TO-92 Packing Specification 1. Taping specification Taping Specification Packaging Type Packaged quantity (Pcs) AT Ammo Tape 2,000 2. Taping dimension Unit : mm Item Symbol SPEC. Typ. Tolerance Component body width A1 4.6 +0.1/-0.12 Component body height A 4.6 +0.1/-0.12 Component body thickness T 3.56 +0.1/-0.16 Component lead thickness d 0.48 +0.05/-0.09 Pitch of component P 12.7 ±0.5 Feed hole pitch P0 12.7 ±0.2 Center of feed hole to center lead P2 6.35 ±0.5 FI,F2 2.5 +0.4/-0.1 Component alignment Δh 0.0 ±1.0 Carrier Tape width W 18.0 +1.0/-0.5 Adhesive tape width W0 6.0 ±0.5 Tape feed hole location W1 9.0 ±0.5 Adhesive tape position W2 1.0 MAX. H 21.0 MAX. Lead pitch Center of feed hole to bottom of component Center of feed hole to lead form H0 Component height H1 27.0 MAX. Lead enclosure L1 2.5 MIN Center lead-wire (tape portion) L2 2.7 MIN. Clipped lead height L3 11.0 MAX. Tape feed hole diameter D0 4.0 ±0.2 t 0.65 ±0.2 Total taped package thickness KSA-A0A000-003 16.0 remark reel taping ±1.0 H + A ≤ H1 ±0.5 1 3. Taping direction 4. Packing method Side Product Bipolar TR FET E B, C E B or C SOURCE DRAIN REG IC OUT INPUT Shunt IC REF Cathode S71XX VCC VOUT KSA-A0A000-003 2 5. Dimensions of Box 1) Inner Box Inner Box LABEL DO NOT OPEN EXCEPT AT APPROVED FIELD FORCE PROTECTIVE WORK STATION RoHS Pb Pb-free G.P RoHS compl i ant DVC : KODENSHI AUK www.kodenshiauk.co.kr LOT : KODENSHI AUK Q’TY : W/D : www.kodenshiauk.co.kr S/N : MADE IN XXXXX (1) Dimension : 329(L)×162(W)×42(H) (mm) (2) Quantity : 2Kp per each Inner Box 2) Out Box Out Box LABEL DVC : LOT No : Q’TY : BOX No : (1) Dimension : 523(L)×344(W)×239(H) (mm) (2) Quantity : contain 15ea Inner Box (Total 30Kpcs) 6. Other standards KSA-A0A000-003 3