520 Fairview, NC 28730 (828) 628-1711 Fax(828) 628-1439 OPERATING CHARACTERISTICS ENVIRONMENTAL CHARACTERISTICS SEMICONDUCTOR CHARACTERISTICS TEMPERATURE RANGE DIODE OperateTime: 2.0 ms max. -65°C to +125°C 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage ReleaseTime: MA: 1.5 ms max. MAD/MADD: 4.0 ms max. (suppression diode, suppression/steering diodes) MAT: 7.5 ms max. (transistor driven) 0.09 oz. (2.55 gms) 0.10 oz. (2.80 gms) with spreader pad attached WEIGHT TRANSISTOR 0.3 Vdc min. base turn off voltage 6.0 Vdc min. emitter-base breakdown voltage (BVEBO) @ 25°C 80.0 Vdc min. collector-base breakdown voltage (BVCBO) @ 25°C & IC=100 µA VIBRATION RESISTANCE 30 G’s, 10 to 3,000 Hz SHOCK RESISTANCE CONTACT BOUNCE 75 G’s, 6 ±1 ms max. 1.5 ms max QPL APPROVAL MIL-R-39016/9 (JMA) MIL-R-39016/15 (JMAD) MIL-R-39016/20 (JMADD) MIL-R-28776/1 (JMAT) DIELECTRIC WITHSTANDING VOLTAGE Between Open Contacts: 500 Vrms 60 Hz Between Adjacent Contacts: 500 Vrms 60 Hz .103 (2.62) Between Contacts & Coil: 500 Vrms 60 Hz .156 (3.96) .014±.003 (0.36) .370 (9.40) SQ MAX INSULATION RESISTANCE .395 (10.03) SQ MAX .100 (2.54) 0.47 (1.19) DIA .150 (3.81) 10,000 megohms min. @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) .100 (2.54) .100 (2.54) .140 – .175 DIA (3.56 – 4.45) S S2 W SPREADER & MOUNTING PADS COIL DATA NOM. COIL VOLTAGE (Vdc) COIL RESISTANCE IN OHMS ±10% @ 25°C (Note 1) COIL CIRCUIT CURRENT mA (MAX.) COIL CIRCUIT CURRENT mA (MIN.) (Note 1&2) (Note 1&2) MA/MAD 5.0 6.0 9.0 12.0 18.0 26.5 30.0 50 98 220 390 880 1,560 2,500 n/a n/a n/a n/a n/a n/a n/a MADD 5.0 6.0 9.0 12.0 18.0 26.5 39 78 220 390 880 1,560 MAT 5.0 6.0 9.0 12.0 18.0 26.5 50 98 220 390 880 1,560 PICKUP VOLTAGE Vdc (MAX.) @ 25°C (Note 2) BASE TURN ON CURRENT mA (MAX.) @ 25°C PICKUP VOLTAGE Vdc (MAX.) @ 125°C (Note 2) BASE TURN ON CURRENT mA (MAX.) @ 125°C DROP-OUT VOLTAGE Vdc (MIN.) @ 25°C (Note 2) DROP-OUT VOLTAGE Vdc (MIN.) @ -65°C (Note 2) NOM. COIL POWER (mW) @ 25°C MAX. COIL VOLTAGE COIL DESIG. n/a n/a n/a n/a n/a n/a n/a 2.7 3.5 5.3 7.0 10.5 14.2 17.7 n/a n/a n/a n/a n/a n/a n/a 3.5 4.5 6.8 9.0 13.5 18.0 22.0 n/a n/a n/a n/a n/a n/a n/a 0.22 0.28 0.54 0.63 0.91 1.37 1.50 0.14 0.18 0.35 0.41 0.59 0.89 1.00 500 367 368 369 368 450 360 5.8 8.0 12.0 16.0 24.0 32.0 36.0 5 6 9 12 18 26 30 128.2 78.3 42.9 32.8 22.1 18.5 93.2 58.3 33.0 25.6 17.5 14.8 3.2 4.0 6.3 8.0 11.5 15.2 n/a n/a n/a n/a n/a n/a 4.0 5.0 7.8 10.0 14.5 19.0 n/a n/a n/a n/a n/a n/a 0.6 0.7 0.9 1.1 1.4 1.8 0.6 0.7 0.8 0.9 1.1 1.4 641 462 368 369 368 450 5.8 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 112.1 69.9 47.4 35.8 24.0 19.8 82.2 52.9 35.3 26.6 17.9 14.7 2.7 3.5 5.3 7.0 10.5 14.2 3.5 4.5 6.8 9.0 13.5 18.0 3.00 2.04 1.36 1.03 0.68 0.50 0.22 0.28 0.54 0.63 0.91 1.37 0.14 0.18 0.35 0.41 0.59 0.89 500 367 368 369 368 450 5.8 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 0.75 0.55 0.36 0.27 0.16 0.13 TO-5 HIGH-PERFORMANCE RELAYS TIMING Note 1: Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max. Note 2: Set base current at 3 mA to 15 mA during measurements. SPECIFYING A PART NUMBER EXAMPLE: TYPE TERMINALS DIODES TRANSISTOR GROUND PINS COILS SPREADER/MOUNTING PADS MA C D G -26 S Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation 9