IC IC SMD Type Product specification KRF7401 Features Generation V Technology Ultra Low On-Resistance N-Channel Mosfet Surface Mount Available in Tape & Reel Dynamic dv/dt Rating Fast Switching Absolute Maximum Ratings Ta = 25 Parameter Symbol Rating 10 Sec. Pulsed Drain Current, VGS @ 4.5V,Ta = 25 ID 10 Continuous Drain Current, VGS @ 4.5V,Ta = 25 ID 8.7 Continuous Drain Current, VGS @ 4.5V,TC = 70 ID 7 Pulsed Drain Current*1 IDM 35 Power Dissipation PD Linear Derating Factor Gate-to-Source Voltage VGS Peak Diode Recovery dv/dt*2 2.5 Unit A W 0.02 W/ 12 V dv/dt 5 Operating Junction and Storage Temperature Range TJ,TSTG -55 to + 150 Maximum Junction-to-Ambient R JA 50 V/ns /W *1 Repetitive rating; pulse width limited by max. junction temperature. *2 ISD 4.1A, di/dt 100A/ s, VDD V(BR)DSS,TJ 150 http://www.twtysemi.com [email protected] 4008-318-123 1 of 2 IC IC SMD Type Product specification KRF7401 Electrical Characteristics Ta = 25 Parameter Symbol Drain-to-Source Breakdown Voltage Testconditons VGS = 0V, ID = 250A V(BR)DSS Breakdown Voltage Temp. Coefficient V(BR)DSS/ Static Drain-to-Source On-Resistance RDS(on) Gate Threshold Voltage VGS(th) gfs TJ Min Typ 20 0.044 ID = 1mA,Reference to 25 IDSS Drain-to-Source Leakage Current Gate-to-Source Forward Leakage IGSS Gate-to-Source Reverse Leakage VGS = 4.5V, ID = 4.1A*1 V/ 0.022 0.030 VDS = VGS, ID = 250 A 0.70 V VDS = 15V, ID = 4.1A*1 11 S VDS = 16V, VGS = 0V 1.0 VDS = 16V, VGS = 0V, TJ = 125 25 VGS = 12V 100 VGS = -12V -100 Total Gate Charge Qg ID = 4.1A 48 Gate-to-Source Charge Qgs VDS = 16V 5.1 Gate-to-Drain ("Miller") Charge Qgd VGS = 4.5V,*1 20 Turn-On Delay Time td(on) VDD = 10V 13 tr ID = 4.1A 72 td(off) RG = 6.0 65 Fall Time tf RD = 2.4 Intermal Drain Inductance LD 2.5 Internal Source Inductance LS 4.0 Rise Time Turn-Off Delay Time Unit V VGS = 2.7V, ID = 3.5A*1 Forward Transconductance Max A nA nC ns 92 *1 nH Input Capacitance Ciss VGS = 0V 1600 Output Capacitance Coss VDS = 15V 690 Reverse Transfer Capacitance Crss ƒ= 1.0MHz 310 Continuous Source Current Body Diode) pF IS 3.1 ISM 35 A Pulsed Source Current Body Diode) *2 Diode Forward Voltage VSD TJ = 25 , IS = 2.0A, VGS = 0V*1 1.0 V ns Reverse Recovery Time trr TJ = 25 , IF = 4.1A 39 59 Reverse RecoveryCharge Qrr di/dt = 100A/ 42 63 Forward Turn-On Time ton Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) *1 Pulse width 300 s; duty cycle s*1 C 2%. *2 Repetitive rating; pulse width limited bymax http://www.twtysemi.com [email protected] 4008-318-123 2 of 2