TAPED LED LAMP SELECTIONGUIDE : Tx x xx x A: ANIDE LEAVE FIRST B: CATHODE LEAVE FIRST FEED HOLE TO BOTTOM OF COMPONENT OPTIONS (H1) S: 2.54mm PITCH STRAIGHT LEADS. F: 5.08mm PITCH PREFORMED LEADS R: REEL TYPE B: AMMO TYPE TAPED REEL TYPE : SPECIFICATION ITEM SYMBOL Minimum Maximum mm inch mm inch Rell Diameter D 78.20 3.079 380.00 14.96 Core Diameter D1 34.90 1.374 102.00 4.02 Hub Recess Inside Diameter D2 28.60 1.126 88.00 3.47 Arbor Hole Diameter D3 13.80 0.543 38.10 1.50 Overall Reel Thickness T － － 57.20 2.25 Inside Reel Flange Thick T1 30.00 1.181 50.00 1.97 AMMO TYPE : SPECIFICATION ITEM SYMBOL Minimum Maximum mm inch mm inch Overall Length L 325.00 12.80 340.00 13.40 Overall Width W 245.00 9.65 276.00 10.87 Overall Thickness H 50.00 1.97 60.00 2.36 TAPED LED LAMP ITEM SYMBOL Tape Feed Hole Diameter Straight Leads Preformed Lead Component Lead Pitch Front To Rear Deflection Feed Hole To Seating Plane Straight Leads Feed Hole To BottomOf Component Proformed Leads TxS18x TxS22x TxS26x TxF18x TxF20x TxF23x Feed Hole To Overall Component Lead Lenghth After Component Height Feed Hole Pitch Straight Leads Preformed Leads Lead Location Center Component Location Overall Taped Package Thickness Feed Hole Location Adhesive Tape Width Adhesive Tape Position Taped Width D F ∆H H H1 H1 H2 L P P1 P1 T W0 W1 W2 W3 TxSxxx (2.54 PITCH STRAIGHT LEADS) TxFxxx (5.08 PITCH PREFORMED LEADS) Notes: 1. The permission of fallen off is within continous 3 pcs. 2. The edge of the tape has the space longer than at last 4 LEDS. SPECIFICATION Minimum Maximum mm inch mm inch 3.80 2.30 4.80 14.50 17.50 21.50 25.50 17.50 19.50 22.0 - 0.149 0.091 0.188 0.571 0.689 0.846 1.004 0.689 0.748 0.886 W0 12.40 4.40 3.15 5.05 8.50 14.50 0 17.50 0.488 0.173 0.124 0.198 0.334 0.571 0 0.689 4.20 3.00 5.80 2.00 15.50 18.50 22.50 26.50 18.50 20.50 23.50 32.00 11.00 13.00 5.80 45.5 7.56 1.42 9.75 15.50 4.00 19.00 0.165 0.118 0.228 0.078 0.610 0.728 0.886 1.043 0.767 0.826 0.965 1.259 0.433 0.511 0.228 0.179 0.301 0.056 0.384 0.610 0.157 0.748