ONSEMI NDF10N60ZG

NDF10N60Z
N-Channel Power MOSFET
600 V, 0.75 W
Features
•
•
•
•
•
•
Low ON Resistance
Low Gate Charge
ESD Diode−Protected Gate
100% Avalanche Tested
100% Rg Tested
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
VDSS (@ TJmax)
RDS(ON) (MAX) @ 5 A
650 V
0.75 Ω
ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Symbol
NDF
Unit
VDSS
600
V
Continuous Drain Current, RqJC (Note 1)
ID
10
A
Continuous Drain Current
TA = 100°C, RqJC (Note 1)
ID
6.0
A
Pulsed Drain Current,
tP = 10 ms
IDM
40
A
Power Dissipation, RqJC
PD
39
W
Gate−to−Source Voltage
VGS
±30
V
Single Pulse Avalanche Energy
(L = 6.0 mH, ID = 10 A)
EAS
300
mJ
ESD (HBM) (JESD22−A114)
Vesd
3900
V
RMS Isolation Voltage
(t = 0.3 sec., R.H. ≤ 30%,
TA = 25°C) (Figure 13)
VISO
4500
V
Peak Diode Recovery (Note 2)
Rating
Drain−to−Source Voltage
dv/dt
4.5
V/ns
Continuous Source Current (Body Diode)
IS
10
A
Maximum Temperature for
Soldering Leads
TL
260
°C
Operating Junction and
Storage Temperature Range
TJ, Tstg
−55 to 150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Limited by maximum junction temperature.
2. IS ≤ 10 A, di/dt ≤ 200 A/ms, VDD = 80% BVDSS
© Semiconductor Components Industries, LLC, 2012
February, 2012 − Rev. 10
1
N−Channel
D (2)
G (1)
S (3)
1
2
3
NDF10N60ZG
TO−220FP
CASE 221D
1
2
3
NDF10N60ZH
TO−220FP
CASE 221AH
ORDERING AND MARKING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 6 of this data sheet.
Publication Order Number:
NDF10N60Z/D
NDF10N60Z
THERMAL RESISTANCE
Symbol
NDF10N60Z
Unit
Junction−to−Case (Drain)
Parameter
RqJC
3.2
°C/W
Junction−to−Ambient Steady State (Note 3)
RqJA
50
3. Insertion mounted
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Characteristic
Test Conditions
Symbol
Min
VGS = 0 V, ID = 1 mA
BVDSS
600
Reference to 25°C,
ID = 1 mA
DBVDSS/
DTJ
Typ
Max
Unit
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage
Breakdown Voltage Temperature Coefficient
Drain−to−Source Leakage Current
V
0.6
V/°C
IDSS
1
VGS = ±20 V
IGSS
±10
mA
Static Drain−to−Source
On−Resistance
VGS = 10 V, ID = 5.0 A
RDS(on)
0.65
0.75
W
Gate Threshold Voltage
VDS = VGS, ID = 100 mA
VGS(th)
3.9
4.5
V
VDS = 15 V, ID = 10 A
gFS
VDS = 600 V, VGS = 0 V
Gate−to−Source Forward Leakage
25°C
150°C
mA
50
ON CHARACTERISTICS (Note 4)
Forward Transconductance
3.0
7.9
S
DYNAMIC CHARACTERISTICS
Input Capacitance (Note 5)
Ciss
1097
1373
1645
Coss
118
150
178
Reverse Transfer Capacitance (Note 5)
Crss
20
35
50
Total Gate Charge (Note 5)
Qg
23
47
68
Qgs
5.0
9.0
14
Qgd
12
26
36
Output Capacitance (Note 5)
Gate−to−Source Charge (Note 5)
Gate−to−Drain (“Miller”) Charge (Note 5)
VDS = 25 V, VGS = 0 V,
f = 1.0 MHz
VDD = 300 V, ID = 10 A,
VGS = 10 V
Plateau Voltage
VGP
Gate Resistance
Rg
6.4
0.5
1.5
pF
nC
V
4.5
W
RESISTIVE SWITCHING CHARACTERISTICS
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
VDD = 300 V, ID = 10 A,
VGS = 10 V, RG = 5 Ω
Fall Time
td(on)
15
tr
31
td(off)
40
tf
23
ns
SOURCE−DRAIN DIODE CHARACTERISTICS (TC = 25°C unless otherwise noted)
Diode Forward Voltage
IS = 10 A, VGS = 0 V
VSD
Reverse Recovery Time
VGS = 0 V, VDD = 30 V
IS = 10 A, di/dt = 100 A/ms
trr
395
ns
Qrr
3.0
mC
Reverse Recovery Charge
4. Pulse Width ≤ 380 ms, Duty Cycle ≤ 2%.
5. Guaranteed by design.
http://onsemi.com
2
1.6
V
NDF10N60Z
TYPICAL CHARACTERISTICS
20
7.0 V
14
6.4 V
12
6.2 V
10
6.0 V
8
5.8 V
6
5.6 V
5.4 V
4
4
8
12
16
20
24
14
12
10
8
TJ = 150°C
6
4
TJ = −55°C
2
5
6
7
Figure 1. On−Region Characteristics
Figure 2. Transfer Characteristics
0.75
0.70
ID = 5 A
0.65
5
6
7
8
9
10
VGS, GATE−TO−SOURCE VOLTAGE (V)
8
0.80
TJ = 25°C
VGS = 10 V
0.75
0.70
0.65
0.60
2.5
5.0
7.5
10
12.5
ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. Gate Voltage
Figure 4. On−Resistance vs. Drain Current
and Gate Voltage
10,000
2.7
VGS = 0 V
VGS = 10 V
ID = 5 A
IDSS, LEAKAGE (nA)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED)
4
VGS, GATE−TO−SOURCE VOLTAGE (V)
TJ = 25°C
2.2
3
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
0.80
0.60
TJ = 25°C
16
2
0
5.0 V
0
VDS = 30 V
18
6.6 V
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
ID, DRAIN CURRENT (A)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
10 V
16
2
0
20
VGS = 15 V
TJ = 25°C
ID, DRAIN CURRENT (A)
18
TJ = 150°C
1000
1.7
1.2
100
TJ = 100°C
0.7
0.2
−50
−25
0
25
50
75
100
125
150
10
0
100
200
300
400
500
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
http://onsemi.com
3
600
NDF10N60Z
TYPICAL CHARACTERISTICS
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
VGS = 0 V
TJ = 25°C
f = 1 MHz
3000
2500
2000
Ciss
1500
1000
Crss
500
0
Coss
0
25
50
75
100
125
150
175
20
400
ID = 10 A
TJ = 25°C
15
300
VDS
QT
10
200
Qgs
Qgd
0
0
5
10
IS, SOURCE CURRENT (A)
tr
tf
td(on)
10
25
30
35
40
45
50
0
55
8
6
4
2
0
100
VGS = 0 V
TJ = 25°C
0.4
0.5
0.6
0.7
0.8
0.9
RG, GATE RESISTANCE (W)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Source Current vs.
Forward Voltage
100
ID, DRAIN CURRENT (A)
t, TIME (ns)
10
VDD = 300 V
ID = 10 A
VGS = 10 V
1
20
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
td(off)
10
15
100
Qg, TOTAL GATE CHARGE (nC)
Figure 7. Capacitance Variation
100
VGS
5
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
1000
200
10
100 ms 10 ms
VGS ≤ 30 V
Single Pulse
TC = 25°C
1 ms
10 ms
dc
1
0.1
0.01
0.1
RDS(on) Limit
Thermal Limit
Package Limit
1
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
3500
10
100
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 11. Maximum Rated Forward Biased
Safe Operating Area for NDF10N60Z
http://onsemi.com
4
1000
1.0
NDF10N60Z
TYPICAL CHARACTERISTICS
10
R(t) (°C/W)
Duty Cycle = 50%
1 20%
10%
5%
0.1
2%
1%
0.01
RqJC = 3.2°C/W
Steady State
Single Pulse
0.001
0.000001
0.00001
0.0001
0.001
0.1
0.01
1
10
PULSE TIME (sec)
Figure 12. Thermal Impedance for NDF10N60Z
LEADS
HEATSINK
0.110″ MIN
Figure 13. Mounting Position for Isolation Test
Measurement made between leads and heatsink with all leads shorted together.
*For additional mounting information, please download the ON Semiconductor
Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
5
100
1000
NDF10N60Z
ORDERING INFORMATION
Package
Shipping†
NDF10N60ZG
TO−220FP
(Pb−Free, Halogen−Free)
50 Units / Rail
NDF10N60ZH
TO−220FP
(Pb−Free, Halogen−Free)
50 Units / Rail
Order Number
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
MARKING DIAGRAMS
NDF10N60ZG
or
NDF10N60ZH
AYWW
Gate
Source
Drain
TO−220FP
A
Y
WW
G, H
= Location Code
= Year
= Work Week
= Pb−Free, Halogen−Free Package
http://onsemi.com
6
NDF10N60Z
PACKAGE DIMENSIONS
TO−220 FULLPAK
CASE 221D−03
ISSUE K
−T−
−B−
F
SEATING
PLANE
C
S
Q
U
A
1 2 3
H
−Y−
K
G
N
L
D
J
R
3 PL
0.25 (0.010)
M
B
M
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH
3. 221D-01 THRU 221D-02 OBSOLETE, NEW
STANDARD 221D-03.
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
U
INCHES
MIN
MAX
0.617
0.635
0.392
0.419
0.177
0.193
0.024
0.039
0.116
0.129
0.100 BSC
0.118
0.135
0.018
0.025
0.503
0.541
0.048
0.058
0.200 BSC
0.122
0.138
0.099
0.117
0.092
0.113
0.239
0.271
STYLE 1:
PIN 1. GATE
2. DRAIN
3. SOURCE
Y
http://onsemi.com
7
MILLIMETERS
MIN
MAX
15.67
16.12
9.96
10.63
4.50
4.90
0.60
1.00
2.95
3.28
2.54 BSC
3.00
3.43
0.45
0.63
12.78
13.73
1.23
1.47
5.08 BSC
3.10
3.50
2.51
2.96
2.34
2.87
6.06
6.88
NDF10N60Z
PACKAGE DIMENSIONS
TO−220 FULLPACK, 3−LEAD
CASE 221AH
ISSUE B
A
E
B
P
E/2
0.14
M
B A
M
SEATING
PLANE
A
H1
A1
4
Q
D
C
NOTE 3
1 2 3
L
L1
3X
3X
b2
c
b
0.25
M
B A
M
C
A2
e
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. CONTOUR UNCONTROLLED IN THIS AREA.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH
AND GATE PROTRUSIONS. MOLD FLASH AND GATE
PROTRUSIONS NOT TO EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE TO BE MEASURED AT OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. DIMENSION b2 DOES NOT INCLUDE DAMBAR
PROTRUSION. LEAD WIDTH INCLUDING PROTRUSION
SHALL NOT EXCEED 2.00.
DIM
A
A1
A2
b
b2
c
D
E
e
H1
L
L1
P
Q
MILLIMETERS
MIN
MAX
4.30
4.70
2.50
2.90
2.50
2.70
0.54
0.84
1.10
1.40
0.49
0.79
14.70
15.30
9.70
10.30
2.54 BSC
6.70
7.10
12.70
14.73
--2.80
3.00
3.40
2.80
3.20
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
8
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NDF10N60Z/D